THE BREWER COMPANY HEAVY DUTY NON FIBERED ASPHALT EMULSION

• Can be applied by brush, squeegee or airless spray equipment.
• Cures to a tough, flexible protective barrier that resists “alligator” cracking and chemical attacks.
• Thixotropic viscosity allows maximum film thickness and resistance to sagging or flow.
• Compatible with EPS insulation, metal substrates and asphalt systems.
• Non-Asbestos.
• Zero Volatile Organic Compounds (VOC).

Uses:

• As a protective coating over smooth asphalt roofs, metal roofs and cured solvent-borne primers and coatings.
• With reinforcing fabrics over medium to severely alligatored asphalt flood coats.
• Dampproofing of masonry and concrete surfaces.

Applications:

• Ready to apply.
• Do not heat.
• Do not thin.

• All work surfaces must be clean, damp or dry, but free of standing water, free of dirt, dust, debris, oils, loose and/or embedded gravel, un-adhered coatings, deteriorated membranes, and other contaminants that may result in a surface that is not sound.
• All necessary repairs must be completed before application to ensure optimum performance.
• Extremely dusty or dry surfaces should be primed with Fortress® # 5302 Asphalt Primer or Fortress® #5085 HydroPrime™ 200.

Reinforced:

• Apply to the properly prepared surface at a rate of 1 - 2 gallons per square.
• Embed the first ply of Fortress® reinforcement (starter course), brushing the reinforcement into the adhesive.
• Assure that the reinforcement conforms to the surface and no bridging or fish mouthing occurs.
• Apply another coat of adhesive and embed the second course of reinforcement., overlapping the reinforcements in accordance with the appropriate spacing for the desired number of plies to be obtained.
• After the final ply, apply the adhesive at a rate of 1 - 2 gallons per square before surfacing.

Non-reinforced:

• Apply to the prepared surface at a rate of 2 - 4 gallons per square.
• To avoid pinholes and ensure maximum performance, the application of two coats, each at 1/2 the total coverage rate and applied perpendicular to one another, are recommended.

• Do not use with or on 100% rubber or plastic substrates.
• Do not use on or with products containing coal tar.
• Do not apply to areas that pond water.
• Do not apply if temperatures are expected to fall below 45ºF or rain or heavy dew is expected, within 24 hours of application.
• Do not use where this product may come in contact with potable water.
• Do not thin.
• Do not freeze.

• Immediately rinse/flush equipment and tools with mineral spirits after use, exercising all flammable liquid precautions.
• Use waterless hand cleaner on the skin.

• 5-gallon pails (45 lbs)
• 55-gallon drums (507 lbs)