Products in Building & Construction: Chemical Resistant

RTU Adhesive B is a two-component, addition-curing silicone composition curing to a soft silicone adhesive.

RTU Foam is a polyethylene foam material that is expanded in heat oven after extruded with the help of chemical inflators and cross linking agents that are put inside. It has advanced chemical and mechanical features thanks to its cross-linked structure Compared to DurProx (physically Cross-Linked Polyethylene Foam) the cell structure is larger and the surface is not as smooth. It can be used in many areas that sound, heat, humidity insulation and shock protection is intended. It can be produced for different sectors as cut plate, roll, tube, extra-laminated or non-laminated.

SILRES® BS 30 is a solventless silicone concentrate based on a mixture of silane and siloxane. In its undiluted form, it provides water and stain repellency to mineral substrates while enhancing their appearance. SILRES® BS 30 is suitable for a wide variety of mineral substrates used in the tile industry, including tumbled marble, limestone, slate, and saltillo clay tile.

SILRES® BS 1803 is a solvent-free emulsion based on organo-modified silanes and siloxanes. It is specifically designed to act as a water-repellent admixture for semi-dry concrete and other non-load-bearing cement-based building materials, including paving stones and concrete blocks. SILRES® BS 1803 helps to minimize the amount of water absorbed by the concrete or other cement-based materials, thereby enhancing their durability and resistance to moisture-related issues.

SILRES® BS 1803 A is a stable and VOC-compliant silicone emulsion with a 60% active content. It is specifically designed to reduce water uptake and create visual beading on concrete substrates while allowing the pores and capillaries to remain unblocked. This product is particularly effective when it comes to preventing water uptake and promoting beads, even at very low addition levels. One of the main applications of SILRES® BS 1803 A is as an admixture for non-load bearing cement-based formulated products, including precast products, blocks, and pavers. By incorporating this emulsion into the formulation, the resulting products gain enhanced waterproofing properties and resistance to water penetration. Furthermore, SILRES® BS 1803 A can also be used as a topical sealer for post-treatment of cement-based formulated products.

SILPURAN® 2122 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive with high adhesive strength. It belongs to the silicone gel category. SILPURAN® 2122 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.

SILPURAN® 2114 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive with high adhesive strength. It belongs to the silicone gel category. SILPURAN® 2114 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.

SILPURAN® 2100 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive. It belongs to the silicone gel category. SILPURAN® 2100 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.

SILPURAN® 2112 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive. It belongs to the silicone gel category. SILPURAN® 2112 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.

SILPURAN® 2130 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive. It belongs to the silicone gel category. SILPURAN® 2130 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.

SILPURAN® 2117 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive. It belongs to the silicone gel category. SILPURAN® 2117 A/B can be used as a skin adhesive in medical applications. It is especially suitable for bonding external mammary prostheses to the patient’s skin.

GENIOSIL® GF 9 is an organofunctional silane with various applications. It is commonly used in building & construction adhesives, Flooring installation, Industrial adhesives, Interior paints & coatings, and waterproofing membranes. GENIOSIL® GF 9 is particularly effective in glass-fiber reinforced or mineral-filled polymers as well as a surface modifier.

ARCOR® EE-96 is a solvent-free, two-component rebuilding compound specifically formulated to provide high wear and abrasion resistance. It serves as an ideal rebuilding and repair material for metals that have been damaged by corrosion, erosion, abrasion, or cavitation. With its exceptional durability, ARCOR® EE-96 is particularly well-suited for high-wear flooring applications in aggressive wear and impact zones, offering a reliable non-skid surface. This non-sagging compound maintains its integrity up to 200 mils without shrinking during the curing process. It exhibits excellent adhesion to both metal and concrete surfaces, ensuring a robust bond. As a Novolac Epoxy, ARCOR® EE-96 demonstrates excellent resistance in a wide range of chemical environments and can withstand heat up to 450ºF. Choose ARCOR® EE-96 for a dependable rebuilding compound that provides exceptional wear resistance, protects against corrosion and erosion, and maintains structural integrity in demanding environments. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® Spraythane FL is a high elongation, elastomeric, hybridized epoxy/urethane coating. It offers exceptional resilience, tear resistance, and impact resistance, making it an excellent choice for combatting cavitation and abrasion. This versatile coating is fully compatible with epoxy coatings. The urethane aspect of ARCOR® Spraythane FL delivers a tough and flexible resilience, while the epoxy aspect provides improved water and chemical resistance, as well as shelf stability. Notably, the epoxy reactivity of this product eliminates the moisture sensitivity and toxicity commonly associated with traditional urethanes. ARCOR® Spraythane FL is a reliable and durable solution for a wide range of coating applications. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® Spraythane is a high elongation, elastomeric, hybridized epoxy/urethane coating. It offers exceptional resilience, tear resistance, and impact resistance, making it an excellent choice for combating cavitation and abrasion. This versatile coating is fully compatible with epoxy coatings. The combination of epoxy and urethane in ARCOR® Spraythane provides a durable and flexible resilience, along with improved water and chemical resistance. It also boasts excellent shelf stability. Unlike traditional urethanes, ARCOR® Spraythane's epoxy reactivity eliminates moisture sensitivity and toxicity concerns. This coating delivers a smooth finish and effortlessly self-levels in horizontal applications. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

CP-1007™ is a non-flammable, non-toxic, non-acid, penetrating silicate sealer that strengthens and internally waterproofs cementious materials. CP-1007 is water-based and environmentally friendly. Unlike membrane forming sealers which can be worn away in high traffic areas’, leaving unprotected concrete unsightly and susceptible to chemical attack, CP-1007 penetrates into the surface and cannot be scratched or peeled off. When applied to concrete or masonry, CP-1007 reacts with calcium hydroxide and reduces porosity and permeability of the concrete matrix. This serves to increase the hardness and chemical resistance which, in turn, increases the service life of the surface. In conditions where salt air and humidity attack the concrete, causing oxidation of the reinforcing steel, CP-1007 has proved to halt such corrosion activity. When the CP-1007 is applied to concrete exposed to such conditions, exfoliation or expulsion of the chlorides takes place. The CP-1007 reacts with free alkali in the concrete forming a silica hydrogel that fills the capillaries within the matrix. This hydrogel waterproofs and seals the surface after all materials harmful to the concrete are removed. This process could take up to thirty days or longer, depending on the chloride and acidic residual concentration within the capillaries.

Turbo Fuse 16 HS green wicking grade threadlocker is a fast curing, Green, medium strength, wicking grade, anaerobic thread-locking compound for bonding and sealing threads, and pre-assembled parts. This threadlocker is highly resistant to heat, vibrations, water, gasses, oils, hydrocarbons and many chemicals.

BD590 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD590 has a working time of 70 to 100 minutes and achieves nearly 90 percent of its ultimate strength in 180 to 240 minutes at room temperature curing. BD590 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD590 bonds very strongly to steel, stainless steel, and aluminum metals. BD590 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD300 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD300 has a working time of 3 to 6 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. BD300 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD300 bonds very strongly to steel, stainless steel, and aluminum metals. BD300 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BF420FX is a two-part methacrylate, flexibilized, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BF420FX has a working time of 3 to 7 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. BF420FX provides high strength and very flexible bonds to the above reference surfaces with generally no preparation effort. BF420FX bonds very strongly to steel, stainless steel, and aluminum metals and will allow a great deal of movement of the substrates due to cte (coefficient of thermal expansion) differences. BF420FX adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD425FX is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD425FX has a working time of 25 to 35 minutes and achieves nearly 90 percent of its ultimate strength in 50 to 80 minutes at room temperature curing. BD425FX provides high strength bonds to the above reference surfaces with generally no preparation effort. BD425FX bonds very strongly to steel, stainless steel, and aluminum metals. BD425FX adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD320FX is a two-part methacrylate, flexibilized, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD320FX has a working time of 8 to 12 minutes and achieves nearly 90 percent of its ultimate strength in 18 to 25 minutes at room temperature curing. BD320FX provides high strength and very flexible bonds to the above reference surfaces with generally no preparation effort. BD320FX bonds very strongly to steel, stainless steel, and aluminum metals and will allow a great deal of movement of the substrates due to coefficient of thermal expansion differences. BD320FX adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD350 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD350 has a working time of 25 to 45 minutes and achieves nearly 90 percent of its ultimate strength in 60 to 90 minutes at room temperature curing. BD350 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD350 bonds very strongly to steel, stainless steel, and aluminum metals. BD350 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

RodLock® is a two-part non sag methacrylate, structural bonding adhesive designed for the structural bonding of steel and fiberglass rods into natural stone, granite, marble and porcelain counter top products. Combined at a ratio of 1:1, RodLock has a working time of 4 to 8 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. RodLock provides high strength bonds to the above reference surfaces with generally no preparation effort. RodLock bonds very strongly to steel, stainless steel, and aluminum metals. RodLock adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance. Due to its high strength, keep groove widths and depths to a minimum, as wide and deep grooves may cause RodLock to crack the granite upon reacting and shrinking. We are not liable for cracked counter tops due to this effect.

BD305 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD305 has a working time of 2 to 4 minutes and achieves nearly 90 percent of its ultimate strength in 8 to 10 minutes at room temperature curing. BD305 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD305 bonds very strongly to steel, stainless steel, and aluminum metals. BD305 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD54750 is a low viscosity polyamine epoxy product. The BD54750 is designed for metals and plastics bonding. This product is ideal for highway and bridge deck repairs, potting, casting, and encapsulation, floor systems, linings of tanks and pipes, and coatings. This product has good chemical, corrosion, and water resistance. It is especially formulated for a 1:1 mix ratio for use in side by side cartridges, or to be used by hand mixing, or use with meter mix equipment. A handling cure is normally achieved at room temperature within 4 hours with a full cure at room temperature within 48 hours. To accelerate the final cure, or to quicken the handling simply elevate the temperature.

ClipLock® is a two-part non sag methacrylate, structural bonding adhesive designed for the structural bonding of rotolocs, grommets, dishwasher mounts, sink clips into natural stone, granite, marble and porcelain counter top products. Combined at a ratio of 1:1, ClipLock has a working time of 4 to 8 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. ClipLock provides high strength bonds to the above reference surfaces with generally no preparation effort. ClipLock bonds very strongly to steel, stainless steel, and aluminum metals. ClipLock adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance. Due to its high strength, keep groove widths and depths to a minimum, as wide and deep grooves may cause ClipLock to crack the granite upon reacting and shrinking. We are not liable for cracked counter tops due to this effect.

BD1020 is a two-part methacrylate, flexibilized, super toughened, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD1020 has a working time of 3 to 7 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. BD1020 provides high strength, superior impact strength, and very flexible bonds to the above reference surfaces with generally no preparation effort. BD1020 bonds very strongly to steel, stainless steel, and aluminum metals and will allow a great deal of movement of the substrates due to CTE (coefficient of thermal expansion) differences. BD1020 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD422FX is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD422FX has a working time of 18 to 24 minutes and achieves nearly 90 percent of its ultimate strength in 35 to 50 minutes at room temperature curing. BD422FX provides high strength and very flexible bonds to the above reference surfaces with generally no preparation effort. BD422FX bonds very strongly to steel, stainless steel, and aluminum metals and will allow a great deal of movement of the substrates due to coefficient of thermal expansion differences. BD422FX adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD2045 is a two-part methacrylate, flexibilized, super toughened, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD2045 has a working time of 40 to 60 minutes and achieves nearly 90 percent of its ultimate strength in 80 to 100 minutes at room temperature curing. BD2045 provides high strength, superior impact resistance, and very flexible bonds to the above reference surfaces with generally no preparation effort. BD2045 bonds very strongly to steel, stainless steel, and aluminum metals. BD2045 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD560 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD560 has a working time of 50 to 65 minutes and achieves nearly 90 percent of its ultimate strength in 140 to 180 minutes at room temperature curing. BD560 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD560 bonds very strongly to steel, stainless steel, and aluminum metals. BD560 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD330 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD330 has a working time of 18 to 32 minutes and achieves nearly 90 percent of its ultimate strength in 45 to 70 minutes at room temperature curing. BD330 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD330 bonds very strongly to steel, stainless steel, and aluminum metals. BD330 adhesives are not be used to create imperceptible seams in countertops or for seaming countertops.

BD550 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD550 has a working time of 40 to 60 minutes and achieves nearly 90 percent of its ultimate strength in 100 to 120 minutes at room temperature curing. BD550 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD550 bonds very strongly to steel, stainless steel, and aluminum metals. BD550 adhesives are highly pigmented white and have UV stabilizers in them, however BD550 must not be used to create imperceptible seams in countertops or for seaming countertops.

BD530 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD530 has a working time of 25 to 40 minutes and achieves nearly 90 percent of its ultimate strength in 90 to 150 minutes at room temperature curing. BD530 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD530 bonds very strongly to steel, stainless steel, and aluminum metals. BD530 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD310 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD310 has a working time of 8 to 12 minutes and achieves nearly 90 percent of its ultimate strength in 18 to 25 minutes at room temperature curing. BD310 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD310 bonds very strongly to steel, stainless steel, and aluminum metals. BD310 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD2025 is a two-part methacrylate, flexibilized, super toughened, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD2025 has a working time of 25 to 35 minutes and achieves nearly 90 percent of its ultimate strength in 50 to 80 minutes at room temperature curing. BD2025 provides high strength, superior impact resistance, and very flexible bonds to the above reference surfaces with generally no preparation effort. BD2025 bonds very strongly to steel, stainless steel, and aluminum metals. BD2025 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.