Products in Building & Construction: Chemical Resistant

ACCU-GROUT products are three-component, pre-proportioned, industrial grade epoxy grouting systems. ACCU-GROUT LE is a low exotherm, high strength construction epoxy. The recommended application temperature range for the grout products is between 60°F - 95°F (16°C - 35°C).

Cactus® Double Coated Foam Tape G488B is a solvent-based acrylic pressure-sensitive adhesive that offers a very high grab tack and peel adhesion level, with an easy remove liner, excellent for applications requiring immediate and durable bonding results.

CRACKBOND® 2100 MV Class B and 2100 MVLPL (Long Pot Life) products are two-component, high strength epoxy adhesives that are ideal for bonding fresh to hardened concrete or perfect for use in a variety of repair projects. CRACKBOND 2100 MV may be used in temperatures between 40°F and 100°F (4°C and 38°C), while CRACKBOND 2100 MV-LPL, with its slower cure rate, may be used in temperatures between 60°F and 110°F (16°C and 43°C).

Avery Dennison™ FM 2316 is a 68 mil double coated white polyethylene foam with a modified acrylic adhesive. It bonds well to low surface energy materials and has the ability to fill gaps. It is commonly used in general industrial foam applications.

TCG-10 is an Alumina-Filled Thermally Conductive Grease with a 550°F melting point.

Blome International Sealant 72R is a two-component, pour grade polyurethane sealant with good chemical resistance and excellent elongation properties. It exhibits excellent resistance to most acids, alkalis and salts. It has excellent adhesion to a variety of substrates including concrete, tile, steel and brick. Blome Sealant 72R is highly resilient and retains its elastomeric properties over a temperature range of -80°F to 140°F. It also has very good curing characteristics for fast turnaround.

DurProx® Physically Crosslinked Polyethylene Foamcan be produced with advanced technology, have superior mechanical properties and an advanced dimensional stability. The product is extruded with the help of additives and lastener's which is followed by the electron beam process. After the electron beam process with hot oven operation the physical characteristic of the product increases by means of dilatation, and a product with a very closed-cell structure and a smooth surface is obtained. It can be produced for different sectors in cut plate, roll, tube, extra-laminated or non-laminated forms.

Eclectic E6100 Industrial Adhesive (Clear) is a unique NON-SAG, non-flammable industrial adhesive formulated to meet highperformance requirements. It permanently adheres to more surfaces than virtually any other adhesive, providing exceptional adhesion to wood, metal, glass, fiberglass, ceramics, masonry, concrete, asphalt, leather, rubber, PVC, neoprene, vinyl and many plastics. This NON-SAG formula will not drip or run and is highly recommended for use in applications requiring vertical hold. E6100 maintains its flexible bond in extreme cold temperatures, will not crack or become brittle and is excellent for bonding items subject to vibration. For applications exposed to direct sunlight, paint over E6100 after curing.

Ply-Guard WBAC is a water reducible acrylic finish coating that offers extended exterior durability when used in moderately harsh environments. It provides excellent gloss and color retention. Ply-Guard WBAC is highly resistant to dirt pick-up and has chemical resistance superior to conventional coatings. It is approved by many state D.O.T.’S for use on bridges.

Monochem 21 is a 2-component, 100% solids, high-build, liquid applied, Polyamine, Cyclo-Aliphatic Epoxy. Monochem 21 is available in high gloss, clear, standard colors and can be mixed with decorative chips, color micas, or silica sand. It is designed as a high performance primer, base coat or interior top coat.

Eco-Tite 5575 (Hybrid) is a one component, high modulus, fast curing, multipurpose silyl-terminated polyether (hybrid) elastomeric adhesive. When fully cured, this unique VOC compliant formula offers UV stability and tenacious stress free adhesion to PVC, concrete, glass, aluminum, painted surfaces, wood, plywood, marble, metal, plus many other common substrates. This product is specifically formulated to offer all weather performance to meet today's Green Building Standards.

HercuLean HercuLean™ H140 25mm can be used as a stand-alone structural foam or as a core material for laminates to provide high-strength structure in a variety of applications. Nomaco has the capability to provide extruded profiles, planks, and sheet stock in multiple thicknesses and densities, designed to performance specifications required. Nomaco can produce large, one-piece sheet stock with fabrication equipment for cut-to-size needs, providing our customers with a vast scope of design possibilities.

Blome International Sealant 43 is a two-component, high elongation polyurea sealant with excellent chemical resistance, high bond strength and exceptional elongation properties. Blome Sealant 43 is designed for up to 20% linear movement of installed joint width. It exhibits excellent resistance to most mineral acids, dilute organic acids, alkaline solutions, oxidizers and salts. It has excellent adhesion to a variety of substrates including concrete, tile, steel and brick. Blome Sealant 43 is highly resilient and retains its elastomeric properties over a temperature range of -10°F to 140°F. The material exhibits rapid curing characteristics for fast turnaround.

Anchor Bond® Anchor Thane® Topcoat (Clear) is a two component aliphatic poly aspartic coating. It is a UV light stable, high performance polymeric system that exhibits superior chemical resistance to oil, grease, strong detergents and a variety of solvents. Its ability to cure quickly enables flooring projects to be completed in shorter periods of time, therefore creating less down time for production.

Alkor® Mortar is a specially formulated furan mortar for chemical resistant brick construction.

Eco-Tite 5555 (Hybrid) is a one component, medium modulus, fast grab, high green strength, multipurpose silylterminated polyether (hybrid) elastomeric sealant. When fully cured, this unique VOC compliant formula offers UV stability and tenacious stress free adhesion to PVC, concrete, glass, aluminum, painted surfaces, wood plywood, marble, metal, plus many other common substrates. This product is specifically formulated to offer all weather performance to meet today’s Green Building Standards.

Michem® Emulsion 47950 is effective as a sacrificial anti-graffiti coating and can also contribute water and corrosion resistance to industrial and wood coatings. This product also provides lubricity and serves as a mold release for industrial molding applications.

Crown Foam Technologies Medium Density Vinyl Foam 10#-14# is the perfect solution for the more challenging environment that partners flexibility and wear-resistance. CVM114 is available in duel density, multi layered colored logs.

Lamatek Neoprene Sponge Gasket Tape SCE-43B is a closed cell blend of neoprene sponge, EPDM and synthetic rubber with a dense mass of tiny pores (or cells) to seal out air, moisture, liquid, gas, oil and more. Neoprene rubber tape is ideal for higher temperature applications where the seal isn’t frequently re-opened or broken. Lamatek’s neoprene rubber tape is available in several grades from soft to firm to absorb various weights and compression levels.

Cactus Industrial PMMA-Based Anti Slip Paint is a solvent-free, 3-component heavy-duty anti-skid flooring system that’s designed for areas subject to extreme abrasion and wear. This specialist, durable flooring coating delivers excellent grip properties for indoor and outdoor use where a sure foothold is required. It’s suitable for all conditions, including wet environments. The system offers fine, medium and coarse aggregate for a suitable textured finish on steel, concrete and other substrates.

UREA-TUFF 4260 is a two-component, liquid-applied hybrid polyurea elastomer designed for use as a mix-in-the-bucket, but yet rapid-curing, monolithic waterproofing membrane. is a solvent-free aromatic polyurea-polyurethane elastomer containing no tar or asphaltic extenders.

Diamite AGC is a water-based epoxy coating intended to protect a wide range of substrates from graffiti abuse. Diamite AGC is resistant to spray paint, ink, crayons and harsh chemicals and may be applied to virtually any sound, clean and dry surface. Diamite AGC provides a smooth, attractive and easy-toclean surface.

Protecto Wrap 350-35 Butyl™ pipe wrap is designed for pipelines and girthwelds for wrapping wastewater pipelines providing exceptional cathodic protection. The superior corrosion resistance of our butyl adhesive combined with a tough purple TPO facer provides exceptional corrosion resistance where required.

PERMACOAT 6500 is a 100% solids epoxy novolac containment and/or floor coating system. The PERMACOAT 6500 is specifically designed as a containment product for industrial solvents and acids. PERMACOAT 6500 consists of two components, resin and hardener, in both the horizontal and vertical formulations. The application of the PERMACOAT 6500 is accomplished with rubber squeegees and short nap paint rollers.

ACCELERA® SATIN FINISH TOPCOAT is a part of the ACCELERA family of fast-track, seamless floor systems. It is a two component proprietary blend of polymers featuring a fast-curing clear, satin finish. It is applied as a final topcoat over a grout coated ACCELERA decorative vinyl chip or quartz broadcast floor systems. It is UV stable and offers excellent chemical resistance.

Res-Tek EPO-Guard™ EPO-205 Top Coat is a low odor, 100% solids, 2-component, viscous, epoxy coating. This product may be clear or pigmented and has an orange peel texture. This product is designed for use in vertical applications or as an optional topcoat for decorative quartz and flake flooring systems.

ConoCrete General Purpose 101 is a chemically-resistant, 100% solids, aggregate-filled, general purpose epoxy floor system. It is ideal for resurfacing old and protecting new concrete floors from chemical and physical abuse. The physical properties of this material far exceed those of concrete, providing a more durable surface with greater chemical resistance.

UNIFOAM® XVA 60 is made from high-quality ethylene vinyl acetate copolymer.

Raycrete SL is a cementitious polyurethane with high mechanical and chemical resistance and without solvents. Its properties make it a very suitable pavement for applications in the food industry, in food processing plants or for the chemical and pharmaceutical industries. The mortar self-leveling Raycrete SL is a real wonder for applications on all those floors subjected to significant aggressions of cleaning and disinfection. This makes it ideal for applications in the food industry.

GRANICOAT® Solids is a revolutionary solid surface material, factory applied by a fabricator, using conventional spray equipment.

Cling Foam® C800 Cling Foam offers a choice of materials depending upon the requirements of the application. The C800 Series is low density closed-cell Polyvinyl Chloride foam with the unique ability to bond to non-porous surfaces without an adhesive.It comes on a special "high gloss" paper to protect the cling surface. "Cling Foam " leaves no residue when removed. C810 is the same low density product; coated on the opposite laminating side with a pressure-sensitive adhesive.

Highland International 74-IS is a thin film 2-K Hybrid Epoxy Novolac Liner Coating that offers exceptional temperature and chemical protection. Specifically formulated for In Situ application, 74-IS Series provides superior barrier properties against acidic, caustic, and high heat environments. Chem-Temp 74-IS Series also offers excellent adhesion and corrosion resistance with a temperature rating of 250˚F for immersion and 350˚F for dry heat, making it the premium choice for high performance against corrosive cargo.

Excel-Thane “MCU-250” is CLEAR polyurethane sealers for decorative concrete that are moisture cured, abrasion resistant, and stain resistant. Its foundation is an aliphatic (non-yellowing) isocyanate with a polyester backbone. When cured,Excel-Thane “MCU-250” is a CLEAR with a high gloss finish.

Rust Bullet® DuraGrade™ Concrete is a high-performance concrete coating that can be applied directly onto concrete surfaces without any acid etching. Rust Bullet® DuraGrade™ Concrete is a single component urethane resistant to UV rays, acid splash and chemical solvents. It is ideal for any indoor or outdoor concrete surface. Due to its UV resistance and adhesion properties, Rust Bullet® DuraGrade™ Concrete requires no topcoat or base/primer coat. Apply by brush, roller, or spray equipment. VOC compliant in all 50 states.

MICORTHANE™ 9-82 is a clear two component polyurethane c0ating that provides excellent chemical and abrasion resistance combined with superior wearability and color retention. Its rapid cure and property development make it an excellent choice for interior and exterior maintenance applications on concrete, metal or wood. MICORTHANE™ 9-82 is recommended as an architectural coating, a heavy-duty industrial maintenance coating, a coating for water treatment facilities and food processing facilities, as well as a host of other applications where corrosion and abrasion resistance and superior protection are important. U.S.D.A. approved for incidental food contact.

YELLOW GAS LINE PTFE TAPE is a high density PTFE Tape specifically formulated for use on natural gas, propane and butane lines.