Products in Building Envelope & Roofing: Chemical Resistant

RTU Foam is a polyethylene foam material that is expanded in heat oven after extruded with the help of chemical inflators and cross linking agents that are put inside. It has advanced chemical and mechanical features thanks to its cross-linked structure Compared to DurProx (physically Cross-Linked Polyethylene Foam) the cell structure is larger and the surface is not as smooth. It can be used in many areas that sound, heat, humidity insulation and shock protection is intended. It can be produced for different sectors as cut plate, roll, tube, extra-laminated or non-laminated.

SILRES® BS 30 is a solventless silicone concentrate based on a mixture of silane and siloxane. In its undiluted form, it provides water and stain repellency to mineral substrates while enhancing their appearance. SILRES® BS 30 is suitable for a wide variety of mineral substrates used in the tile industry, including tumbled marble, limestone, slate, and saltillo clay tile.

SILRES® BS 1803 is a solvent-free emulsion based on organo-modified silanes and siloxanes. It is specifically designed to act as a water-repellent admixture for semi-dry concrete and other non-load-bearing cement-based building materials, including paving stones and concrete blocks. SILRES® BS 1803 helps to minimize the amount of water absorbed by the concrete or other cement-based materials, thereby enhancing their durability and resistance to moisture-related issues.

GENIOSIL® GF 9 is an organofunctional silane with various applications. It is commonly used in building & construction adhesives, Flooring installation, Industrial adhesives, Interior paints & coatings, and waterproofing membranes. GENIOSIL® GF 9 is particularly effective in glass-fiber reinforced or mineral-filled polymers as well as a surface modifier.

RTV108 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure. RTV102, RTV103, RTV106, RTV108, RTV109, RTV112, RTV116 and RTV118 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure. Since all these sealants utilize a moisture cure system, they must not be used in thicknesses of greater than 6mm (1/4 in.). Where section depths exceed 6mm (1/4 in.), Momentive Performance Materials one component, addition cure or two-component silicone rubber compounds are recommended.

RTV103 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure. RTV102, RTV103, RTV106, RTV108, RTV109, RTV112, RTV116 and RTV118 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure. Since all these sealants utilize a moisture cure system, they must not be used in thicknesses of greater than 6mm (1/4 in.). Where section depths exceed 6mm (1/4 in.), Momentive Performance Materials one component, addition cure or two-component silicone rubber compounds are recommended.

RTV102 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure. RTV102, RTV103, RTV106, RTV108, RTV109, RTV112, RTV116 and RTV118 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure. Since all these sealants utilize a moisture cure system, they must not be used in thicknesses of greater than 6mm (1/4 in.). Where section depths exceed 6mm (1/4 in.), Momentive Performance Materials one component, addition cure or two-component silicone rubber compounds are recommended.

RTV106 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure. RTV102, RTV103, RTV106, RTV108, RTV109, RTV112, RTV116 and RTV118 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure. Since all these sealants utilize a moisture cure system, they must not be used in thicknesses of greater than 6mm (1/4 in.). Where section depths exceed 6mm (1/4 in.), Momentive Performance Materials one component, addition cure or two-component silicone rubber compounds are recommended.

XtraBond® 150 is a one component, permanently flexible, RTV (Room Temperature Vulcanizing) mildew-resistant silicone sealant that is the industry standard. The product’s tough chemical resistance makes it a worry-free solution for a wide range of applications.

Arma 901-90AS (800% Elongation) is a two-component, polyurea elastomer spray system that can be applied under harsh environmental conditions. These products are non-hydrophobic with excellent chemical and abrasion resistance, providing excellent elongation.

Arma 60A polyurea/polyurethane hybrid is waterproof, soft and rubber-like. It is skid-resistant and provides an extremely tough monolithic membrane for flexible surfaces. This product exhibits excellent abrasion and chemical resistance and contains no VOCs.

Avery Dennison™ FASSON® SSL FG is a 1.25" pattern-gum, self-sealing lap tape for applications requiring quick stick and good adhesion to plastics and other low surface energy substrates. It is designed for poly, metal and scrim facings for the insulation industry.

METAL-CLAD® ALKYD ENAMEL 8-HES-1722 is a all-purpose, durable utility enamel designed for new construction, industrial maintenance, OEM, and metal fabrication applications. Offers state-of-the-art corrosion protection with excellent gloss retention, superior durability, and one-coat coverage. May be applied direct to metal without a primer.

METAL-CLAD® ALKYD ENAMEL 3-HES-4043 is a all-purpose, durable utility enamel designed for new construction, industrial maintenance, OEM, and metal fabrication applications. Combines state-of-the-art corrosion protection with excellent gloss retention, superior durability, and onecoat coverage. May be applied direct to metal without a primer. It is used as airless or conventional spray.

L&L #300 Mastic is a high-build, waterborne, elastomeric barrier coating. Its unique blend of premium acrylic resins and pigments combine to form a durable, mildew-resistant film with exceptional adhesion and flexibility. L&L 300 is a breathing mastic which allows damaging substrate moisture to escape, while protecting against ultra-violet, water and air-flow intrusion.

Crystal Clear 903X is a heavy viscosity sealer for a variety of masonry surfaces where heavy shine and a deep “wet look” is desired. Fast drying and contains a minimum of 30% solids. For outdoor use only.

L&L #300 Mastic EXP is a high-build, waterborne, elastomeric barrier coating. Its unique blend of premium acrylic resins and pigments combine to form a durable, mildew-resistant film with exceptional adhesion and flexibility. L&L 300 is a breathing mastic which allows damaging substrate moisture to escape, while protecting against ultra-violet, water and air-flow intrusion.

UNIFOAM® XPE 33 Dark is made from high-quality polyethylene polymer and additives.

Xtrabond 150 is a one component, permanently flexible, RTV (Room Temperature Vulcanizing) mildew-resistant silicone sealant that is the industry standard. The product’s tough chemical resistance makes it a worry-free solution for a wide range of applications.

GRANICOAT® Spray Chip2 is a revolutionary solid surface material, factory applied by a fabricator, using conventional spray equipment.

Dur-A-Flex CRYL-A-PRIME P-101 is a 100% reactive, fast curing, high strength, methyl methacrylate (MMA) based, acrylic reactive resin. It is formulated to form a cohesive bond with the substrate. This system cannot be thinned with solvents.

15# PVC Glazing Tape is a medium density, closed cell polyvinyl chloride foam with an aggressive, pressure - sensitive acrylic adhesive (A3) on both sides and a 84# poly - coated brown kraft liner. Economical alternative to BGT glazing tape. A3 adhesive provides an excellent combination of tack and holding power. Bonds quickly to most surfaces that are kept clean, dry and free of contamination.

Polyglass Coatings EX-2C Low VOC Topcoat (with A.C.T. B) is a two component highly cross-linked, high performance polyester polyurethane coating providing a high gloss surface finish.

deVan Sealants 570.12 Butyl Tape is a low-cost, all-purpose butyl-based sealing compound. It is available in convenient ready-to-use tapes or beads. This material is tough but pliable, and it can be worked by hand. Thermal expansion and contraction will not cause 570 to flow, sag, or pump from joints.

Cactus® Double Coated Foam Tape G488W is a solvent-based acrylic pressure-sensitive adhesive that offers very high grab tack and peels adhesion level, with an easy remove liner, excellent for applications requiring immediate and durable bonding results.

AmCoat Industries Rhinopoxy Ultra is a two-part high gloss epoxy that offers beauty and protection for the harshest environments. It is a true immersion epoxy that can be used directly on metal or as a tie coat in outdoor projects. It is ideal for pipes, high use railings, and perpetually wet environments. RHINOPOXY ULTRA offers excellent resistance to chemicals, corrosion, and severe environments.

aquaBRIGHT™ has been blended entirely using materials that have been tested to comply with NSFIANSI 61 Potable Water Standards. It can be applied onto virtually any substate.

DurPack® Non-Cross Linked Polyethylene Foam has straight bond structure and it is produced with extrusion method with chemicals and inflator gas addition. Compared to our cross-linked polyethylene foam product DurProx and DurSolex, DurPack (Non-cross Linked Polyethylene Foam) has straight bond structure and it is produced with extrusion method with chemicals and inflator gas addition. Compared to our cross-linked polyethylene foam product DurProx and DurSolex, DurPack is more economical and is mostly used in the application areas where the standards are not as demanding. DurPack is used for sound, heat and humidity insulation and shock protection. DurPack is more economical and is mostly used in the application areas where the standards are not as demanding. DurPack is used for sound, heat and humidity insulation and shock protection.

Intec Foams PE Foam LD15 is a closed cell Polyethylene foam produced in cross-linked or non cross-linked versions.

Lamatek Neoprene Sponge Gasket Tape SCE-41B is a closed cell blend of neoprene sponge, EPDM and synthetic rubber with a dense mass of tiny pores (or cells) to seal out air, moisture, liquid, gas, oil and more. Neoprene rubber tape is ideal for higher temperature applications where the seal isn’t frequently re-opened or broken. Lamatek’s neoprene rubber tape is available in several grades from soft to firm to absorb various weights and compression levels.

QC SURPRO SB A two-part, solvent-based polyurethane that forms a high-solids coating, QC SURPRO SB preserves and protects any interior above-grade concrete, masonry or stone (SB stands for solvent-based). This product meets federal VOC regulations and is highly resistant to most harsh chemicals (solvents, gasoline, etc.). QC SURPRO SB is the most durable, soil-resistant and chemical-resistant barrier coating of the QC sealers.

Concrete Coatings Durathane is a two-component polyester/aliphatic polyurethane floor sealer that exhibits excellent characteristics for abrasion resistance, chemical resistance, flexibility, weathering and UV stability.

Lamatek Neoprene Sponge Gasket Tape SCE-45B is a closed cell blend of neoprene sponge, EPDM and synthetic rubber with a dense mass of tiny pores (or cells) to seal out air, moisture, liquid, gas, oil and more. Neoprene rubber tape is ideal for higher temperature applications where the seal isn’t frequently re-opened or broken. Lamatek’s neoprene rubber tape is available in several grades from soft to firm to absorb various weights and compression levels.

GRANICOAT® Nury is a revolutionary solid surface material, factory applied by a fabricator, using conventional spray equipment.

Duro-Lak FS 020 is a class A, interior, water base, fire retardant paint, manufactured to meet ASTME84. Official testing is done at 155 ft²/gallon to achieve a class A rating. This product can be applied over different uncoated woods with excellent adhesion and flame protection after curing. Upon exposure to heat and flame, a char forms on the surface of the wood which acts as a fire, heat, and smoke. It is destinated to all uncoated wooden or wood derivative substrates used where fire retardancy and flame spreading are an issue. FS 020 is not permanent to the wood substrate so for improve the chemical and physical properties it is required the top coat FS 021-20.

Batf Industry BATF-5238 is a odorless interior paints.