Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts

Big Dog Adhesives BD54750 Epoxy Adhesive

BD54750 is a low viscosity polyamine epoxy product. The BD54750 is designed for metals and plastics bonding. This product is ideal for highway and bridge deck repairs, potting, casting, and encapsulation, floor systems, linings of tanks and pipes, and coatings. This product has good chemical, corrosion, and water resistance. It is especially formulated for a 1:1 mix ratio for use in side by side cartridges, or to be used by hand mixing, or use with meter mix equipment. A handling cure is normally achieved at room temperature within 4 hours with a full cure at room temperature within 48 hours. To accelerate the final cure, or to quicken the handling simply elevate the temperature.

Product Type: Epoxy Adhesive, Potting Compound

Application Area: Pipe Liners

Compatible Substrates & Surfaces: Metal, Plastics

Cure Method: Air Dry

Chemical Family: Epoxy & Epoxy Derivatives

Technical Data SheetSafety Data Sheet

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Chemical Family
Epoxy & Epoxy Derivatives
Product Type
Epoxy Adhesive,
Potting Compound
Technologies
Ready-to-Use Products
Product Families
Ready-to-Use Products — Adhesives & Sealants
Structural Adhesives

Features & Benefits

Ready-to-Use Product Features
Chemical Resistant,
Corrosion Resistant,
Low Viscosity,
Water Resistant

Applications & Uses

Markets
Building & Construction
Applications
Building & Construction — Building Materials
Fence, Decks & Rails,
Pipes & Plumbing
Building & Construction — Flooring & Surfaces
Fillers, Levellers & Joints
Building & Construction — Infrastructure, Roads & Paving
Pavement, Highways, Roads & Bridges
Application Area
Pipe Liners
Compatible Substrates & Surfaces
Metal,
Plastics
Cure Method
Air Dry

Properties

Component A
ValueUnitsTest Method / Conditions
Viscosity12000cps-
Component B
ValueUnitsTest Method / Conditions
Viscosity12000cps-
Cured Properties
ValueUnitsTest Method / Conditions
Working Time (at 75°F/ 24°C)120minutes-
Fixture Time (at 75°F/ 24°C)4hours-
Full Cure (at Room Temperature, For Full Properties)48hours-
Operating Temperature-60 to 302 (-76 to 150)°F (°C)-
Density (at Room Temperature, Mixed)9.5 (1.15)lbs/gal (g/cc)-
Flash Point (at Room Temperature)min. 392 (min. 200)°F (°C)-
Mix Ratio (Part A:Part B)1:1--
Heat Distortion Temperature150 (66)°F (°C)-
Hardness (at Room Temperature)82-Shore D
Flex Strength (at Room Temperature, Ultimate)11100psi-
Compression Strength (at Room Temperature, Ultimate)17000psi-
Compression Strength (at Room Temperature, Yield)9600psi-
Tensile Strength (at Room Temperature)7500psi-
Elongation (at Room Temperature)7.5%-
Impact Resistance (at Room Temperature)min. 150inch/lb-
Dielectric Constant (at 25°C, 100Hz)3.5--
Dielectric Strength (at Room Temperature)440v/mil-
Volume Resistivity (at Room Temperature)8 x 10¹⁴ohm-cm-
Water Absorption (for 24 hours)max. 0.25%-
Volatile Organic Compounds (at Room Temperature)0% by weight-

Regulatory & Compliance

Certifications & Compliance
ISO 9001
Chemical Inventories
DSL (Canada),
TSCA (USA)

Storage & Handling

Shelf Life
12 Months
Storage & Handling
  • Bring both components to room temperature prior to mixing. Mix 1 part A to 1 part B by volume or 55 grams part A to 45 grams part B by weight thoroughly for several minutes.
  • Dispense mixed material over properly positioned devices to be glued together.
  • Parts may be shipped within 48 hours but parts can be moved in 4 hours.