Products in Printing & Packaging: Foaming Agent

KAFRIT FM 00957 LD is an endothermic foaming agent. This product is used to reduce density and provide thermal insulation. It's suitable for resin-based materials, including polyethylenes (PE) and polypropylenes (PP). It's commonly used in the printing and packaging market for applications such as food and beverage packaging and industrial and transport packaging.

JetFil® 575P is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® M600 is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetWhite 7D is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® M700c is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® P150 COR is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® 750C is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® M500c is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® 3CC is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® 7C is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® M700 is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® T-FDC is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® M600c is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® 575C is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® 625H is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

KAFRIT FM 00D41 LD offers a highly concentrated endothermic foaming agent that eliminates sink marks and voids and reduces density in blow molding and injection molding processes. With reduced density and surface voids, it caters to the printing and packaging market for non-food consumer packaging applications.

KAFRIT FM 09570 LD is an endothermic foaming agent. This product is used to eliminate sink marks and voids and reduce density in polyethylene (PE) and resin-based materials. Its features include reduced density and reduced surface voids. It's commonly applied in the printing and packaging market for non-food consumer packaging.

POLYFIL P functions as a foaming agent, generating microcells to reduce weight in fibers and nonwovens. It's a versatile solution suitable for PE, PP, and PS. It's compatible with a range of polymers and resins, including high-density polyethylene (HDPE), polystyrenes (PS), polypropylenes (PP), low-density polyethylene (LDPE), and linear low-density polyethylene (LLDPE). It accommodates processing methods like blow molding and injection molding. The carrier is low-density polyethylene (LDPE) within a resin-based matrix. Notable features include its contribution to lightness.

Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.

Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.

Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.

Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.

Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.

Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.

Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.

Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.

Foamazol™ 92 is intended for applications where lower processing temperatures are used that require uniform cell structure with good density reduction.

MASTERFRAN® FM 56001 A is a TPE compund for caps and closures. It is designed specific materials for the cork industry: specifically, closures for wine, spirits and spirits. Our materials are easy to print, colorable, recyclable, phthalate free.

Foamazol™ 60 is recommended for applications where relatively high temperatures are used in the range of 205-275° C (401-527° F).

Foamazol™ 50 is recommended for applications where a relatively fine cell structure is required at processing temperatures about 175-230° C (347-446° F)

Foamazol™ 91 is intended for applications where lower processing temperatures are used that require uniform cell structure with good density reduction.

Foamazol™ 95 is intended for applications in polystyrene or polystyrene-type materials. It can be used in injection molding and extrusion processes to produce very fine celled foams.

Foamazol™ 73S is For use in injection molding and extrusion applications where very fine and uniform cells are required. Especially recommended for nucleation of direct gassed polystyrene foams.

New Particle Chemical Colors Corp. 7300 FOAMING PLASTIC MASTERBATCH is a most widely used Nitrogen foaming Masterbatch For Foamed Plastics. Foaming plastic masterbatch 7300 is particularly adapted for use in unicellular products where low gas loss be diffusion is required since it blows by releasing nitrogen.It is non-odorous in itself and imparts no odor to the finished products for which it is used and may be used in white or light colored compounds without the objectionable discoloration and staining obtained with many organic chemicals although it is a yellow pellet, the decomposition residue by heat is white. 7300 is broadly used blowing agent for most polymers processing, and should not be used with beryllium or copper tooling in injection molding structural foam.

Cel-Span® CFA 899 is a 40% active endothermic foaming agent concentrate recommended for extrusion applications for a variety of thermoplastic resins such as polyethylene, polypropylene, styrene, MPPO, and ABS. Cel-Span® CFA 899 is recommended for extrusion, and structural foam molding of applications that require a very fine cell structure compared to a typical endothermic foaming agent in esthetic applications.

Cell.Mix A072/15 is a chemical blowing agent masterbatch used against shrinking/warpage of compact parts.