Products in Building & Construction: Chemical Resistant

Raycrete SL is a cementitious polyurethane with high mechanical and chemical resistance and without solvents. Its properties make it a very suitable pavement for applications in the food industry, in food processing plants or for the chemical and pharmaceutical industries. The mortar self-leveling Raycrete SL is a real wonder for applications on all those floors subjected to significant aggressions of cleaning and disinfection. This makes it ideal for applications in the food industry.

GRANICOAT® Solids is a revolutionary solid surface material, factory applied by a fabricator, using conventional spray equipment.

DurPack® Non-Cross Linked Polyethylene Foam has straight bond structure and it is produced with extrusion method with chemicals and inflator gas addition. Compared to our cross-linked polyethylene foam product DurProx and DurSolex, DurPack (Non-cross Linked Polyethylene Foam) has straight bond structure and it is produced with extrusion method with chemicals and inflator gas addition. Compared to our cross-linked polyethylene foam product DurProx and DurSolex, DurPack is more economical and is mostly used in the application areas where the standards are not as demanding. DurPack is used for sound, heat and humidity insulation and shock protection. DurPack is more economical and is mostly used in the application areas where the standards are not as demanding. DurPack is used for sound, heat and humidity insulation and shock protection.

Trimafloor 2750 is a fast drying, two pack epoxy, water based gloss floor paint.

Rust Bullet® DuraGrade™ Concrete is a high-performance concrete coating that can be applied directly onto concrete surfaces without any acid etching. Rust Bullet® DuraGrade™ Concrete is a single component urethane resistant to UV rays, acid splash and chemical solvents. It is ideal for any indoor or outdoor concrete surface. Due to its UV resistance and adhesion properties, Rust Bullet® DuraGrade™ Concrete requires no topcoat or base/primer coat. Apply by brush, roller, or spray equipment. VOC compliant in all 50 states.

Lamatek Neoprene Sponge Gasket Tape SCE-43B is a closed cell blend of neoprene sponge, EPDM and synthetic rubber with a dense mass of tiny pores (or cells) to seal out air, moisture, liquid, gas, oil and more. Neoprene rubber tape is ideal for higher temperature applications where the seal isn’t frequently re-opened or broken. Lamatek’s neoprene rubber tape is available in several grades from soft to firm to absorb various weights and compression levels.

Alkor® Mortar is a specially formulated furan mortar for chemical resistant brick construction.

Monochem 21 is a 2-component, 100% solids, high-build, liquid applied, Polyamine, Cyclo-Aliphatic Epoxy. Monochem 21 is available in high gloss, clear, standard colors and can be mixed with decorative chips, color micas, or silica sand. It is designed as a high performance primer, base coat or interior top coat.

Michem® Emulsion 47950 is effective as a sacrificial anti-graffiti coating and can also contribute water and corrosion resistance to industrial and wood coatings. This product also provides lubricity and serves as a mold release for industrial molding applications.

Eco-Tite 5575 (Hybrid) is a one component, high modulus, fast curing, multipurpose silyl-terminated polyether (hybrid) elastomeric adhesive. When fully cured, this unique VOC compliant formula offers UV stability and tenacious stress free adhesion to PVC, concrete, glass, aluminum, painted surfaces, wood, plywood, marble, metal, plus many other common substrates. This product is specifically formulated to offer all weather performance to meet today's Green Building Standards.

CHEM-FLOOR is a two-component, 100% solids, high modulus, high gloss, heavy duty, clear or pigmented epoxy floor coating system. CHEM-FLOOR system is used as a protective floor coating for concrete floors and as a high gloss seal coating for heavy-duty epoxy mortar screeds. The system is also used as a high gloss coating, non-slip aggregate flooring. It has an excellent abrasion and chemical resistance.

GRANICOAT® Sparkle is a revolutionary solid surface material, factory applied by a fabricator, using conventional spray equipment.

QuestMark Flooring Standard Food Formulation Epoxy Patch - CM2123 is a three component 100% solids epoxy mortar designed for applications where floors are subjected to repeated exposure to hot water cleanings.

Soudaseal CL is an SMX® adhesive/sealant. A crystal clear product without compromising performance.

Crystal Clear 951 is a medium viscosity penetrating sealer for stamped concrete, pavers, natural stone, etc. where a low sheen is required. Fast drying and contains a minimum of 15% solids.

GRANICOAT® Alicon is a revolutionary solid surface material, factory applied by a fabricator, using conventional spray equipment.

Anchor Bond® Anchor Thane® Topcoat (Pigmented) is a two component Aliphatic Poly aspartic coating. It is a UV light stable, high performance polymeric system that exhibits superior chemical resistance to oil, grease, strong detergents and a variety of solvents. Its ability to cure quickly enables flooring projects to be completed in shorter periods of time, therefore creating less down time for production.

Chase Corporation Plasgard 410 Epoxy Coating is a two-part, high-build, solvent-free epoxy coating.

Heavy Duty Non Fibered Asphalt Emulsion is a homogenous blend of selected petroleum bitumen, water and non-asbestos mineral stabilizers. Heavy Duty Non Fibered Asphalt Emulsion is manufactured using a state-of-the-art, colloid milling process to ensure a smooth, uniform consistency.

Cactus Industrial PMMA-Based Self Leveling Mortar is a solvent-free, fast-reactive, flexibilised and filled self-smoothing mortar. It’s a 3-component methacrylate compound that delivers outstanding impact resistance, while its high elasticity ensures lasting crack-bridging. This is a versatile technology that can be used a hard wearing layer for waterproofing, thick-film layer and equalizing layer. It is a solvent-free, 3-component, fast-reactive, flexibilised and filled PMMA-based self-leveling mortar.

Anchor Paint Manufacturing SAF-T-GARD II Enamel Series 0900 is a high quality, low VOC, high solids, interior/exterior alkyd resin coating characterized by excellent durability, gloss, and color retention.

Precision Epoxy Products SC-15N is a clear system formulated for use in machine shops for leveling a wide variety of applications from table tops to linear rail mounting platforms. It offers unparalleled adhesion to properly prepared steel surfaces without delamination. SC-15N is very durable, chemically resistant and is a poured application with advanced leveling characteristics for extreme accuracy. This version is used for laminating surfaces that may need to be visible under the epoxy overlay.

HBS-200 Rubber Tix is Universal, thixotropic, durable, waterproof, airtight and protective coating. HBS-200® Rubber Tix has a high viscosity, making it ideal for vertical applications and fast layer build-up. .

AcryLinkG is a single component, high-solids acrylic elastomeric roof coating that is combined with a custom engineered, technologically advanced, cross-linking resin. AcryLinkG can be brushed, rolled or sprayed over a multitude of commercial roof systems. This unique formulation of environmentally conscious chemicals provides a seamless and robust barrier of protection from the elements, while expanding and contracting with your roof, making it unlike any product of its kind.

RC 1650 Acrylic Seam Compound is a high quality, high solids, acrylic elastomeric seam sealer designed to bridge and seal seams, gutters, vent pipe flashings, air conditioning units and expansion joints for all types of roofing substrates. RC 1650 has excellent weatherability and ultraviolet resistance. RC 1650 also offers a flexible, durable sealer with excellent resistance to mechanical or chemical attacks.

GRANICOAT® Alexander is a revolutionary solid surface material, factory applied by a fabricator, using conventional spray equipment.

Cruspec 6000 2K Water Base Epoxy is an extremely durable, easy to apply epoxy. Excellent abrasion, chemical resistance, & low VOC. Brush, roll, or spray.

Arabian Chemical Industries ISOBOND is a liquid latex admixture based on styrene butadiene rubber that is designed as an integral adhesivefor cementitious system. Mortars and concrete prepared from ISOBOND has excellent adhesion properties, chemical resistant, high strength, and waterproof. It has excellent resistance to hydrolysis (unlike PVA-based bonding system) and will perform very well under humid conditions and other applications subject to continuous and/ or alternate wettingand drying.

Eurogrip 125 is a high friction flooring system designed mainly for internal use. It is capable of sustaining normal factory loading including fork lift trucks. A combination of though and durable epoxy resin and high friction grit, Eurogrip 125 is applied to prepared and primed concrete or metal substrates. It is supplied in a wide range of colors it can also be used for delineation of pedestrian and vehicle areas.

Pilgrim Permocoat EM 5-2 is a versatile system with excellent physical and chemical properties. High strength, solvent free adhesives for structural bonding, grouting, dowel or rebar anchoring. Use neat as an adhesive or mix with an aggregate as a no-shrink mortar for patching and topping, for splicing concrete piling, for leveling heavy equipment and for anchoring bolts. Use as a bonding adhesive between plastic concrete and hardened concrete. Use on dry or damp substrates.

Excel-Thane “MCU-400” is CLEAR polyurethane sealers for decorative concrete that are moisture cured, abrasion resistant, and stain resistant. Its foundation is an aliphatic (non-yellowing) isocyanate with a polyester backbone. When cured, Excel-Thane “MCU-400" is a CLEAR with a high gloss finish.

The TE06 Powder coatings are thermosetting paints, which means that when heated, they transform irreversibly into a very hard adherent plastic material with a high index of resistance to most chemical agents, resulting in high-quality coatings in a single layer that can be shiny, satin, matte, textured, granite, transparent, metallic, and so on. Its physical composition is 100 percent dry extract, which can be applied using various electrostatic processes on a variety of supports (metal, glass, ceramics, and so on), followed by a predetermined stuffing.

Avery Dennison™ FM 2454 is a 35 mil double coated black polyethylene foam with a moisture resistant acrylic adhesive. It bonds very well to glass and ceramic, including in moist environments. It is commonly used in exterior automotive applications.

Crown Foam Technologies Flame Vexator PVC Foam is a multi-purpose foam for applications that require measurable flame resistance. PVC foams are inherently resistant to a wide range of chemicals, UV rays and has moderate flame resistance. It seals out air & moisture.

SPARTACOTE® Surface Build UV is a high solids, UV resistant, self-leveling epoxy for decorative and protective applications. Ideal for use as a build or topcoat in SPARTACOTE epoxy flooring systems it exhibits excellent durability and wear characteristics combined with high chemical resistance. Provided as a clear epoxy product it can be field pigmented through the use of SPARTACOTE Universal Pigments.

WET!™ Color Enhancer & Sealer has excellent resistance to abrasion and chemicals, including salt. The penetrating nano particles of ICT WET! (157) Allows the product to soak into the surfaces of porous substrates, such as brick pavers, to stabilize joints and loose sand within, while also enhancing the color of the surface being sealed. ICT WET! (157) Is non-yellowing, once cured, and will form a very hard protective coating for brick pavers, porous concrete & masonry surfaces. The durability and resistance to chemicals and salt of ICT WET! (157) makes it great for application on sidewalks, pool decks, and driveways. Exterior use only.