Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Product Type
- Finish
- Eggshell
- Vehicle Type
- Hybrid Epoxy Novolac
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Advantages
- Next generation polymer technology specifically engineered for heat stability and chemical resistance
- Dry heat stability up to 300°F, immersion up to 250°F
- Superior resistance to a wide variety of chemicals and solvents
- Low Temperature Cure to 0°F
- Superior abrasion resistance
- Superior adhesion even over marginally prepared surfaces
- Excellent corrosion resistance
- Ease of application
- Specially engineered inert filler package provides superior barrier properties
- Superior substrate wetting provides excellent adhesion and corrosion protection
- Ultra-high crosslink density provides a tough durable film with long lasting protection
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Dry Time
20°F 40°F 60°F 80°F Minimum Recoat: 26 hrs. 9 hrs. 5 hrs. 4 hrs. Dry Hard: 53 hrs. 17 hrs. 10 hrs. 7 hrs. Maximum Recoat: 30 days 30 days 30 days 30 days Full Cure: 3-7 Days (force cure optional)
- Return to Service
40°F 50°F 70°F 7 Days 5 Days 3 Days Return to service recommendations are based on DSC Scanning to determine % cure, obtained by 3rd party testing facility. Full test report available upon request.
- Surface Preparation
All surfaces should be clean, dry and free of all foreign contaminants.
A SSPC-SP1 Solvent Cleaning with Highland 901 Cleaning Solvent is recommended before blasting or other cleaning method.Carbon Steel - Immersion:
Obtain a 2-3 mil angular blast profile using one of the recommended methods below.
Best: A SSPC-SP5/NACE 1 White Metal Blast Cleaning is recommended for maximum coating performance and longevity.
Good: A SSPC-SP10/NACE 2 Near White Metal Blast Cleaning provides good results.Carbon Steel - Non-Immersion:
Obtain a 2-3 mil angular blast profile using one of the recommended methods below.
Best: A SSPC-SP10/NACE 2 Near White Metal Blast Cleaning is recommended for maximum coating performance and longevity.
Good: A SSPC-SP6/NACE 3 Commercial Blast Cleaning provides good results.Galvanized Steel: Contact a Highland representative as recommendation will vary depending on substrate and exposure conditions.
Note: The second coat/topcoat must be applied within 36 hours at 77˚F or the surface will need to be scuffed.
- Mixing & Application
Mixing: Highland 74-IS Series needs to be thoroughly mixed using mechanical agitation. Mix entire contents of Part “A” Activator (74-IS-100) with Part “B” Base (74-IS-####) (1:1 by volume) Product is ready to apply after proper mixing and a 30 minute induction period.
Reduction: Reduction is not required, if desired, reduce by 0% - 10% with Highland #740 reducer.
Highland 74-IS Series is designed for In-Situ Application. To ensure optimal performance, apply according to recommendations below.
PIGing Application: Information proprietary based on contractor experience
Brush or Roller: Both are acceptable for touch up.
Spray Application: Acceptable for touch up – May Require Reduction
Clean Up: Highland #901 Cleaning Solvent
- Typical Systems
Standard/Immersion Service: Apply 10-16 mils DFT of 74-IS Series in 2-4 uniform coats.
Properties
- Color
- Typical Properties
Value Units Test Method / Conditions Dry Film Thickness 10 - 16 Mils - Flash Point 16.0 °F - Heat Resistance (Immersion Services) 250.0 °F - Heat Resistance (Dry Heat Services) 300.0 °F - Mix Ratio 1:1 Base to Activator - - Storage Temperature 20 - 110 °F - Theoretical Coverage (1 Mil DFT) 1187.0 ft²/gal. - VOC max. 247 g/L - Solids (by Volume) 74.0 % - Wet Film Thickness (Per Coat) 6.8 - 10.8 mils -
Safety & Health
- Safety Information
- Use normal precautions such as gloves, facemasks and barrier creams.
- Adequate ventilation must be maintained. In confined areas, applicators must wear constant flow airline respirators.
- If product comes into contact with skin, wash thoroughly with lukewarm water or diluted Boric Acid, and obtain immediate medical attention.
- This product contains Flammable materials. Keep away from sparks and open flames. Observe no smoking regulations.
- All electrical equipment and installations should conform to NEC regulations. In areas where explosion hazards exist, workmen should be required to use nonferrous tools, and to wear conductive, non sparking shoes.
- Observe low flash regulations.
Packaging & Availability
- Packaging Type
- Packaging
10 Gallon & 1 Gallon Kits
Storage & Handling
- Pot Life (77°F)
- 3.0
- Shelf Life
- Minimum 2 Years