Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Backing Material Type
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features
- Double coated tape construction.
- Moisture resistant acrylic adhesive.
- Polyethylene foam carrier.
- Super calendered kraft release liner.
- Environmental Resistance
- Chemical Resistance
- UV Resistance
- Moisture Resistance
- Benefits
- Dimensional stability and good die cutting characteristics.
- Strong bond to ceramic and glass, even in high moisture environments.
- Gap filling properties and good conformability.
- High tensile strength and tear resistance with excellent die cutting performance.
- Two-year warranty.
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Common Applications
- Automotive
- Building and Construction
- General Converting
- White Goods
- Print and Packaging
- Transportation
- Product Construction
Liner: 60# White Kraft
Adhesive 1: Acrylic
Carrier: Polyethylene Foam
Adhesive 2: ULNA Acrylic- Application Techniques
- It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry, and free of grease or oil.
- Bond strength is dependent upon the amount of adhesive-to-surface contact developed.
- Note that different pressure, time and temperature on different (film / rigid) surface achieves different performance.
Properties
- Typical Properties
Value Units Test Method / Conditions Application Temperature min. 10 ºC - Loop Tack (180º, 20 in (508 mm) / min at Room Temperature), (Substrate SS - Liner - Initial) 1057.0 N/m ASTM D6195 Peel Adhesion (180º, 12 in (300 mm) / min at Room Temperature), (Substrate PP - Liner - 72 hr dwell) 1057.0 N/m ASTM D3330 Peel Adhesion (180º, 12 in (300 mm) / min at Room Temperature), (Substrate PP - Unwind - 72 hr dwell) 969.0 N/m ASTM D3330 Peel Adhesion (180º, 12 in (300 mm) / min at Room Temperature), (Substrate SS - Liner - 72 hr dwell) 1233.0 N/m ASTM D3330 Peel Adhesion (180º, 12 in (300 mm) / min at Room Temperature), (Substrate SS - Unwind - 72 hr dwell) 1145.0 N/m ASTM D3330 Service Temperature -40 to 105 ºC - Static Shear Failure Time (180º, 1" sq (6.5 cm2), 1000 g at Room Temperature), (Substrate SS - Liner - 24 hr dwell) min. 10000 Mins ASTM D3654 Thickness (Adhesive 1 - Liner) 53.0 µm ASTM D3652 Thickness (Adhesive 2 - Unwind) 53.0 µm ASTM D3652 Thickness (Carrier) 787.0 µm ASTM D3652 Thickness (Liner) 89.0 µm ASTM D3652 Thickness (Total Caliper) 983.0 µm ASTM D3652 Thickness (Total Caliper without Liner) 894.0 µm ASTM D3652
Storage & Handling
- Storage / Shelf Life
Two years when stored at 64 - 72ºF (18 - 22ºC) / 30 - 70% relative humidity, out of direct sunlight and in original packaging.