HBS-200 Rubber Tix

Working Conditions:! To only be used at temperatures above +5°C.
Preliminary Surface Treatment:! Surfaces must be dry, clean, and
free of dust and grease. The use of a water based acrylic
primer on porous or corroded/damaged surfaces can enhance
the adherence of HBS-200® and can minimalize bladder
formation.
Tools:! Brush, roller or trowel.

Waterproof and airtight
Very high level of permanent elasticity (900%)
Excellent bonding to many substrates
Easy to apply, ideal for vertical applications and faster layer
build-up
Durable quality: durability of minimum 20 years (tested
according to EN 1297)
Protects against corrosion and erosion
All-weather and UV resistant
Salt and chemical resistant
Paintable
Solvent-free
VOC-free
Non-toxic
Water-based

Suitable for sealing and protecting a wide variety of materials,
such as concrete, metal, stone, wood, bitumen, zinc, PVC,
EPDM (test first), etc. For floors, partitions, walls, seams, joints,
conduits and structural components. Excellent for both interior
and exterior applications (bathrooms, cellars, balconies, roofs,
etc.) including gutters, shower basins, conduit ducts, floor
seams, expansion joints, window frame joints and ground level
items. Ideal for vertical application on walls and partitions. Also
suitable as a waterproof layer under tiles in damp environments
such as bathrooms, swimming pools, balconies, terraces, etc.

Coverage: Waterproofing: ± 2.7 l/m2 at a dry film thickness of
2mm. Airtight Construction: ± 1 l/m2 at a dry film thickness of
0.7mm.
Directions for use:!
Before use, stir manually until a homogenous color is obtained.
It is not recommended to use an electric mixer with a high
rotational speed for stirring. Apply in multiple layers. Preferably,
let the previous layer properly dry before applying the next
layer. Drying time depends on relative humidity, temperature
and surface. For seam, crack and tear-bridging applications,
GRIFFON GeoTextile should be used. GRIFFON GeoTextile must
be applied in still wet HBS-200® Rubber Tix. Then immediately
level off with a second layer of HBS-200® Rubber Tix. Always
ensure a layer thickness of at least 2 mm after curing. After
approximately 60 minutes a surface skin forms, which can be
loaded with (light) rainfall after 4 hours. Completely waterproof
after 24 hours. At lower temperatures and humid weather
conditions, take longer drying times into account. For faster
waterproofing of the top layer use HBS-200® Accelerator.
Stains/residue:! Immediately remove wet residue with water,
GRIFFON Wipes or GRIFFON Hand Cleaner. Dried residue can
only be removed mechanically.
Points of attention:! To only be used at temperatures above +5°C.
Stir thoroughly by hand before use, do not use an electric mixer.
After approximately 60 minutes a surface skin forms, which
can be loaded with (light) rainfall after 4 hours. Completely
waterproof after 24 hours. At lower temperatures and humid
weather conditions, take longer drying times into account. It is
strongly recommended not to spray HBS-200 Rubber Tix without
wearing gloves, protective clothing, eye and face protection. If
a joint sealant is used in combination with HBS-200® Liquid
Rubber / Rubber Tix, we strongly recommend to use a neutral
silicone sealant, for example GRIFFON S-200, to prevent
discoloration of the sealant.