Products in Building Materials: Chemical Resistant

RTU Adhesive B is a two-component, addition-curing silicone composition curing to a soft silicone adhesive.

SILPURAN® 2114 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive with high adhesive strength. It belongs to the silicone gel category. SILPURAN® 2114 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.

SILPURAN® 2122 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive with high adhesive strength. It belongs to the silicone gel category. SILPURAN® 2122 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.

SILPURAN® 2100 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive. It belongs to the silicone gel category. SILPURAN® 2100 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.

SILPURAN® 2130 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive. It belongs to the silicone gel category. SILPURAN® 2130 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.

SILPURAN® 2112 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive. It belongs to the silicone gel category. SILPURAN® 2112 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.

SILPURAN® 2117 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive. It belongs to the silicone gel category. SILPURAN® 2117 A/B can be used as a skin adhesive in medical applications. It is especially suitable for bonding external mammary prostheses to the patient’s skin.

GENIOSIL® GF 9 is an organofunctional silane with various applications. It is commonly used in building & construction adhesives, Flooring installation, Industrial adhesives, Interior paints & coatings, and waterproofing membranes. GENIOSIL® GF 9 is particularly effective in glass-fiber reinforced or mineral-filled polymers as well as a surface modifier.

Turbo Fuse 16 HS green wicking grade threadlocker is a fast curing, Green, medium strength, wicking grade, anaerobic thread-locking compound for bonding and sealing threads, and pre-assembled parts. This threadlocker is highly resistant to heat, vibrations, water, gasses, oils, hydrocarbons and many chemicals.

BD590 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD590 has a working time of 70 to 100 minutes and achieves nearly 90 percent of its ultimate strength in 180 to 240 minutes at room temperature curing. BD590 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD590 bonds very strongly to steel, stainless steel, and aluminum metals. BD590 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD300 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD300 has a working time of 3 to 6 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. BD300 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD300 bonds very strongly to steel, stainless steel, and aluminum metals. BD300 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

RodLock® is a two-part non sag methacrylate, structural bonding adhesive designed for the structural bonding of steel and fiberglass rods into natural stone, granite, marble and porcelain counter top products. Combined at a ratio of 1:1, RodLock has a working time of 4 to 8 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. RodLock provides high strength bonds to the above reference surfaces with generally no preparation effort. RodLock bonds very strongly to steel, stainless steel, and aluminum metals. RodLock adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance. Due to its high strength, keep groove widths and depths to a minimum, as wide and deep grooves may cause RodLock to crack the granite upon reacting and shrinking. We are not liable for cracked counter tops due to this effect.

BD1020 is a two-part methacrylate, flexibilized, super toughened, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD1020 has a working time of 3 to 7 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. BD1020 provides high strength, superior impact strength, and very flexible bonds to the above reference surfaces with generally no preparation effort. BD1020 bonds very strongly to steel, stainless steel, and aluminum metals and will allow a great deal of movement of the substrates due to CTE (coefficient of thermal expansion) differences. BD1020 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD305 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD305 has a working time of 2 to 4 minutes and achieves nearly 90 percent of its ultimate strength in 8 to 10 minutes at room temperature curing. BD305 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD305 bonds very strongly to steel, stainless steel, and aluminum metals. BD305 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD54750 is a low viscosity polyamine epoxy product. The BD54750 is designed for metals and plastics bonding. This product is ideal for highway and bridge deck repairs, potting, casting, and encapsulation, floor systems, linings of tanks and pipes, and coatings. This product has good chemical, corrosion, and water resistance. It is especially formulated for a 1:1 mix ratio for use in side by side cartridges, or to be used by hand mixing, or use with meter mix equipment. A handling cure is normally achieved at room temperature within 4 hours with a full cure at room temperature within 48 hours. To accelerate the final cure, or to quicken the handling simply elevate the temperature.

BD350 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD350 has a working time of 25 to 45 minutes and achieves nearly 90 percent of its ultimate strength in 60 to 90 minutes at room temperature curing. BD350 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD350 bonds very strongly to steel, stainless steel, and aluminum metals. BD350 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BF420FX is a two-part methacrylate, flexibilized, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BF420FX has a working time of 3 to 7 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. BF420FX provides high strength and very flexible bonds to the above reference surfaces with generally no preparation effort. BF420FX bonds very strongly to steel, stainless steel, and aluminum metals and will allow a great deal of movement of the substrates due to cte (coefficient of thermal expansion) differences. BF420FX adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD425FX is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD425FX has a working time of 25 to 35 minutes and achieves nearly 90 percent of its ultimate strength in 50 to 80 minutes at room temperature curing. BD425FX provides high strength bonds to the above reference surfaces with generally no preparation effort. BD425FX bonds very strongly to steel, stainless steel, and aluminum metals. BD425FX adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD320FX is a two-part methacrylate, flexibilized, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD320FX has a working time of 8 to 12 minutes and achieves nearly 90 percent of its ultimate strength in 18 to 25 minutes at room temperature curing. BD320FX provides high strength and very flexible bonds to the above reference surfaces with generally no preparation effort. BD320FX bonds very strongly to steel, stainless steel, and aluminum metals and will allow a great deal of movement of the substrates due to coefficient of thermal expansion differences. BD320FX adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

ClipLock® is a two-part non sag methacrylate, structural bonding adhesive designed for the structural bonding of rotolocs, grommets, dishwasher mounts, sink clips into natural stone, granite, marble and porcelain counter top products. Combined at a ratio of 1:1, ClipLock has a working time of 4 to 8 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. ClipLock provides high strength bonds to the above reference surfaces with generally no preparation effort. ClipLock bonds very strongly to steel, stainless steel, and aluminum metals. ClipLock adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance. Due to its high strength, keep groove widths and depths to a minimum, as wide and deep grooves may cause ClipLock to crack the granite upon reacting and shrinking. We are not liable for cracked counter tops due to this effect.

BD422FX is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD422FX has a working time of 18 to 24 minutes and achieves nearly 90 percent of its ultimate strength in 35 to 50 minutes at room temperature curing. BD422FX provides high strength and very flexible bonds to the above reference surfaces with generally no preparation effort. BD422FX bonds very strongly to steel, stainless steel, and aluminum metals and will allow a great deal of movement of the substrates due to coefficient of thermal expansion differences. BD422FX adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD550 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD550 has a working time of 40 to 60 minutes and achieves nearly 90 percent of its ultimate strength in 100 to 120 minutes at room temperature curing. BD550 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD550 bonds very strongly to steel, stainless steel, and aluminum metals. BD550 adhesives are highly pigmented white and have UV stabilizers in them, however BD550 must not be used to create imperceptible seams in countertops or for seaming countertops.

BD330 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD330 has a working time of 18 to 32 minutes and achieves nearly 90 percent of its ultimate strength in 45 to 70 minutes at room temperature curing. BD330 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD330 bonds very strongly to steel, stainless steel, and aluminum metals. BD330 adhesives are not be used to create imperceptible seams in countertops or for seaming countertops.

BD2045 is a two-part methacrylate, flexibilized, super toughened, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD2045 has a working time of 40 to 60 minutes and achieves nearly 90 percent of its ultimate strength in 80 to 100 minutes at room temperature curing. BD2045 provides high strength, superior impact resistance, and very flexible bonds to the above reference surfaces with generally no preparation effort. BD2045 bonds very strongly to steel, stainless steel, and aluminum metals. BD2045 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD560 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD560 has a working time of 50 to 65 minutes and achieves nearly 90 percent of its ultimate strength in 140 to 180 minutes at room temperature curing. BD560 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD560 bonds very strongly to steel, stainless steel, and aluminum metals. BD560 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD530 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD530 has a working time of 25 to 40 minutes and achieves nearly 90 percent of its ultimate strength in 90 to 150 minutes at room temperature curing. BD530 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD530 bonds very strongly to steel, stainless steel, and aluminum metals. BD530 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD2025 is a two-part methacrylate, flexibilized, super toughened, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD2025 has a working time of 25 to 35 minutes and achieves nearly 90 percent of its ultimate strength in 50 to 80 minutes at room temperature curing. BD2025 provides high strength, superior impact resistance, and very flexible bonds to the above reference surfaces with generally no preparation effort. BD2025 bonds very strongly to steel, stainless steel, and aluminum metals. BD2025 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD310 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD310 has a working time of 8 to 12 minutes and achieves nearly 90 percent of its ultimate strength in 18 to 25 minutes at room temperature curing. BD310 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD310 bonds very strongly to steel, stainless steel, and aluminum metals. BD310 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD404 is a two-part methacrylate, low exotherm, high flexural, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, various metals, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 2:1, BD404 has a working time of 3 to 6 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. BD404 provides high strength bonds to the above reference surfaces with generally no preparation effort, yet BD404 has very high elongation and flexibility. BD404 bonds very strongly to steel, stainless steel, and aluminum metals. BD404 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD403 is a two-part methacrylate, low exotherm, high flexural, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, various metals, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD403 has a working time of 3 to 6 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. BD403 provides high strength bonds to the above reference surfaces with generally no preparation effort, yet BD403 has very high elongation and flexibility. BD403 bonds very strongly to steel, stainless steel, and aluminum metals. BD403 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

Turbo Seal Series 65 Purple is a high performance anaerobic thread sealant designed for the locking and sealing of metal threaded pipes and fittings. The product cures quickly in the absence of air between close fitting surfaces and provides pressure resistance immediately after application. It is ideal to seal against gasses, water, LPG, hydrocarbons, oils and other chemicals. Excellent thixotropic property prevents migration of the sealant before and during curing.

Turbo Seal Series 55 Brown is a high performance anaerobic thread sealant designed for the locking and sealing of metal threaded pipes and fittings. The product cures quickly in the absence of air between close fitting surfaces and provides pressure resistance immediately after application. It is ideal to seal against gasses, water, LPG, hydrocarbons, oils and other chemicals. Excellent thixotropic property prevents migration of the sealant before and during curing.

Turbo Lock Series 13 is a high temperature, high strength, permanent, anaerobic thread-locking compound. It is highly resistance to heat, vibrations, water, gasses, oils, hydrocarbons and many chemicals. Disassembles with high heat and hand tools.

Turbo Lock Series 14 is a fast curing, high strength, permanent, anaerobic thread-locking compound for bonding and sealing threads. It is highly resistance to heat, vibrations, water, gasses, oils, hydrocarbons and many chemicals. Disassemble with heat and tools.

Turbo Lock Series 15 is a fast curing, large bolt, high strength, anaerobic thread-locking compound for bonding and sealing threads. Prevents rusting of threads. It is highly resistance to heat, vibrations, water, gasses, oils, hydrocarbons and many chemicals. Disassembles with heat and hand tools.

FloorShield-IH impregnating hardener is a penetrating Nano-Lithium treatment for terrazzo, stone, and polished concrete surfaces formulated specifically for surfaces that will be ground and polished.