Products in Fence, Decks & Rails

VITROFLEX TRANSPARENT MCV385NN is the acrylic pouring plate with transparent colors that allow vision through.

US SPEC FS Grout is a blend of specialty cements, admixtures and proprietary aggregates. FS Grout is designed for grouting, anchoring and supporting in applications that require a short turnaround time. FS Grout may be utilized for cold weather placement. It is non-shrink, non-metallic and contains no added chlorides.

ENYDYNE® H 61104 TAPF - Unsaturated polyester resin in styrene,DCPD. It is used to produce furnitures and sanitary through hand lay up and spray up method.

NORSODYNE® H 84233 L - Unsaturated polyester resin in styrene,halogenated. It is used to produce building panels,parts with high resistance to fire through hand lay up and spray up,continuous laminating method.

Polynt Group 781-2140 - vinyl ester infusion resin, unpromoted with a high HDT with blister and corrosion resistance; when formulated as recommended, meets the requirements of FDA title 21 CFR 177.2420. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, chemical industry, composites, food contact, industrial sector, marine, mass transports, paper industry etc.

GacoDeck® TopCoat DT49-1 protects deck surfaces, including balconies, patios, roof decks, ramps and elevated walkways. Apply TopCoat over plywood, concrete, metal, fiberglass and previously coated deck systems. GacoDeck® TopCoat is a water-borne, single component elastomeric coating that incorporates ADA-compliant granules for added slip and wears resistance. The coating is designed to create a fully adhered, durable waterproof membrane that expands and contracts along with the substrate.

DISTITRON® VE 370 SC - Bisphenol-A Epoxy Resin based vinyl ester in styrene. It is used to produce marine,boats through vacuum infusion method.

SIMONA® PE 100 black 10024801 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

InduraGuard 9200 is a high-solids, high-build, single-component, self-priming one-coat solution for weathered galavanized and previously painted structures. It is ideal for a single coat application on transmission towers, substation structures, quanset huts, chain-link fencing, and other aged galvanized structures. InduraGuard 9200 is a modified linseed oil, metallic and ceramic pigmented coating designed for maximum corrosion protection over minimal surface preparation. InduraGuard 9200 provides excellent wetting, is easy to apply by airless spray, roller, brush or paint mitt, and can be applied up to 12 mils DFT in a single coat.

Barvy A Laky Lazurol Outdoor Market Paint S1020 is a synthetic transparent varnish. It is a solution of polyurethane-modified alkyd resin in an aroma-free solvent with the addition of matting agents, waxes, driers and additives.

Ultra Non-Skid® technology initially developed for the United States Navy has been scaled down for commercial use. New to the Ultra Non-Skid® family is Luns permanent non-skid sheet. These non-skid technologies are a direct replacement for non-skid tapes and paints for industrial applications. The product has a wear and impact resistant baseplate of ultra high molecular polyethylene (UHMW-PE). The surface of the sheet is covered with anti-skid material comprised of slag.

ClariShield® Solvent-Based Natural Look Clear Sealer provides a low-sheen finish that adds depth of color and enhances the appearance of concrete and pavers.

SKAPS WM 3814 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

APCM DA 4092 is modified epoxy pre-impregnated system which can cure at 250°F (121°C) for one hour. DA 4090 | DA 4092 can be supplied on any commercially available glass, Kevlar, or graphite fabric. DA 4090 is a one sided pre-impregnated fabric yielding a single sided tack material. DA 4092 is the same system where both sides of the fabric are pre-impregnated yielding a double sided tack material. Both prepreg systems can be used for laminating and honeycomb sandwich construction.

SKAPS FM 750 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

3B Fiberglass CM 1020 is a non-woven mat made out of E-CR glass filaments, consisting of continuous fibers randomly oriented in multiple layers. The glassfibre is bonded with a silane coupling agent and the layers held together with a suitable binder. The CM 1020 family products contain an insoluble binder compatible with a large range of thermoset matrices like both unfilled or filled unsaturated polyester (UP), vinyl ester (VE), epoxy (EP) and polyurethane (PU) resin systems.The CM 1020 powder mat is ideally suited for polyurethane foaming pro-cesses for the reinforcement of foam panels. The excellent mechanical pro-perties provided by 3B CFM combined with the good opening and the easy expansion of the CM 1020 mat during foam expansion make those reinforced R-PUF panels ideal for applications like thermal insulation of liquefied natural gas carrier and onshore storage.

Stypol® RHPS1221 - pre-promoted unsaturated polyester resin, high performance RTM laminating. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Polynt Group BMC S 1800 Structural is a bulk molding compound based on a blend of different thermoset resins reinforced with glass fibers. This BMC has been developed for structural application. Excellent mechanical properties, mainly impact resistance, and easy molding behavior are combined into the BMC S 1800. BMC S 1800 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Fence Guard™ Stain Concentrate Coco Brown is the leader in wood protection and the makers of seal-once and anchorseal wood protection products. Fence Guard stain concentrate is available in four popular semi-transparent colors: Espresso, Coco Brown, Western Redwood, and Sierra Cedar. This is a water-based alkyd formula which provides penetrating oil finish but with easy water clean-up and ultra-low VOC. Fence Guard dilutes with 2 parts water to 1 part concentrate to produce a cost effective, high-quality penetrating stain for wood fences of all types. Fence Guard offers superior protection against the elements, with fade resistant high quality pigments and long-lasting water repellency.

Pennsealer EE-CT is a single component, waterbased, cationic, coal tar epoxy sealer / coating. Specially designed urethane modified epoxy polyelectrolyte emulsion offers unique interactive technology to this compound, which upon cure, produces a tough, durable and protective coating to the treated surface.

DISTITRON® 152 A1MS - Unsaturated polyester resin in styrene,Isophthalic-Neopentylic. It is used to produce agglomerated and engineered stones,furnitures and sanitary through casting,mix with fillers and/or additives method.

Stypol® AIPY4000 - impact polystyrene shrinkage control additive. For use in SMC and BMC appliations. Main applications areas are building and construction, electronic and electrical, home and domestic applications, industrial sector etc.

D4-220-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

HS 200™ Premium Acrylic Sealer is a premium, high-performance, single-component silane, acrylc sealer designed for concrete or any cement-based product. It is vapor permeable and readily applies outside.

D3-480-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

G-501 Epoxy Non-Skid is a lightweight, non-slip deck covering compound developed for use on aluminum, steel, wood, concrete or polyester. This two-part system meets all the requirements of MIL-D-23003 (Ships) Type H. It is designed for use over Gryphin’s G-249 Primer and G-250 Primer. G-501 Epoxy Non-Skid contains a synthetic resinous binder and abrasive particles. It is easy to apply, economical to use and durable.

TPW 709 - A highly efficient lubricant used when a broad range of composites are in the mix and can be used with or without coupling agents.

RoyalCoat 111 is Gray dual-mesh aluminum oxide floor coating additive.

Polynt Group 57VX have been formulated as barrier coats to reduce osmotic blistering, and as a print blockers, to provide a smoother gelcoat finish. A number benefits have been demonstrated, capitalizing on some of these product’ unique properties.Black color that provides a visual aid to see air bubbles during laminationWhite available for use behind loW-hide colorsless osmoticwater blisteringimproved cosmetics due to reduced fiber print-through & distortionreduced back side tack do not use vinylester barrier coats 57v as a finish coat, as exterior durability is poor, and will result in rapid chalking and fading.

VITROFLEX TRANSPARENT MCA467NN is the acrylic pouring plate with transparent colors that allow vision through.

VITROFLEX TRANSPARENT MCA175NN is the acrylic pouring plate with transparent colors that allow vision through.

This is a continuous filament reinforcing mat designed for flat-sheet epoxy laminate production. It has been treated with a suitable bonding resin and coupling agent and has good handling properties and weight uniformity

DISTITRON® 429 ESX20Q - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce marine,boats,reinforced plastics,general purpose through hand lay up and spray up method.

Polynt Group BMC LP 250/22 RF is a bulk molding compound based on an unsaturated polyester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This BMC has been developed for electrical application. Good mechanical properties and good surface are combined into the BMC RF 1600/20. BMC RF 1600/20 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

SKAPS FM 250 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

This is a family of con�nuous filament reinforcing mats designed for pultrusion processes. They are treated with a suitable bonding resin and coupling agent and have good handling proper�es and good weight uniformity.