Products in Other Building & Construction Applications: Chemical Re...

ChemSystems Helix Epoxy Primer is a two component, water-based epoxy primer designed as an adhesion promoter between Helix polymer coatings, cement based overlays, and hard surface substrates. Helix Epoxy Primer acts as a thin build primer, at the same time penetrating the surface of the substrate to provide excellent adhesion.

ChemSystems Silane 40 SB VX is a solvent-based, breathable, deep-penetrating, water repellent for concrete, masonry, and block. It protects by eliminating water intrusion which keeps harmful chemicals like deicing salts from entering the slab. Keeping water from entering the material also reduces issues related to freeze/thaw cycles and keeps rebar rust free.

HercuLean HercuLean™ H140 19mm can be used as a stand-alone structural foam or as a core material for laminates to provide high-strength structure in a variety of applications. Nomaco has the capability to provide extruded profiles, planks, and sheet stock in multiple thicknesses and densities, designed to performance specifications required. Nomaco can produce large, one-piece sheet stock with fabrication equipment for cut-to-size needs, providing our customers with a vast scope of design possibilities.

Microcare VDX Dry Lubricant Spray is a medical-grade Polytetrafluoroethylene (PTFE) micro dispersion lubricant. This spray-applied lubricant dispenses in a precise spray pattern ideal for spot lubrication of springs, hinges, and mechanical pinch points in medical device assemblies. VDX provides a low cost, non-migrating inert coating that imparts ultra-low friction surfaces and eliminates sticking problems common in low-speed, light-load mechanical assemblies.

Armor Plate 999 High-Strength Epoxy Grout is a high strength, thermosetting, epoxy grout system. AP 999 is a packaged, premeasured, three-component system of epoxy resin, epoxy catalyst, and inert aggregate. This laboratory tested mixture produces a foundation grout with homogenous aggregate distribution. The rapid high strength and chemical resistance of the AP 999 grout provides an equipment foundation which is long-lasting, economical and maintenance free. Because of its quick cure time, AP 999 is excellent for areas where equipment must be placed in service with a short downtime. It has been used to grout all the equipment at the Prudhoe Bay, Alaska, North Slope Operations. AP 999 is used to pace equipment such as compressors, pumps, centrifuges, turbines, generators, kilns, steam engines diesel engines, milling machines, blowers and presses.

HercuLean HercuLean™ H140 25mm can be used as a stand-alone structural foam or as a core material for laminates to provide high-strength structure in a variety of applications. Nomaco has the capability to provide extruded profiles, planks, and sheet stock in multiple thicknesses and densities, designed to performance specifications required. Nomaco can produce large, one-piece sheet stock with fabrication equipment for cut-to-size needs, providing our customers with a vast scope of design possibilities.

Crown Foam Technologies Medium Density Vinyl Foam 10#-14# is the perfect solution for the more challenging environment that partners flexibility and wear-resistance. CVM114 is available in duel density, multi layered colored logs.

ACCU-GROUT products are three-component, pre-proportioned, industrial grade epoxy grouting systems. ACCU-GROUT LE is a low exotherm, high strength construction epoxy. The recommended application temperature range for the grout products is between 60°F - 95°F (16°C - 35°C).

Midwest Industrial Products Corporation Deep Mix Grout 141 is a 100% solids 3 component epoxy mortar that has a very high loading of super hard, dense Aggregates. It is extremely strong and can stand up to grinding steel wheel traffic and brutal impact. It has outstanding chemical resistance and can be used in highly corrosive areas.

Minchem VE60 is a high-performance vinyl ester-based acid-resistant material designed to provide maximum resistance to aggressive chemical environments. It is typically provided in a two-component format comprising, a vinyl ester solution and a catalyzed filler powder, which can be altered, with varying granulometry to suit the required thickness and application.

Onyx Concrete Coatings Polyurethane WB Matte is a two-component, low-VOC premium aliphatic water-based polyurethane. This latest generation polyurethane system provides excellent UV resistance with a matte finish and no solvent odor. This system boasts easy installation, long pot life, as well as great abrasion and chemical resistance and is suitable for both indoor and outdoor uses. Polyurethane WB is also available in a gloss finish.

Xtrabond 150 is a one component, permanently flexible, RTV (Room Temperature Vulcanizing) mildew-resistant silicone sealant that is the industry standard. The product’s tough chemical resistance makes it a worry-free solution for a wide range of applications.

DurProx® Physically Crosslinked Polyethylene Foamcan be produced with advanced technology, have superior mechanical properties and an advanced dimensional stability. The product is extruded with the help of additives and lastener's which is followed by the electron beam process. After the electron beam process with hot oven operation the physical characteristic of the product increases by means of dilatation, and a product with a very closed-cell structure and a smooth surface is obtained. It can be produced for different sectors in cut plate, roll, tube, extra-laminated or non-laminated forms.

SCIGRIP® SG230HV is a two-component, 10:1 mix ratio product for bonding composite and other plastic parts with little to no surface preparation1,2. The adhesive is designed to work with a selection of activators to provide a wide range of working times from 30 to 120 minutes. SG230 HV is mostly used in marine, transportation and construction applications. It is especially suited for bonding large structural parts requiring long working times and for filling deep irregular gaps up to 1.5 inches (39 mm). SG230 HV is available in 490 ml cartridges and 5 and 50 gallon (19 and 189 liters) in bulk containers for application with meter-mix dispense equipment. The combination of SG230 HV A with SG220 B activator is recommended only for use above 85°F (29°C) ambient temperature.

Minchem Epitek Mortar is a high-performance epoxy-based acid and abrasion-resistant material designed to provide chemical resistance to aggressive chemical environments. They are typically provided in a two-component format comprising, an epoxy solution and an epoxy-based hardener, with the option of an inert filler powder with varying granulometry to suit the required thickness and application.

ASTC 1007 Polyurea Spray is a two component 100% solids, rapid set high performance polyurea fast set spray elastomer coating formulated for high physical properties, hydrolytic stability, and low permeability. Maximum Vessel Heat Exposure 3, Non-pressurized, "avoid "cold wall.

SCIGRIP® SG7706 is a two-part methacrylate, structural rodding and clip bonding adhesive designed for the structural bonding of sink clips, steel and fiberglass rodding materials, and steel and aluminum to solid surface (acrylic and polyester), engineered stone, quartz surfaces, and natural stone products. Combined at a ratio of 1:1, SG7706 has a working time of 4 to 8 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. SG7706 provides high strength bonds to acrylic solid surface, polyester solid surface (both filled and unfilled), and solid surface (combinations of both acrylic and polyester solid surface resins) and the steel clips, rods, fiberglass and other materials. SG7706 has high strength bonds to carbon steel, stainless steel, and aluminum alloys. SG7706 is not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops. However, this yellowing will not affect bond performance, but will affect bond appearance. SG7706 is available in 50 ml and 400 ml cartridges.

Arabian Chemical Industries ISOBOND Xtra is a liquid latex admixture formulated to enhance properties of cementitious system. Mortars modified withISOBOND Xtra gives better adhesion, water and chemical resistance, high mechanical strength and shock resistance. It is resistant to hydrolysis and suitable for internal or external applications.

ACCU-GROUT products are three-component, pre-proportioned, industrial grade epoxy grouting systems. ACCU-GROUT HD is a high strength construction epoxy. The recommended application temperature range for the grout products is between 60°F - 95°F (16°C - 35°C).

Coating & Binding Technology EMG‐19 / 3K Epoxy Grout is a two component, 100% solids, solvent‐free system formulated to provide high‐strength and superior creep resistance combined with the highest effective bearing area. EMG‐19/3K is often used to replace steel soleplates or rails and is used as an epoxy foundation capping material that is resistant to high operating temperatures. Coating & Binding Technology's Epoxy Machine Grout is a low exothermic epoxy system for machinery grouting.

Cling Foam® C800 Cling Foam offers a choice of materials depending upon the requirements of the application. The C800 Series is low density closed-cell Polyvinyl Chloride foam with the unique ability to bond to non-porous surfaces without an adhesive.It comes on a special "high gloss" paper to protect the cling surface. "Cling Foam " leaves no residue when removed. C810 is the same low density product; coated on the opposite laminating side with a pressure-sensitive adhesive.

HercuLean HercuLean™ H220 14mm can be used as a stand-alone structural foam or as a core material for laminates to provide high-strength structure in a variety of applications. Nomaco has the capability to provide extruded profiles, planks, and sheet stock in multiple thicknesses and densities, designed to performance specifications required. Nomaco can produce large, one-piece sheet stock with fabrication equipment for cut-to-size needs, providing our customers with a vast scope of design possibilities.

HercuLean HercuLean™ H140 14mm can be used as a stand-alone structural foam or as a core material for laminates to provide high-strength structure in a variety of applications. Nomaco has the capability to provide extruded profiles, planks, and sheet stock in multiple thicknesses and densities, designed to performance specifications required. Nomaco can produce large, one-piece sheet stock with fabrication equipment for cut-to-size needs, providing our customers with a vast scope of design possibilities.

ADH 1200 is a two component, 100% solids urethane adhesive designed for bonding urethane foam or PE foam to each other or to concrete when used in conjunction with PRI 1050. With good flexibility and excellent resistance to most chemicals and water ADH1200 is ideal for water park and dry play articles.

Onyx Concrete Coatings High Clear Epoxy Fast is a two component, high performance cycloaliphatic 100% solids clear epoxy which provides a durable, high gloss finish which beautifies concrete for years. The epoxy chemistry provides excellent bonding characteristics and its low viscosity allows deep penetrating into a concrete substrate. It can be used as a clear top coat, for chip floors or as the resin of choice when applying color quartz. High Clear Fast Epoxy cures in four hours at 70°F (About half the time of most conventional epoxy systems).

Decoplast® Acryl DP 600 is an acrylic polymer emulsion which enhances the adhesion, workability, physical properties such as compressive and flexural strength, and durability of Portland cement mortars, plaster, stucco, and concrete mixes.

Arabian Chemical Industries ISOBOND is a liquid latex admixture based on styrene butadiene rubber that is designed as an integral adhesivefor cementitious system. Mortars and concrete prepared from ISOBOND has excellent adhesion properties, chemical resistant, high strength, and waterproof. It has excellent resistance to hydrolysis (unlike PVA-based bonding system) and will perform very well under humid conditions and other applications subject to continuous and/ or alternate wettingand drying.

Onyx Concrete Coatings Polyaspartic 90 is a two component, high solids, aliphatic polyaspartic finish floor coating, formulated to give the highest solids content with the lowest viscosity 90% solids and 0-V.O.C. Polyaspartic 90 provides a high gloss finish and is the product of choice for a high build interior/ exterior top coat. It is designed to be applied at 5-20 mils (DFT), for durability, stain resistance, and a finish coat which beautifies concrete for years simply unmatched. It is also formulated to be used with virtually all other Onyx base systems.

Minchem NE60 is high-performance epoxy-based acid-resistant material designed to provide maximum resistance to aggressive chemical environments. It is typically provided in a two-component format comprising, an epoxy solution and an epoxy-based hardener, with the option of an inert filler powder with varying granulometry to suit the required thickness and application.

Krete100® is an admixture to the concrete mixes to provide highest structural density of the matrix of cement rock with thickness of cementitious coatings from 8 mm to 35 mm or from 1/3” to 1 ¼”. Krete100® admixture is a development of KALMATRON® KF-A with enforced ability to hydrate cement with minimal amount of water. As it shown on “1”, the mesh size of OPC Krete100 is at 6 µmm to 9 µmm with lowest exothermic emission.

SCIGRIP® SG7706 B is a two-part methacrylate, structural rodding and clip bonding adhesive designed for the structural bonding of sink clips, steel and fiberglass rodding materials, and steel and aluminum to solid surface (acrylic and polyester), engineered stone, quartz surfaces, and natural stone products. Combined at a ratio of 1:1, SG7706 has a working time of 4 to 8 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. SG7706 provides high strength bonds to acrylic solid surface, polyester solid surface (both filled and unfilled), and solid surface (combinations of both acrylic and polyester solid surface resins) and the steel clips, rods, fiberglass and other materials. SG7706 has high strength bonds to carbon steel, stainless steel, and aluminum alloys. SG7706 is not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops. However, this yellowing will not affect bond performance, but will affect bond appearance. SG7706 is available in 50 ml and 400 ml cartridges.

QuiKBond™ is a water-based, non-asbestos, polymer modified asphalt emulsion adhesive for bonding approved roofing and waterproofing insulations.

Crown Foam Technologies Flame Vexator PVC Foam is a multi-purpose foam for applications that require measurable flame resistance. PVC foams are inherently resistant to a wide range of chemicals, UV rays and has moderate flame resistance. It seals out air & moisture.

Hernon Fusionbond® 378 is a non-sag two component methacrylate adhesive. Fusionbond® 378 is an excellent choice for composite bonding applications in the marine, automotive and construction industries because it requires virtually no surface preparation. Fusionbond® 378 provides superior toughness at temperatures from -40 to 250°F.

ASTC 1006 Polyurea Spray is a two component, high wet-out, long open time, aromatic MDI or TDI prepolymer and multifunctional polyurea amine blend. The polymer system is "pure polyurea" and is not modified using urethane or other additives.

Coating & Binding Technology EMG‐17 / 3K Epoxy Grout is a three component, 100% solids, solvent‐free system formulated to provide high‐strength and superior creep resistance combined with the highest effective bearing area. EMG‐17 provides precise alignment, high impact resistance and oil and chemical resistance to dynamic load equipment foundation applications.