Products in Fence, Decks & Rails

AIREX® T90 is a closed-cell, thermoplastic and recyclable polymer foam with excellent fire, smoke & toxicity (FST) properties. It has very good mechanical properties and an extraordinary resistance to fatigue, is chemically stable and has negligible water absorption. It is thermally stable during high temperature processing and post curing. T90 is designed for easy use with all resin systems and processing technologies. AIREX® T90 is the ideal core material for structural sandwich applications requiring high fire resistance.

SIMONA® PE 100 black 10024800 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

D3-110-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

CSM 600 is used in composite materials production as reinforcing filler with unsaturated polyester resins applied.

Anchortech® Advanced Hybrid Sealant Crystal Clear is a fast dry, paintable, hybrid sealant provides excellent adhesion to fiberglass, plastic, wood, aluminum, steel, boat hardware and other substrates. Forms 100% waterproof seal. Stays flexible to withstand joint expansion and contraction caused by weather and temperature fluctuations. It won’t shrink, crack or break down. This product can be applied to wet surfaces and in low temperatures as low as 20°F. It dries fast so it’s rain proof and paint ready in 30 minutes. It is easy gunning, smooth tooling, low odor and VOC compliant. Once cured, the sealant is mold and mildew resistant.

EPOVIA OPTIMUM® KRF 1051 - Novolac Epoxy Resin based vinyl ester in styrene. It is used to produce pipes and tanks through filament winding,hand lay up and spray up,pultrusion method.

Alabama Pigments Company Charcoal Class I is a color hardener which are a pigmented cementitious powder that can be broadcast or dusted onto the surface of freshly placed concrete, to create a dense, abrasion-resistant surface that is permanently colored. Color hardeners can be troweled, broom finished or textured and stamped to create authentic looking stone or patterned textures. The use of color hardeners make it possible to achieve any number of bright or light colors, or any combination of them on gray concrete.

DISTITRON® 100 SV9 - Unsaturated polyester resin in styrene,DCPD. It is used to produce mastics through mix with fillers and/or additives.

D1-240-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

DISTITRON® 110 SXZ - Unsaturated polyester resin in styrene,DCPD. It is used to produce reinforced plastics,general purpose through hand lay up and spray up method.

C.B.Frost & Co. MF775 (FR8775) is a heat cured silicone rubber which cures after the addition of a vulcanising agent (chosen as a function of the production process). FR8775 is available in hardness 75 shore A. The FR8775 is specially designed to manufacture rubber parts for fire resistance applications.

VITROFLEX TRANSPARENT MCZ469NN is the acrylic pouring plate with transparent colors that allow vision through.

Return Polymers RP2008 is 100% recycled PVC pulverized into a 20 mesh powder and blended in large quantities to ensure consistency. Primarily used in fence, window, conduit and siding applications with or without a capstock layer and processed by single and or twin screw extrusion.

NORSODYNE® H 16239 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce pipes and tanks through filament winding,hand lay up and spray up method.

TUFFLEX Solvent Free “TUFF” is a liquid applied Water Cured Urethane (WCU) elastomeric membrane that is used in many of the TUFFLEX Polymers (TUFFLEX) High Performance Coating Systems.

Polynt Group 737-6755 is general purpose RTM resin with rapid cure rate for increased mold turnover; good profile. Main applications areas are aeolian, agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

D1-115-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

Armor WL550 Enhancer Sealer PRO is a solvent-based silicone water repellent sealer that will protect the surface from damage and deterioration caused by water absorption, and enhance it with a matte wet look finish. The WL550 Enhance Sealer PRO works entirely below the surface and will not leave behind a visible surface film. The WL550 is designed specifically for unsealed concrete, brick, pavers, and natural stone where a color enhancement is desired.

Polynt Group 57VX have been formulated as barrier coats to reduce osmotic blistering, and as a print blockers, to provide a smoother gelcoat finish. A number benefits have been demonstrated, capitalizing on some of these product’ unique properties.Black color that provides a visual aid to see air bubbles during laminationWhite available for use behind loW-hide colorsless osmoticwater blisteringimproved cosmetics due to reduced fiber print-through & distortionreduced back side tack do not use vinylester barrier coats 57v as a finish coat, as exterior durability is poor, and will result in rapid chalking and fading.

This is a continuous filament reinforcing mat designed for flat-sheet epoxy laminate production. It has been treated with a suitable bonding resin and coupling agent and has good handling properties and weight uniformity

HS 200™ Premium Acrylic Sealer is a premium, high-performance, single-component silane, acrylc sealer designed for concrete or any cement-based product. It is vapor permeable and readily applies outside.

Pennsealer EE-CT is a single component, waterbased, cationic, coal tar epoxy sealer / coating. Specially designed urethane modified epoxy polyelectrolyte emulsion offers unique interactive technology to this compound, which upon cure, produces a tough, durable and protective coating to the treated surface.

VITROFLEX TRANSPARENT MCA467NN is the acrylic pouring plate with transparent colors that allow vision through.

VITROFLEX TRANSPARENT MCA175NN is the acrylic pouring plate with transparent colors that allow vision through.

PanTINT® 73 are pigment dispersions for industrial solvent based epoxy coatings. They consist of industrial quality organic and inorganic pigments finely milled in Bisphenol A carrier resin. The pigments chosen for the PanTINT 73 exhibit color strength, durability, chemical resistance and light fastness. Most are suitable for interior and exterior applications. The epoxy carrier resin along with a proprietary additive package allow for high pigment solids and superior compatibility with a number of epoxy based systems. The 73 series’ will be compatible with a wide range of epoxy resin formulations for industrial, maintenance and architectural coating applications.

Cor-Ban® 35 Undyed is a long lasting, high solids, high penetration, and water displacing CIC.

Polynt Group HUP 16/40 RN-Color is generally used in building and construction, foundries, peroxides applications.

SKAPS LDB 3500 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

Anchortech® UV Resistant Adhesive Sealant is a fast dry, paintable, UV resistant adhesive sealant provides excellent permanent adhesion to fiberglass, plastic, wood, teak, aluminum, steel, boat hardware and other substrates. Forms 100% waterproof seal. Stays flexible to withstand joint expansion and contraction caused by weather and temperature fluctuations. It won’t shrink, crack, yellow, crumble or break down. This product can be applied to wet surfaces and in low temperatures. It dries fast so it’s rain and paint ready in one hour. It guns out easily, tools smoothly, low in odor and VOC compliant. When cured, this product is mold and mildew resistant.

This veil is a very conformable continuous glass fiber surfacing veil comprised of highly uniform, randomly distributed filaments bonded with special formulated resins. The veil provides excellent surface appearance on glass reinforced plastic composite parts and also has outstanding corrosion resistance properties. This veil is available for purchase in LAYER-PAK® format.

Polynt Group SMC 3500 Duralynt is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. This material has been developed to show a high weathering resistance. SMC 3500 Duralynt joints good mechanical properties and good flow SMC 3500 Duralynt is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Composites’ ArmorFlex® 953 Series gel coats are high performance products formulated for the fiberglass industry. They are primarily formulated for marine and sanitary applications,but should be used in any application where water and chemical resistance are needed. ArmorFlex® 953 Series also have exceptional gloss and buffing characteristics. While offering these benefits,the ArmorFlex® 953 Series gel coats have retained the important construction application qualities expected from Polynt Composites gel coats,such as resistance to porosity,tearing,and color separation; sag resistance; consistent liquid properties; excellent patchability; and more. These all add up to higher quality appeal in FRP parts made from Polynt’s ArmorFlex® HIGH GLOSS BUFFBACK® gel coats. ArmorFlex® 953 Series gel coats have enabled customers to meet and surpass all requirements of the American National Standard for plastic bathtubs,shower receptors and shower stalls,ANSI Z124.1,.2 and .3 –1995,Sec. 6.1.1. Gel coats in the 953 Series require only the addition of the proper amount of the appropriate methyl ethyl ketone peroxide to cure. ArmorFlex® HIGH GLOSS BUFFBACK® gel coats are available in the same wide range of colors as other POLYCOR® gel coats. Refer to Polynt’s POLYCOR® Color Card for color selection. Standard base white ArmorFlex® is 953WJ340.

C-TAPE™ U1000P 24K HS FT* is a unidirectional carbon fiber tape with a continuous weft, with a total weight of 1006 gsm. It is made using 24K HS carbon fiber. The binding provided by the weft, along with the addition of fine warp threads, ensures the regularity of the product’s appearance; This carbon tape is used primarily for local reinforcement with epoxy resin. * FOE fiber available upon request

This is a family of con�nuous filament reinforcing mats designed for pultrusion processes. They are treated with a suitable bonding resin and coupling agent and have good handling proper�es and good weight uniformity.

D1-480-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

SKAPS FM 250 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins