Products

BD54750 is a low viscosity polyamine epoxy product. The BD54750 is designed for metals and plastics bonding. This product is ideal for highway and bridge deck repairs, potting, casting, and encapsulation, floor systems, linings of tanks and pipes, and coatings. This product has good chemical, corrosion, and water resistance. It is especially formulated for a 1:1 mix ratio for use in side by side cartridges, or to be used by hand mixing, or use with meter mix equipment. A handling cure is normally achieved at room temperature within 4 hours with a full cure at room temperature within 48 hours. To accelerate the final cure, or to quicken the handling simply elevate the temperature.

BD590 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD590 has a working time of 70 to 100 minutes and achieves nearly 90 percent of its ultimate strength in 180 to 240 minutes at room temperature curing. BD590 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD590 bonds very strongly to steel, stainless steel, and aluminum metals. BD590 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BDSI 5000 is a surface insensitive cyanoacrylate adhesive used in applications that require faster cure speeds, on parts that are dry, and on parts that are acid base. The SI series bonds a wide range of similar and dissimilar surfaces. The SI Series provides excellent performance in a wide range of applications.

BDSI 1000 is a surface insensitive cyanoacrylate adhesive used in applications that require faster cure speeds, on parts that are dry, and on parts that are acid base. The SI series bonds a wide range of similar and dissimilar surfaces. The SI Series provides excellent performance in a wide range of applications.

BDSI 2000 is a surface insensitive cyanoacrylate adhesive used in applications that require faster cure speeds, on parts that are dry, and on parts that are acid base. The SI series bonds a wide range of similar and dissimilar surfaces. The SI Series provides excellent performance in a wide range of applications.

BD300 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD300 has a working time of 3 to 6 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. BD300 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD300 bonds very strongly to steel, stainless steel, and aluminum metals. BD300 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

RodLock® is a two-part non sag methacrylate, structural bonding adhesive designed for the structural bonding of steel and fiberglass rods into natural stone, granite, marble and porcelain counter top products. Combined at a ratio of 1:1, RodLock has a working time of 4 to 8 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. RodLock provides high strength bonds to the above reference surfaces with generally no preparation effort. RodLock bonds very strongly to steel, stainless steel, and aluminum metals. RodLock adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance. Due to its high strength, keep groove widths and depths to a minimum, as wide and deep grooves may cause RodLock to crack the granite upon reacting and shrinking. We are not liable for cracked counter tops due to this effect.

SeamLock Pro is a two-part methacrylate, dripless seaming adhesive designed for the inconspicuous bonding of various substrates, including solid surface (acrylic, polyester and blended products), granite, engineered stone, quartz, marble, cultured marble, glass, sintered stone, porcelain, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, SeamLock Pro has a working time of 8 to 12 minutes and achieves nearly 90 percent of its ultimate strength in 20 to 25 minutes at room temperature curing. SeamLock Pro provides high strength bonds to the above reference surfaces with generally no preparation effort. SeamLock Pro adhesives are UV stable, and will not yellow over time.

BDRP 500 is a medium viscosity, rapid curing, cyanoacrylate adhesive. It is designed to bond a wide variety of similar and dissimilar materials. The handling strength in most applications is in the 5 to 10 seconds time period.

BD425FX is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD425FX has a working time of 25 to 35 minutes and achieves nearly 90 percent of its ultimate strength in 50 to 80 minutes at room temperature curing. BD425FX provides high strength bonds to the above reference surfaces with generally no preparation effort. BD425FX bonds very strongly to steel, stainless steel, and aluminum metals. BD425FX adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BF420FX is a two-part methacrylate, flexibilized, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BF420FX has a working time of 3 to 7 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. BF420FX provides high strength and very flexible bonds to the above reference surfaces with generally no preparation effort. BF420FX bonds very strongly to steel, stainless steel, and aluminum metals and will allow a great deal of movement of the substrates due to cte (coefficient of thermal expansion) differences. BF420FX adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD320FX is a two-part methacrylate, flexibilized, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD320FX has a working time of 8 to 12 minutes and achieves nearly 90 percent of its ultimate strength in 18 to 25 minutes at room temperature curing. BD320FX provides high strength and very flexible bonds to the above reference surfaces with generally no preparation effort. BD320FX bonds very strongly to steel, stainless steel, and aluminum metals and will allow a great deal of movement of the substrates due to coefficient of thermal expansion differences. BD320FX adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BDRP 100 is a medium viscosity, rapid curing, cyanoacrylate adhesive. It is designed to bond a wide variety of similar and dissimilar materials. The handling strength in most applications is in the 5 to 10 seconds time period. This product can be post applied.

BDSI 500 is a surface insensitive cyanoacrylate adhesive used in applications that require faster cure speeds, on parts that are dry, and on parts that are acid base. The SI series bonds a wide range of similar and dissimilar surfaces. The SI Series provides excellent performance in a wide range of applications.

BDRP 1000 is a high viscosity, rapid curing, cyanoacrylate adhesive. It is designed to bond a wide variety of similar and dissimilar materials. The handling strength in most applications is in the 5 to 10 seconds time period.

BDRP 30 is a low viscosity, rapid curing, cyanoacrylate adhesive. It is designed to bond a wide variety of similar and dissimilar materials. The handling strength in most applications is in the 5 to 10 seconds time period. This product can be post applied.

BDSI Gel is a surface insensitive cyanoacrylate adhesive used in applications that require faster cure speeds, on parts that are dry, and on parts that are acid base. The SI series bonds a wide range of similar and dissimilar surfaces. The SI Series provides excellent performance in a wide range of applications.

BD350 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD350 has a working time of 25 to 45 minutes and achieves nearly 90 percent of its ultimate strength in 60 to 90 minutes at room temperature curing. BD350 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD350 bonds very strongly to steel, stainless steel, and aluminum metals. BD350 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

SeamLock is a two-part methacrylate, flowable seaming adhesive designed for the inconspicuous bonding of various substrates, including solid surface (acrylic, polyester and blended products), granite, engineered stone, quartz, marble, cultured marble, glass, sintered stone, porcelain, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, SeamLock has a working time of 8 to 12 minutes and achieves nearly 90 percent of its ultimate strength in 20 to 25 minutes at room temperature curing. SeamLock provides high strength bonds to the above reference surfaces with generally no preparation effort. SeamLock adhesives are UV stable, and will not yellow over time.

BDRP Gel is a high viscosity, non-sag, rapid curing, cyanoacrylate adhesive gel. It is designed to bond a wide variety of similar and dissimilar materials. The handling strength in most applications is in the 25 to 30 seconds time period.

BDSI 30 is a surface insensitive cyanoacrylate adhesive used in applications that require faster cure speeds, on parts that are dry, and on parts that are acid base. The SI series bonds a wide range of similar and dissimilar surfaces. The SI Series provides excellent performance in a wide range of applications.

BDRP 2000 is a high viscosity, rapid curing, cyanoacrylate adhesive. It is designed to bond a wide variety of similar and dissimilar materials. The handling strength in most applications is in the 5 to 10 seconds time period.

BD305 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD305 has a working time of 2 to 4 minutes and achieves nearly 90 percent of its ultimate strength in 8 to 10 minutes at room temperature curing. BD305 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD305 bonds very strongly to steel, stainless steel, and aluminum metals. BD305 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD1020 is a two-part methacrylate, flexibilized, super toughened, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD1020 has a working time of 3 to 7 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. BD1020 provides high strength, superior impact strength, and very flexible bonds to the above reference surfaces with generally no preparation effort. BD1020 bonds very strongly to steel, stainless steel, and aluminum metals and will allow a great deal of movement of the substrates due to CTE (coefficient of thermal expansion) differences. BD1020 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BDRP 4000 is a high viscosity, rapid curing, cyanoacrylate adhesive. It is designed to bond a wide variety of similar and dissimilar materials. The handling strength in most applications is in the 15 to 20 seconds time period.

ClipLock® is a two-part non sag methacrylate, structural bonding adhesive designed for the structural bonding of rotolocs, grommets, dishwasher mounts, sink clips into natural stone, granite, marble and porcelain counter top products. Combined at a ratio of 1:1, ClipLock has a working time of 4 to 8 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. ClipLock provides high strength bonds to the above reference surfaces with generally no preparation effort. ClipLock bonds very strongly to steel, stainless steel, and aluminum metals. ClipLock adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance. Due to its high strength, keep groove widths and depths to a minimum, as wide and deep grooves may cause ClipLock to crack the granite upon reacting and shrinking. We are not liable for cracked counter tops due to this effect.

BDSI 3000 is a surface insensitive cyanoacrylate adhesive used in applications that require faster cure speeds, on parts that are dry, and on parts that are acid base. The SI series bonds a wide range of similar and dissimilar surfaces. The SI Series provides excellent performance in a wide range of applications.

BD330 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD330 has a working time of 18 to 32 minutes and achieves nearly 90 percent of its ultimate strength in 45 to 70 minutes at room temperature curing. BD330 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD330 bonds very strongly to steel, stainless steel, and aluminum metals. BD330 adhesives are not be used to create imperceptible seams in countertops or for seaming countertops.

BD422FX is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD422FX has a working time of 18 to 24 minutes and achieves nearly 90 percent of its ultimate strength in 35 to 50 minutes at room temperature curing. BD422FX provides high strength and very flexible bonds to the above reference surfaces with generally no preparation effort. BD422FX bonds very strongly to steel, stainless steel, and aluminum metals and will allow a great deal of movement of the substrates due to coefficient of thermal expansion differences. BD422FX adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BDRP 5000 is a high viscosity, rapid curing, cyanoacrylate adhesive. It is designed to bond a wide variety of similar and dissimilar materials. The handling strength in most applications is in the 5 to 10 seconds time period.

BDRP 3000 is a high viscosity, rapid curing, cyanoacrylate adhesive. It is designed to bond a wide variety of similar and dissimilar materials. The handling strength in most applications is in the 5 to 10 seconds time period.

BD2045 is a two-part methacrylate, flexibilized, super toughened, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD2045 has a working time of 40 to 60 minutes and achieves nearly 90 percent of its ultimate strength in 80 to 100 minutes at room temperature curing. BD2045 provides high strength, superior impact resistance, and very flexible bonds to the above reference surfaces with generally no preparation effort. BD2045 bonds very strongly to steel, stainless steel, and aluminum metals. BD2045 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BDRP 5 is a low viscosity, rapid curing, cyanoacrylate adhesive. It is designed to bond a wide variety of similar and dissimilar materials. The handling strength in most applications is in the 5 to 10 seconds time period. This product can be post applied.

BDRP 50 is a low viscosity, rapid curing, cyanoacrylate adhesive. It is designed to bond a wide variety of similar and dissimilar materials. The handling strength in most applications is in the 5 to 10 seconds time period. This product can be post applied.

BD5405 NS is a two-part, non-sag, room temperature cure, epoxy adhesive designed for high speed bonding of metals, ceramics, and most plastics. It is a thixotropic paste consistency to prevent running and sagging it gives good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It is especially formulated for a 1:1 mix ratio for use in side by side cartridges, or to be used by hand mixing, or use with meter mix equipment. A handling cure is normally achieved at room temperature within 20 – 30 minutes with a full cure at room temperature within 24 hours. To accelerate the final cure, or to quicken the handling simply elevate the temperature.

BD550 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD550 has a working time of 40 to 60 minutes and achieves nearly 90 percent of its ultimate strength in 100 to 120 minutes at room temperature curing. BD550 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD550 bonds very strongly to steel, stainless steel, and aluminum metals. BD550 adhesives are highly pigmented white and have UV stabilizers in them, however BD550 must not be used to create imperceptible seams in countertops or for seaming countertops.