Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts

Cor-Ban® 35 Undyed

Cor-Ban® 35 Undyed is a long lasting, high solids, high penetration, and water displacing CIC.

Brand: Cor-Ban (16 products)

Product Type: Solventless & High Solids Coating

Features: Corrosion Resistant, Crack Resistant, Detectable, Fast Drying, Good Sagging Resistance, High Capacity of Penetration, High Solids Content, Low Toxicity, Low VOC, Service Life Extension, Thixotropic

Application Method: Spray

Technical Data Sheet

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Product Type
Solventless & High Solids Coating
Technologies
Ready-to-Use Products
Product Families
Ready-to-Use Products — Paints & Coatings
Protective Coatings

Features & Benefits

Labeling Claims
Heavy Metal-free,
Low VOC
Ready-to-Use Product Features
Corrosion Resistant,
Crack Resistant,
Detectable,
Fast Drying,
Good Sagging Resistance,
High Capacity of Penetration,
High Solids Content,
Low Toxicity,
Low VOC,
Service Life Extension,
Thixotropic
Features
  • A long lasting, high solids, low volatiles, high penetration, and water displacing corrosion inhibiting compound.
Key Benefits
  • Thin, non-tacky film with a fast dry time
  • Low VOC
  • Free of chromates
  • Free from heavy metals
  • Low toxicity
  • Non-sagging thixotropic film
  • Solvent removable
  • Very low dry film weight < 1 mil (25 microns) required to surpass specification
  • Non-cracking and flaking to -40°F (-40°C)
  • High solids > 51%
  • 2000 hours of salt spray
  • Offers long lasting corrosion inhibition properties
  • Offers long lasting corrosion inhibition properties

Applications & Uses

Markets
Building & Construction
Applications
Building & Construction — Building Envelope & Roofing
Architectural Coatings
Building & Construction — Building Materials
Fence, Decks & Rails
Application Method
Spray
Applications
  • Use on high profile aircraft substrates, such as upper edge floor beams, wheel wells, pressure deck, and center wing sections
  • Apply by using conventional airless, aerosol, or air-operated spray equipment
  • Apply at 1 - 1½ mils (25-38 microns) wet thickness. This wet thickness can be measured with Zip-Chem® ’s Wet Film Thickness Gage.
  • The Cor-Ban® 35 Undyed aerosol can be used in conjunction with the Formit® extentions to provide targeted spray to areas that are difficult to reach but need to be coated.
  • All properties represented were achieved with a dry film thickness of 0.5 - 0.75 mils (12-19 microns)
  • One aerosol can covers approximately 95 ft² (8.8 m²)
  • Cured Zip-Chem® Cor-Ban® 35 Undyed can be removed with Sur-Prep® 3160, D-5640NS, Zip-Strip™ 125M, Sur-Prep® 3167, or mineral spirits

Properties

Physical Properties
ValueUnitsTest Method / Conditions
Compatibility Cd, Mg, AIPass--
Drying Timemax. 1hours-
Exfoliation (-65°F)Pass--
Flash Point115.0°F-
Low Temp FlakingPass--
Material VOC395.0g/L-
Non-Volatile Contentmin. 51%-
Penetration (BMS 3-23G)Pass-BMS 3-23G
Solvent TypeAliphatic--
Specific Gravity0.9--
Water DisplacementNo Rust--

Regulatory & Compliance

Specifications
  • CSNP038 Type IV B Class 2 (QPL)
  • MIL-DTL-85054D (QPL)
  • NSN: 8030-01-615-4738 (Undyed) 8 oz. (227 g) Brush In Cap (QPL)
  • NSN: 8030-01-615-4749 (Undyed) (QPL)
  • NSN 8030-01-516-6254 (Undyed) (16 fl oz (473 ml)) Aerosol (QPL))
  • NSN: 8030-01-615-4751 (Undyed) Gallon (3.8L) (QPL)
  • NSN 8030-01-531-7364 (Undyed) 5 Gallons (18.9L) (QPL)
  • NSN: 8030-01-531-7362 (Undyed) Quart (946 ml) (QPL)

Packaging & Availability

Packaging Type
Cans,
Drums,
Pails
Available Pack sizes
  • Case of 12 of 16 fl oz (473 ml) aerosols-006710
  • Case of 12 each quart (946 ml)-101482
  • 8 oz (227 g) brush in cap-101477
  • Case of 4 each gallon (4 each of 3.8L) cans-009410
  • 5 Gallon (18.9 L) pail-006708
  • 55 Gallon (208 L) dum-006709
  • Special packaging upon request