Products in Printing & Packaging: Processing Aid

MultiTech MultiFunctional T is a recycling additive for polyolefines. It is used for upcycling Polypropylene from car battery cases: Repair of damage in the polymer chains by a novel chemical system. High-quality recyclates for demanding long-term applications Prolonged retention of mechanical properties during long-term heat aging. Neutralization of acidic contaminations. One-Pack solution stabilizes the recycling process. MultiTech MultiFunctional T recycling additives improve the polyolefin recycling processes and help recyclers to produce higher-value polyolefine recyclates for long-term applications. For the first time, the new repairing technology allows repairing damages from prior use.

MultiTech MultiFunctional U is our recycling additive for polyolefins MultiTech MultiFunctional U recycling additives improve the polyolefin recycling processes and help recyclers to produce higher value polyolefine recyclates for long term applications. For the first time the new repairing technology allows to repair damages from prior use. MultiTech MultiFunctional U for Upcycling of post-industrial and post-consumer polypropylene waste streams: Repair of damage in the polymer chains by novel chemical system. High quality recyclates for demanding long term applications Prolonged retention of mechanical properties during long term heat aging. One-Pack solution stabilizes the recycling process

AEROSIL® R 972 is hydrophobic fumed silica grade treated with DDS (Dichlordimethylsilane). The moderate hydrophobicity of these AEROSIL® products is suited for defoaming properties in the presence of appropriate hydrophobic liquids. They are recomended for improving the sedimentation stability of defoamer dispersions as well.

CONSTAB PA 00833 LD is a processing aid that prevents die build-up and gives a smoother, more glossy surface. Eliminates melt fracture; reduces die build-up and extruder pressure; suitable up to 280°C processing temperatures. Reduces die buildup and extruder pressure and improves surface quality.

KAFRIT PA 0I970 LL is a polyolefin extrusion improver that enhances film clarity, gloss, and surface appearance. It reduces melt fracture, die pressure, power consumption, and processing temperature. This product is particularly suitable for industrial and transport packaging, as well as food and beverage packaging applications.

KAFRIT PA 0K060 PP is specifically formulated to mitigate die build-up and enhance processing in cast polypropylene (PP). Functioning as a high-temperature processing aid, it offers notable advantages for both blow molding and injection molding procedures. This product belongs to the additive masterbatches and processing aids product families.

CONSTAB CB 09060 LL offers a product comprised of 10% synthetic silica, 5% erucamide slip additive, and processing aid. This versatile formulation serves as both a processing aid and a slip agent, addressing packaging needs in food and beverage packaging and industrial and transport packaging.

CONSTAB PA 00833 PPR is a processing aid product that uses polypropylene (PP) as its carrier. It features high-temperature resistance, low die deposit, reduced fusion torque, and a higher gloss. This product is suitable for improving gloss and reducing die buildup.

CONSTAB PA 00852 PP is good for improved processibility, torque reduction, and gauge control. Reduces die buildup and extruder pressure, especially at very high melt temperatures up to 310 °C. Processing aids prevent die buildup and give a smoother, more glossy surface. high-temperature resistant polymer processing aid; improved melt flow; less desposites in the melt system and die capilaries; improved gloss.

CONSTAB PA 00856 LD is meticulously engineered to eliminate melt fracture and mitigate issues like die build-up, gel formulation, and extruder pressure. Its efficacy is particularly prominent when working with metallocene. It boasts a 3% content of second-generation PPPA, functioning as an indispensable processing aid. It's compatible with a carrier of polyethylene (PE), which is resin-based. A notable feature is its remarkable ability to mitigate melt fracture, effectively enhancing the extrusion process.

CONSTAB MA 00929 PP is a processing aid product that uses polypropylene (PP) as its carrier. CONSTAB MA 00929 PP features high shrinkage, good stiffness, good barrier properties, and low haze. This product consists of 60% hydrogenated c9 resin in homopolymer.

CONSTAB CB 09059 LD is composed of 10% synthetic silica and functions as both a long-term antistatic agent and processing aid. It is suitable for polyethylene (PE) and resin-based materials and serves the printing and packaging markets, especially in applications like food and beverage packaging and industrial and transport packaging.

CONSTAB CON-X® PA 810 PE is a product that functions as a processing aid. It is labelled as recyclable and sustainable and uses polyethylene (PE) as its carrier. The features include flexibility, freeze resistance, higher gloss, recyclability, clarity, low die deposit, tear resistance, and excellent seal properties.

CONSTAB PA 00833 PP is a processing aid product, but with a different carrier, polypropylenes (PP). It reduces die buildup and extruder pressure while improving surface quality. It is used in the printing and packaging market for food and beverage packaging and industrial and transport packaging applications.

KAFRIT PA 00S08 LL PA & AO is a product that offers a combination of reduced die build-up, prevention of gel formation, and an improved antioxidant (AO) package. It serves as an antioxidant and processing aid, finding applications in food and beverage packaging and industrial and transport packaging within the printing and packaging market.

CONSTAB MA 00930 PP is a processing aid product that uses polypropylene (PP) as its carrier. CONSTAB MA 00930 PP features high shrinkage, good stiffness, good barrier properties, and low haze. This product consists of 60% hydrogenated C5 resin in homopolymer.

KAFRIT PA 00S08 LD is a combination of a processing aid and an antioxidant, suitable for use in applications with high processing or melt temperatures. It effectively reduces die buildup and gel formation in cast films and pipes, contributing to smoother and more efficient processing.

CONSTAB PA 00809 LD is meticulously crafted to address key challenges in plastic extrusion, including the elimination of melt fracture, reduction of die build-up, and extruder pressure. This processing aid is optimized for applications involving blown film below 235°C and cast films. The formulation is compatible with a carrier of polyethylene (PE) grounded in a resin-based matrix. A defining attribute is its ability to effectively mitigate low-melt fracture.

Polyfil Inc’s PAC-0005FFLL-MWZ is an economical, fluoropolymer free processing aid concentrate for polyethylene extrusion that offers outstanding performance under a wide variety of extruder conditions. The non-blooming, thermally stable active ingredient can speedily coat internal die surfaces without build-up at moderate dosage levels. Benefits to PAC-0005FFLL-MWZ quality include reduction or elimination of melt fracture, die build-up, and gel formation. Improvements are seen in gloss, clarity, and physical properties of the film. Economic advantages are obtained through increased extruder output and lower scrap rates. PAC-0005FFLL-MWZ complies with FDA requirements for food contact applications and will not interfere with ink adhesion, heat seals, or laminations. The MWZ grade has a proprietary chemistry that is thermally stable at even higher temperatures than the MW, making the MWZ suitable for both blown and cast film applications.

Polyfil Inc’s PAC-0001FFLL-SP is a fluoropolymer-free processing aid concentrate for polyethylene extrusion that offers outstanding performance under a wide variety of extruder conditions. The non-blooming, thermally stable active ingredient can speedily coat internal die surfaces without buildup at low dosage levels. Benefits of PAC-0001FFLL-SP quality include reduction or elimination of melt fracture. Improvements are seen in the gloss, clarity, and physical properties of the film. Economic advantages are obtained through increased extruder output and lower scrap rates. PAC-0001FFLL-SP complies with FDA and EU requirements for food contact applications and will not interfere with ink adhesion, heat seals, or laminations.

Polyfil Inc’s PAC-0005FFLL-MW is an economical, fluoropolymer free processing aid concentrate for polyethylene extrusion that offers outstanding performance under a wide variety of extruder conditions. The non-blooming, thermally stable active ingredient can speedily coat internal die surfaces without build-up at moderate dosage levels. Benefits to PAC-0005FFLL-MW quality include reduction or elimination of melt fracture, die build-up, and gel formation. Improvements are seen in gloss, clarity, and physical properties of the film. Economic advantages are obtained through increased extruder output and lower scrap rates. PAC-0005FFLL-MW complies with FDA requirements for food contact applications and will not interfere with ink adhesion, heat seals, or laminations. The MW grade has a proprietary chemistry that provides excellent thermal stability for blown film applications.

Polyfluo® 535XF is An economical wax/PTFE combination for surface lubricity with scratch and abrasion resistance.Features and Benefits High performance product for adding slip, scratch and abrasion resistance Synergistic wax combination that enhances PTFE mobility to the coating surface PTFE dramatically enhances abrasion resistance Wax component provides improved surface slip Easy to disperse fine powder that can be incorporated with high speed mixing

Micro Powders Inc MPP-611AL is a highly engineered HDPE/alumina nanocomposite for unsurpassed scratch and scuff resistance.Features and Benefits Maximum scratch and scuff resistance with slip and lubricity HDPE composite reinforced with 300 nm aluminum oxide nanoparticles (Mohs Hardness 9) Easier-to-disperse nanotechnology in a safe, non- nano powder Composite particle density maximizes efficiency and minimizes settling Effective replacement for PTFE additives Easier-to-disperse nanotechnology in a safe, non- nano powder

Polyfluo® 900A unique ceramic fortified composite of low density polyethylene and PTFE for maximum abrasion and burnish resistance, surface durability and anti-blocking.Features and Benefits High performance product for maximizing surface abrasion resistance (Taber) and film toughness Fortified with hard, inert, semi-transparent spherical ceramic for maximum abrasion resistance Low density polyethylene provides superior surface toughness, durability and mar resistance PTFE enhances abrasion resistance, antiblocking and film hardness Easy to disperse fine powder that can be incorporated with high speed mixing

Polyfluo® 400 is a high performance wax/PTFE combination for improved surface lubricity with scratch resistance.Features and Benefits High performance product for adding slip and abrasion resistance Synergistic wax combination that enhances PTFE mobility to the coating surface High slip wax provides excellent surface lubricity PTFE dramatically enhances abrasion resistance

Propyltex® 325S is Micronized polypropylene for reducing gloss and adding consistent surface texture and structure to a wide variety of paints and coatings.Features and Benefits Provides gloss reduction with improved burnish resistance vs. silica Adds a mild texture effect to the coating surface Tough, high molecular weight polypropylene gives good durability Does not lower COF; ideal for non-skid surfaces Narrow cut mean particle size grade available for maximum texture control For a finer texture, try PropylMatte 31

Polyfluo® 302A is high performance combination of polyethylene and PTFE for improved surface lubricity with scratch resistance.Features and Benefits High performance product for adding slip and abrasion resistance Synergistic wax combination that enhances PTFE mobility to the coating surface PTFE dramatically enhances abrasion resistance High slip polyethylene provides excellent surface lubricity Easy to disperse fine powder that can be incorporated with high speed mixing

Micromide 520 is Micronized fatty amide wax for maximum surface slip, scratch resistance and release properties.Features and Benefits Adds slip, release and lubricity with an excellent surface "feel". High melting point to improve heat and block resistance. Lowers COF. Reduces dust buildup on sanding belts and increases longevity in sanding sealers.

Polyfluo® 523AL ia A highly engineered HDPE/PTFE/alumina nanocomposite for unsurpassed scratch and scuff resistance.Features and Benefits Maximum scratch and scuff resistance with slip and lubricity HDPE/PTFE composite reinforced with 300 nm aluminum oxide nanoparticles (Mohs Hardness 9) Easier-to-disperse nanotechnology in a safe, non- nano powder Composite particle density maximizes efficiency and minimizes settling Extra fine particle size provides excellent gloss retention and film clarity Composite wax/alumina particle is less abrasive on processing equipment compared to free alumina

Superslip™ 6515AL is a highly engineered HDPE/amide wax/alumina nanocomposite for maximum scratch, scuff and block resistance.Features and Benefits Maximum scratch resistance; equal to PE/PTFE additives HDPE/amide wax composite reinforced with 300 nm aluminum oxide nanoparticles (Mohs Hardness 9) Good abrasion resistance with slip and lubricity Amide wax component provides excellent antiblocking and release properties Ideal for can and container coatings; 21CFR 175.300 approved Compare to Superslip 6515XF

Polyfluo® 380A is high performance wax/PTFE combination for improved surface lubricity with scratch resistance.Features and Benefits High performance product for adding slip and abrasion resistance Synergistic wax combination that enhances PTFE mobility to the coating surface High slip wax provides excellent surface lubricity PTFE dramatically enhances abrasion resistance

Polyfluo 400XFA is high performance wax/PTFE combination for improved surface lubricity with scratch resistance.Features and Benefits High performance product for adding slip and abrasion resistance Synergistic wax combination that enhances PTFE mobility to the coating surface High slip wax provides excellent surface lubricity PTFE dramatically enhances abrasion resistance

Polyfluo® 523XF is a unique extra fine, high performance composite of polyethylene and PTFE for superior surface lubricity with scratch and abrasion resistance.Features and Benefits High performance product for adding slip, scratch and abrasion resistance Synergistic wax combination that enhances PTFE mobility to the coating surface PTFE dramatically enhances abrasion resistance High density polyethylene provides improved surface slip Extra fine particle size provides excellent gloss retention and film clarity

NatureFine H325 is Finely micronized hydrogenated castor oil for use in industrial coatings and agrochemical products.Features and Benefits Naturally derived wax Adds slip, lubricity and rub resistance to industrial and graphic arts coatings Biodegradable to OECD 302C test standard Adds hydroxyl functionality (>155) Effective dry powder binding agent Microplastic alternative

Propyltex® 270S-1518 is Micronized polypropylene for reducing gloss and adding consistent surface texture and structure to a wide variety of paints and coatings.Features and Benefits Provides gloss reduction with improved burnish resistance vs. silica Adds a mild texture effect to the coating surface Tough, high molecular weight polypropylene gives good durability Does not lower COF; ideal for non-skid surfaces Narrow cut mean particle size grades available for maximum texture control Adds texture in low bake (Low E) powder coatings

Micro Powders Inc MPP-230F is Economical grade of micronized polyethylene wax for abrasion resistance and slip.