Crystal Clear 951

• Non-yellowing on exposure to ultraviolet.
• Non fading. Resists cracking, peeling or flaking.
• Prevents or greatly reduces efflorescence, spalling and staining.
• A water resistant film. Bridges minor cracks and voids to repel water.
• Excellent resistance to strongest cleaning agents, alkalies, mild acids, grease, oil and most chemicals.
• Penetrates deep into substrate to improve resistance to weather erosion.
• Allows masonry to breathe. Good moisture and vapor transmission.
• Ready to use - One part system.

• All surfaces should be clean and structurally sound.
• Remove dust, dirt and atmospheric contamination.
• Repair voids and cracks. Repoint and recaulk as required.
• Surface must be dry. Temperature should be a minimum of 40^oF.
• Application may be made with brush, roller or spray.
• Application must be made in an even, saturating manner.
• Avoid excessive run down, draping or overlapping.
• Protect shrubbery and glass from over-spray.
• Test panels should be made prior to full scale application to determine material type, rate of application, number of coats and method of application best suited to job conditions.

• Do not apply on rainy days or to wet or damp surfaces.
• Any existing sealers or paints need to be thoroughly removed.
• Extreme temperatures or humidity may affect final appearance.
• It is recommended that a test area be done for every application.

Finishes: Gloss, semi-gloss or flat.

Clean Up: Sox Solvent, xylene or mineral spirits formulations available passing FDA specifications and Rule 66 solvent, Clean Air Standards, Ecology Safe Grade.