Printing & Packaging

SGD4960 is a high density polyethylene homopolymer especially designed for blow molding processing. It features high density and stiffness combined with high impact resistance. The minimum biobased carbon content of this grade is 96%, determined according to ASTM D6866.

Heterophasic Copolymer. The CG220NA is a medium flow rate heterophasic copolymer that combines good impact strength, stiffness and processability.

Braskem HDB0355 is a high density polyethylene copolymer (HDPE) developed for blow molding applications. This product is suitable for applications that require a good enviromental stress cracking resistance (ESCR).

Braskem HDB0358 is a bimodal high density polyethylene copolymer grade. Offers an outstanding balance between stiffness, impact strength, and Environmental Stress Cracking Resistance (ESCR) ideal for a wide range of blow molding applications. This grade is particularly well suited to chemical and detergent packaging as the exceptional ESCR can allow for significant bottle weight reduction.

MultiTech Corrosion Inhibitor A is a cyclic aliphatic diamine made of 100% reclaimed material that is used primarily in epoxy coatings and composites. It provides chemical resistance over a broad range of chemicals, which makes it a superior choice for industrial and marine coatings. Other applications include mining, oil & gas, and pharmaceutical intermediates.

BaseCase Multifunctional A is an acrylate - methacrylate monomer blend, containing 50% of trimethylolpropane triacrylate (TMPTA) and 50% hydroxyethylmethacrylate (HEMA). It polymerizes when exposed to sources of free radicals. BaseCase Multifunctional A is particularly useful in coatings where a good thermal and/or chemical resistance are important. It is recommended for use in: coatings where chemical and/or thermal resistance is required, and solder and etch resists.

Yellow Pigment is a green shade Azo Nickel Complex pigment with very good lightfastness and overall fastness properties as well as excellent heat resistance. Pigment Yellow 150 is the established standard Color Index for a green shade yellow to be used in waterbased decorative gravure printing inks. Therefore, Yellow Pigment is highly recommended for this kind of application.

VINNOL® H 40/43 is a copolymer composed of approximately 66 wt.% vinyl chloride (VC) and approximately 34 wt.% vinyl acetate (VAc). Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic binder undergoes physical drying, resulting in the formation of a film once the solvent in the formulation has evaporated.

MultiTech Multifunctional E is a colorless liquid at room temperature (20°C). It is miscible in water and organic solvents. It is a bifunctional alcohol used in the synthesis of the following products: Resins, such as polyurethanes and polyesters Polyols, such as polyesters and polycarbonates Plasticizers Piperidine

BaseCase Solvent A is an aqueous solution of an aliphatic, low molecular weight urethane diol oligomer. It is recommended as a modifier for amino crosslinked water soluble and emulsified acrylic, alkyd, urethane and polyester resins. BaseCase Solvent A can be used as a reactive cosolvent replacement to increase solids, crosslink density, improve film/resistance properties and flow/leveling.

CASE Ingredients Oligomer is a difunctional, aliphatic, polyether urethane acrylate. Films formulated with CASE Ingredients Oligomer exhibit superior physical and weathering capabilities. CASE Ingredients Oligomer may also be used to improve the flexibility, weathering, and adhesion characteristics of existing film and foil coatings.

VINNAPAS® B 100/20 VLE is an approximately 50% solution of a vinyl acetate/vinyl laurate copolymer in ethyl acetate. VINNAPAS® B 100/20 VLE can be diluted with esters, ketones, aromatic solvents, and chlorinated hydrocarbons. The solution's compatibility with alcohol is limited. VINNAPAS® B 100/20 VLE is not compatible with aliphatic compounds.