Products in Fence, Decks & Rails

VITROFLEX TRANSPARENT MCM506NN is the acrylic pouring plate with transparent colors that allow vision through.

DISTITRON® 100 SW - Unsaturated polyester resin in styrene,DCPD. It is used to produce furnitures and sanitary through casting,mix with fillers and/or additives method.

Polynt Group SMC LPMC 7200 Low pressure is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. SMC LPMC 7200 is studied to be molded at low pressure and has been developed for co-molding with phenolic foam. SMC LPMC 7200 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

KLEER-O-SEAL™ employs nanotechnology and the next generation blend of microscopic VOC compliant chemicals that produce deep penetration in concrete. KLEER-O-SEAL™ reacts below the surface to create a durable seal and allow long-term successful results in all applications including difficult UV and freeze thaw environments.

NORSODYNE® H 32433 TA - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce marine,boats through hand lay up and spray up method.

DISTITRON® 184 - Unsaturated polyester resin in styrene,Isophthalic-Neopentylic. It is used to produce bmc and smc manufacture,very good mechanical properties through hot press molding method.

EPOVIA OPTIMUM® KRF 1001 TAS - Bisphenol-A Epoxy Resin based vinyl ester in styrene. It is used to produce pipes and tanks through hand lay up and spray up method.

DISTITRON® 5119 DSX21ZQ - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce reinforced plastics,general purpose through hand lay up and spray up method.

Key #805 Acrylic Sealer is a pigmented waterborne acrylic resin formulated to create a tough UV and abrasion resistant film that protects concrete surfaces from moisture penetration, staining, dirt, wear, and provides a surface that is easy to clean and maintain. KEY #805 is used as a sealer for KEY POOL DECK SYSTEM and for sealing old and new polymer concrete floors, exterior ramps, decks, patios and sidewalks. KEY #805 is an environmentally safe material with quick recoat and easy clean-up after installation.

ELASTA-TUFF 5000 is a single component, liquid applied, high adhesion, moisture cured polyurethane waterproofing coating. It is used as the First Coat or Base Coat for most of the polyurethane deck and roof coating systems supplied by TUFFLEX Polymers. ELASTATUFF 5000 is used in those areas where a low VOC, medium solvent containing base coat is desired.

Stypol® RSP04021 - pre-promoted unsaturated polyester DCPD blend resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

OPTIPLUS - Mold construction. Allows high glass fabric content. Infusion processing possible. Suitable for higher temperature applications.. Main Applications areas are Building and Construction,Electronic and Electrical,Home and Domestic Applications,Industrial sector,Mass Transports,Railway Sector etc.

Fence Guard™ Stain Concentrate Western Redwood is the leader in wood protection and the makers of seal-once and anchorseal wood protection products. Fence Guard stain concentrate is available in four popular semi-transparent colors: Espresso, Coco Brown, Western Redwood, and Sierra Cedar. This is a water-based alkyd formula which provides penetrating oil finish but with easy water clean-up and ultra-low VOC. Fence Guard dilutes with 2 parts water to 1 part concentrate to produce a cost effective, high-quality penetrating stain for wood fences of all types. Fence Guard offers superior protection against the elements, with fade resistant high quality pigments and long-lasting water repellency.

EPOVIA RF-2000SEL is Brominated vinyl ester resin for hand lay up-filament winding and it is generally used in Building and Construction,Chemical Industry,Industrial sector,Railway Sector applicatons

PanTINT® 73 are pigment dispersions for industrial solvent based epoxy coatings. They consist of industrial quality organic and inorganic pigments finely milled in Bisphenol A carrier resin. The pigments chosen for the PanTINT 73 exhibit color strength, durability, chemical resistance and light fastness. Most are suitable for interior and exterior applications. The epoxy carrier resin along with a proprietary additive package allow for high pigment solids and superior compatibility with a number of epoxy based systems. The 73 series’ will be compatible with a wide range of epoxy resin formulations for industrial, maintenance and architectural coating applications.

This is a family of continuous filament reinforcing mats designed for phenolic pultrusion processes. They are treated with a suitable bonding resin and coupling agent and has good handling properties and weight uniformity.

Stypol® RSP10021 - pre-promoted unsaturated polyester DCPD blend resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Onyx Concrete Coatings Polyurethane WB Matte is a two-component, low-VOC premium aliphatic water-based polyurethane. This latest generation polyurethane system provides excellent UV resistance with a matte finish and no solvent odor. This system boasts easy installation, long pot life, as well as great abrasion and chemical resistance and is suitable for both indoor and outdoor uses. Polyurethane WB is also available in a gloss finish.

DISTITRON® 1629 EL5 - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce pipes and tanks through filament winding method.

EPL™ 9 is a 100% pure, slow set, self-leveling elastomer.

TUFFLEX Standard Outdoor RBC is a single component, liquid applied, water cured, urethane-polyurea elastomeric waterproofing membrane. TUFFLEX STANDARD OUTDOOR “RBC” can be used as the primary “Non-Gassing” waterproofing base membrane in many of the traffic bearing waterproofing systems manufactured by TUFFLEX Polymers.

Polycor® Fireblock 2335 SP - intumescent fire retardant properties that conforms to EN 45545 for internal panels in conjunction with fireblock resin systems. Main applications areas are home and domestic applications, mass transports etc.

ENYDYNE® T 67665 A - Unsaturated polyester resin in styrene,DCPD. It is used to produce isothermal sandwich panels through hand lay up and spray up method.

Norsodyne® 3338LSE is general purpose laminating resin with low styrene emission, good water resistance, promoted and non-waxed and it is generally used in automotive, building and construction, industrial sector, marine applicatons.

Detroit Body Filler 60238-50 a non-flowing, pumpable adhesive. 60238-50 should be used for bonding, fairing, filling, and radius applications. This product is designed to have good vertical hang and stack abilities but maintains high flow volumes. 60238-50 is designed to provide a product with an eight-pound weight/gallon with excellent adhesive properties. Gel times can be varied for specific customer needs.

ENYDYNE® H 88222 TA - Unsaturated polyester resin in styrene,DCPD. It is used to produce parts with high resistance to fire through hand lay up and spray up,injection molding,rtm method.

NORSODYNE® Y 93172 - Unsaturated polyester resin in styrene,Tetrahydrophthalic. It is used to produce mastics,putties.

Norsodyne® G-160HV is used for general purpose coatings applicatons.

SKAPS MF 180 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

VITROFLEX OPAQUE B125AN is the colored methacrylate casting plate that does not let light through.

SIMONA® PE 100 black 10024793 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

Norsodyne® 2625TI - thixotropic, promoted and non-waxed, high cross-linked resin, high hdt, excellent chemical resistance. Main applications areas are automotive, building and construction, industrial sector, marine etc.

POLYCOR® ISO NPG PA WHITE 9199 - A pre-accelerated gel coat based on Isophthalic Neopentylglycol unsaturated polyester resin. It is cured using MEKP peroxide.This high performance gel coat is formulated for use in sanitary and marine applications or GRP application where resistance to water and blistering are needed.

ArmorFlex® 99F gel coats are advanced technology polyesters that have been formulated for the fiberglass industry. ArmorFlex® 99F gel coats have lower volatile organic compounds (VOC’s) than standard gel coats.