Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Applications
- Ideal for fastener up to 1" (25 mm) in diameter
- Transmission and engine block studs, valve sets, etc
- High strength, permanent, eliminates need for double nutting and welding. Prevents corrosion / leakage
- Excellent performance of even oily surfaces
- Fasteners on vibrating machines or moving components
- Meets Military specifications: MIL-S-46163 and MIL-S-22473
- Application Method
Surfaces should be dry, clean, and free of any contamination. Thread locker should be applied to the bolt in sufficient quantity to fill threads. This thread locker is specifically formulated to give controlled friction and torque/tension ratio during assembly.
Properties
- Color
- Physical Properties
Value Units Test Method / Conditions Coefficient of Thermal Expansion 80x10⁻⁶ K-1 ASTM D 696 Coefficient of Thermal Conductivity 0.1 W/(m.K) ASTM C 177 Specific Heat 0.3 kJ/(kg.K) - - Typical Properties
Value Units Test Method / Conditions Loctite® Equivalent 271.0 - - Permabond® Equivalent HM128 - - - Chemical Resistance
Value Units Test Method / Conditions Initial Strength Retained for Acetone (at 22ºC, 500hrs) 95 % - Initial Strength Retained for Ethanol (at 22ºC, 500hrs) 100 % - Initial Strength Retained for Motor Oil (at 125ºC, 500hrs) 95 % - Initial Strength Retained for Gasoline (at 22ºC, 500hrs) 100 % - Initial Strength Retained for Brake Fluid (at 22ºC, 500hrs) 100 % - Initial Strength Retained for Water/Glycol (at 87ºC, 500hrs) 90 % - Initial Strength Retained for Acetone (at 22ºC, 1000hrs) 90 % - Initial Strength Retained for Ethanol (at 22ºC, 1000hrs) 100 % - Initial Strength Retained for Motor Oil (at 125ºC, 1000hrs) 95 % - Initial Strength Retained for Gasoline (at 22ºC, 1000hrs) 100 % - Initial Strength Retained for Brake Fluid (at 22ºC, 1000hrs) 100 % - Initial Strength Retained for Water/Glycol (at 87ºC, 1000hrs) 80 % - - Cured Properties
Value Units Test Method / Conditions Handling Cure Time 10 minutes - Functional Cure Time 1 - 3 hrs - Full Cure Time 24 hrs - Breakaway Torque (M10 Steel Nuts and Bolts) 28 (230) N.m (lbs.in) ISO 10964 Prevail Torque (M10 Steel Nuts and Bolts) 31 (320) N.m (lbs.in) ISO 10964 Break Loose Torque (M10 Steel Nuts and Bolts, Pre-Torqued to 5 Nm) 40 (330) N.m (lbs.in) ISO 10964 Maximum Prevail Torque (M10 Steel Nuts and Bolts, Pre-Torqued to 5 Nm) 57 (510) N.m (lbs.in) ISO 10964 Compressive Shear Strength of Steel Pins and Collars min. 8 (1000) N/mm² (psi) ISO 10123 Temperature Range -55 to 150 ºC - - Adhesive Properties
Value Units Test Method / Conditions Color Red - - Composition Methacrylate ester - - Viscosity (at 20 rpm, 25ºC, Brookfield RVT Spindle 3) 500 cPs - Specific Gravity 1.11 - - Maximum Screw Size 1 (25) inches (mm) - Flash Point min. 100 ºC - Solvent Content None - -
Regulatory & Compliance
- Quality Standards
Safety & Health
- Precautions
This product and the auxiliary materials normally combined with it are capable of producing adverse health effects ranging from minor skin irritation to serious systemic effects. None of these materials should be used, stored, or transported until the handling precautions and recommendations as stated in the Material Safety Data Sheets (MSDS).
Storage & Handling
- Shelf Life
- 2 Years
- Storage Information
Anaerobic adhesives are ideally stored in a cool, dry place in unopened containers at a room temperature between 46°F to 82°F. Please do not return unused material to its original container.