Products in Structural Components: Chemical Resistant

BD300 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD300 has a working time of 3 to 6 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. BD300 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD300 bonds very strongly to steel, stainless steel, and aluminum metals. BD300 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD590 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD590 has a working time of 70 to 100 minutes and achieves nearly 90 percent of its ultimate strength in 180 to 240 minutes at room temperature curing. BD590 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD590 bonds very strongly to steel, stainless steel, and aluminum metals. BD590 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

ClipLock® is a two-part non sag methacrylate, structural bonding adhesive designed for the structural bonding of rotolocs, grommets, dishwasher mounts, sink clips into natural stone, granite, marble and porcelain counter top products. Combined at a ratio of 1:1, ClipLock has a working time of 4 to 8 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. ClipLock provides high strength bonds to the above reference surfaces with generally no preparation effort. ClipLock bonds very strongly to steel, stainless steel, and aluminum metals. ClipLock adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance. Due to its high strength, keep groove widths and depths to a minimum, as wide and deep grooves may cause ClipLock to crack the granite upon reacting and shrinking. We are not liable for cracked counter tops due to this effect.

BD1020 is a two-part methacrylate, flexibilized, super toughened, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD1020 has a working time of 3 to 7 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. BD1020 provides high strength, superior impact strength, and very flexible bonds to the above reference surfaces with generally no preparation effort. BD1020 bonds very strongly to steel, stainless steel, and aluminum metals and will allow a great deal of movement of the substrates due to CTE (coefficient of thermal expansion) differences. BD1020 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD350 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD350 has a working time of 25 to 45 minutes and achieves nearly 90 percent of its ultimate strength in 60 to 90 minutes at room temperature curing. BD350 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD350 bonds very strongly to steel, stainless steel, and aluminum metals. BD350 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

RodLock® is a two-part non sag methacrylate, structural bonding adhesive designed for the structural bonding of steel and fiberglass rods into natural stone, granite, marble and porcelain counter top products. Combined at a ratio of 1:1, RodLock has a working time of 4 to 8 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. RodLock provides high strength bonds to the above reference surfaces with generally no preparation effort. RodLock bonds very strongly to steel, stainless steel, and aluminum metals. RodLock adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance. Due to its high strength, keep groove widths and depths to a minimum, as wide and deep grooves may cause RodLock to crack the granite upon reacting and shrinking. We are not liable for cracked counter tops due to this effect.

BD422FX is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD422FX has a working time of 18 to 24 minutes and achieves nearly 90 percent of its ultimate strength in 35 to 50 minutes at room temperature curing. BD422FX provides high strength and very flexible bonds to the above reference surfaces with generally no preparation effort. BD422FX bonds very strongly to steel, stainless steel, and aluminum metals and will allow a great deal of movement of the substrates due to coefficient of thermal expansion differences. BD422FX adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BF420FX is a two-part methacrylate, flexibilized, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BF420FX has a working time of 3 to 7 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. BF420FX provides high strength and very flexible bonds to the above reference surfaces with generally no preparation effort. BF420FX bonds very strongly to steel, stainless steel, and aluminum metals and will allow a great deal of movement of the substrates due to cte (coefficient of thermal expansion) differences. BF420FX adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD425FX is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD425FX has a working time of 25 to 35 minutes and achieves nearly 90 percent of its ultimate strength in 50 to 80 minutes at room temperature curing. BD425FX provides high strength bonds to the above reference surfaces with generally no preparation effort. BD425FX bonds very strongly to steel, stainless steel, and aluminum metals. BD425FX adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD305 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD305 has a working time of 2 to 4 minutes and achieves nearly 90 percent of its ultimate strength in 8 to 10 minutes at room temperature curing. BD305 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD305 bonds very strongly to steel, stainless steel, and aluminum metals. BD305 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD320FX is a two-part methacrylate, flexibilized, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD320FX has a working time of 8 to 12 minutes and achieves nearly 90 percent of its ultimate strength in 18 to 25 minutes at room temperature curing. BD320FX provides high strength and very flexible bonds to the above reference surfaces with generally no preparation effort. BD320FX bonds very strongly to steel, stainless steel, and aluminum metals and will allow a great deal of movement of the substrates due to coefficient of thermal expansion differences. BD320FX adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD560 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD560 has a working time of 50 to 65 minutes and achieves nearly 90 percent of its ultimate strength in 140 to 180 minutes at room temperature curing. BD560 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD560 bonds very strongly to steel, stainless steel, and aluminum metals. BD560 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD550 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD550 has a working time of 40 to 60 minutes and achieves nearly 90 percent of its ultimate strength in 100 to 120 minutes at room temperature curing. BD550 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD550 bonds very strongly to steel, stainless steel, and aluminum metals. BD550 adhesives are highly pigmented white and have UV stabilizers in them, however BD550 must not be used to create imperceptible seams in countertops or for seaming countertops.

BD330 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD330 has a working time of 18 to 32 minutes and achieves nearly 90 percent of its ultimate strength in 45 to 70 minutes at room temperature curing. BD330 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD330 bonds very strongly to steel, stainless steel, and aluminum metals. BD330 adhesives are not be used to create imperceptible seams in countertops or for seaming countertops.

BD2045 is a two-part methacrylate, flexibilized, super toughened, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD2045 has a working time of 40 to 60 minutes and achieves nearly 90 percent of its ultimate strength in 80 to 100 minutes at room temperature curing. BD2045 provides high strength, superior impact resistance, and very flexible bonds to the above reference surfaces with generally no preparation effort. BD2045 bonds very strongly to steel, stainless steel, and aluminum metals. BD2045 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD530 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD530 has a working time of 25 to 40 minutes and achieves nearly 90 percent of its ultimate strength in 90 to 150 minutes at room temperature curing. BD530 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD530 bonds very strongly to steel, stainless steel, and aluminum metals. BD530 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD2025 is a two-part methacrylate, flexibilized, super toughened, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD2025 has a working time of 25 to 35 minutes and achieves nearly 90 percent of its ultimate strength in 50 to 80 minutes at room temperature curing. BD2025 provides high strength, superior impact resistance, and very flexible bonds to the above reference surfaces with generally no preparation effort. BD2025 bonds very strongly to steel, stainless steel, and aluminum metals. BD2025 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD310 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD310 has a working time of 8 to 12 minutes and achieves nearly 90 percent of its ultimate strength in 18 to 25 minutes at room temperature curing. BD310 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD310 bonds very strongly to steel, stainless steel, and aluminum metals. BD310 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD404 is a two-part methacrylate, low exotherm, high flexural, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, various metals, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 2:1, BD404 has a working time of 3 to 6 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. BD404 provides high strength bonds to the above reference surfaces with generally no preparation effort, yet BD404 has very high elongation and flexibility. BD404 bonds very strongly to steel, stainless steel, and aluminum metals. BD404 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD403 is a two-part methacrylate, low exotherm, high flexural, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, various metals, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD403 has a working time of 3 to 6 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. BD403 provides high strength bonds to the above reference surfaces with generally no preparation effort, yet BD403 has very high elongation and flexibility. BD403 bonds very strongly to steel, stainless steel, and aluminum metals. BD403 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

Blome International Sealant 43 is a two-component, high elongation polyurea sealant with excellent chemical resistance, high bond strength and exceptional elongation properties. Blome Sealant 43 is designed for up to 20% linear movement of installed joint width. It exhibits excellent resistance to most mineral acids, dilute organic acids, alkaline solutions, oxidizers and salts. It has excellent adhesion to a variety of substrates including concrete, tile, steel and brick. Blome Sealant 43 is highly resilient and retains its elastomeric properties over a temperature range of -10°F to 140°F. The material exhibits rapid curing characteristics for fast turnaround.

ClariShield® Solvent-Based Natural Look Clear Sealer provides a low-sheen finish that adds depth of color and enhances the appearance of concrete and pavers.

TouchStone™ T-2000 Epoxy is a two component, water cleanable, 100% solid epoxy adhesive compound developed for setting of ceramic tile and stone on horizontal or vertical surfaces.

Duropoxi is a two-component, 100% solids, chemical resistant, exterior grade epoxy adhesive. Non-sag gel epoxy.

Clarishield® Oil-Based Gloss Clear Sealer is an exterior waterproofing sealer that adds gloss and durability to both vertical and horizontal brick, stone, masonry and mortar- or epoxy-set natural stone. It can also be used as a sealer on flagstone, brick or other cementitious materials. It is suitable for use on traffic-bearing surfaces. It is designed for use over bare concrete or previously stained concrete. The non-yellowing clear surface protects against UV rays, water seepage and common chemicals. ClariShield® Oil-Based Gloss is 23% Solids content. H&C® ClariShield® Oil-Based Gloss Finish Clear Concrete Sealer enriches color and appearance. This premium oilbased formula adds depth of color with a thin protective film.

Duropoxi F is a two-component, 100% solids, chemical resistant, exterior grade epoxy adhesive. Non-sag gel epoxy. Flexible.

Tripoxy™ Primer is a two-part, solvent-based maintenance primer with high performance. This primer provides excellent corrosion protection by utilizing a combination of rust inhibitors. When applied to properly prepared surfaces, Tripoxy Primer has excellent adhesion and water resistance. This primer also has good flow and leveling properties.