Products in Fence, Decks & Rails

DISTITRON® 152 A1MS - Unsaturated polyester resin in styrene,Isophthalic-Neopentylic. It is used to produce agglomerated and engineered stones,furnitures and sanitary through casting,mix with fillers and/or additives method.

3B Fiberglass CM 1020 is a non-woven mat made out of E-CR glass filaments, consisting of continuous fibers randomly oriented in multiple layers. The glassfibre is bonded with a silane coupling agent and the layers held together with a suitable binder. The CM 1020 family products contain an insoluble binder compatible with a large range of thermoset matrices like both unfilled or filled unsaturated polyester (UP), vinyl ester (VE), epoxy (EP) and polyurethane (PU) resin systems.The CM 1020 powder mat is ideally suited for polyurethane foaming pro-cesses for the reinforcement of foam panels. The excellent mechanical pro-perties provided by 3B CFM combined with the good opening and the easy expansion of the CM 1020 mat during foam expansion make those reinforced R-PUF panels ideal for applications like thermal insulation of liquefied natural gas carrier and onshore storage.

Stypol® RHPS1221 - pre-promoted unsaturated polyester resin, high performance RTM laminating. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Devinyl 950 TG 2 is a high-quality filled fire retardant, pre-accelerated, brominated epoxy vinyl ester resin. It is designed for hand lay up molding as well as for spray application, RTM-technologies, pultrusion.

DISTITRON® 518 A - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating method.

Cor-Ban® 23 Enhanced Dye offers the fast dry time and thin film as well as inhibition.

PanTINT® 73 are pigment dispersions for industrial solvent based epoxy coatings. They consist of industrial quality organic and inorganic pigments finely milled in Bisphenol A carrier resin. The pigments chosen for the PanTINT 73 exhibit color strength, durability, chemical resistance and light fastness. Most are suitable for interior and exterior applications. The epoxy carrier resin along with a proprietary additive package allow for high pigment solids and superior compatibility with a number of epoxy based systems. The 73 series’ will be compatible with a wide range of epoxy resin formulations for industrial, maintenance and architectural coating applications.

R-E-D Fume Concrete - 102 DM is a densified, constant pH, amorphous light gray silicon dioxide powder, obtained by filtering the dusts extracted from the production of silicon metal in an electric arc furnace. R-E-D Fume Concrete 102 DM is used to make high performance concrete. Silica fume is one of the more important advanced materials necessary in the effort to rebuild our nation's infrastructure. Silica fume delivers increased toughness and resistance to abrasion and corrosion, improving sustainability and life-cycle cost efficiencies.

Polydyne® 5056 is used for general purpose and gel coat formulation. Main applications areas are composites, eyewear and jewelers, textile industry etc.

PanTINT® 73 are pigment dispersions for industrial solvent based epoxy coatings. They consist of industrial quality organic and inorganic pigments finely milled in Bisphenol A carrier resin. The pigments chosen for the PanTINT 73 exhibit color strength, durability, chemical resistance and light fastness. Most are suitable for interior and exterior applications. The epoxy carrier resin along with a proprietary additive package allow for high pigment solids and superior compatibility with a number of epoxy based systems. The 73 series’ will be compatible with a wide range of epoxy resin formulations for industrial, maintenance and architectural coating applications.

EPOVIA RF-2000SEM is Brominated vinyl ester resin for hand lay up-filament winding and it is generally used in Building and Construction,Chemical Industry,Industrial sector,Railway Sector applicatons

Polynt Group 50, 50X - easy to sand and polish; excellent resistance to yellowing and fading due to sun exposure; resistance to thermal change and weathering; higher gloss recovery when polishing back aged or from lower gloss mold; excellent blister resistance. Main applications areas are building and construction, composites etc.

NORSODYNE® H 13157 TAE - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce furnitures and sanitary through hand lay up and spray up method.

PanTINT® 70 and 72 Series are concentrated pigment dispersions in a plasticizer base. Compatible with a wide range of polyvinyl chloride (PVC) resin formulations for thermoplastic applications. The Pigments chosen for the 70 and 72 Series exhibit color brilliance, strength, chemical and UV resistance and lightfastness. Most are suitable for interior and exterior applications. The 70 Series are pigments dispersed in a monomeric pthalate plasticizer while the 72 Series are dispersed in pthalate compliant plasticizer.

Polynt Group 781-6010 - toughened vinyl ester resinthat offers improved fracture toughness and crack resistance; unpromoted. Main applications areas are aeolian, aeronautical, agrochemical, agrobusiness, automotive, building and construction, composites, consumer products, home and domestic applications, industrial sector, marine, mass transports, mold manufacture railway sector etc.

Polycor® 99C Colors pigmented gel coats formulated for the casting industry MACT compliant resistant to water and certain chemicals provides durability and reduced maintenance. Main applications areas are building and construction, composites, marine etc.

Alabama Pigments Company Sun Buff Class Ii is a color hardener which are a pigmented cementitious powder that can be broadcast or dusted onto the surface of freshly placed concrete, to create a dense, abrasion-resistant surface that is permanently colored. Color hardeners can be troweled, broom finished or textured and stamped to create authentic looking stone or patterned textures. The use of color hardeners make it possible to achieve any number of bright or light colors, or any combination of them on gray concrete.

ENYDYNE® H 66126 TAE - Unsaturated polyester resin in styrene,DCPD. It is used to produce pipes and tanks through hand lay up and spray up method.

Anchortech® Advanced Hybrid Sealant White is a fast dry, paintable, hybrid sealant provides excellent adhesion to fiberglass, plastic, wood, aluminum, steel, boat hardware and other substrates. Forms 100% waterproof seal. Stays flexible to withstand joint expansion and contraction caused by weather and temperature fluctuations. It won’t shrink, crack or break down. This product can be applied to wet surfaces and in low temperatures as low as 20°F. It dries fast so it’s rain proof and paint ready in 30 minutes. It is easy gunning, smooth tooling, low odor and VOC compliant. Once cured, the sealant is mold and mildew resistant.

Polynt Group HUP 10/30 RN-Color is generally used in building and construction applications.

Alabama Pigments Company Medium Gray Class I is a color hardener which are a pigmented cementitious powder that can be broadcast or dusted onto the surface of freshly placed concrete, to create a dense, abrasion-resistant surface that is permanently colored. Color hardeners can be troweled, broom finished or textured and stamped to create authentic looking stone or patterned textures. The use of color hardeners make it possible to achieve any number of bright or light colors, or any combination of them on gray concrete.

SKAPS LDB 3500 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

PanTINT® 73 are pigment dispersions for industrial solvent based epoxy coatings. They consist of industrial quality organic and inorganic pigments finely milled in Bisphenol A carrier resin. The pigments chosen for the PanTINT 73 exhibit color strength, durability, chemical resistance and light fastness. Most are suitable for interior and exterior applications. The epoxy carrier resin along with a proprietary additive package allow for high pigment solids and superior compatibility with a number of epoxy based systems. The 73 series’ will be compatible with a wide range of epoxy resin formulations for industrial, maintenance and architectural coating applications.

Iso-Flex® 200 Overlay System is a flexible two-component epoxy resin system developed for use on concrete surfaces requiring a traffic bearing surface that is a slip-resistant overlay.

RichardsApex LW-X3 CPD is a water emulsifiable, liquid lubricant formulated for use in the manufacturing of chain link fence that may be plastic coated, zinc plated or remain as bare metal. LW-X3 is composed of polar and extreme pressure additives in a synthetic emulsification system.

Polynt Group HUP 16/40 RN-Color is generally used in building and construction, foundries, peroxides applications.

IKAMOD 105 is a special grafted copolymer designed to improve the mechanical properties of opaque rigid PVC, suitable for both indoor and outdoor applications. Compared to standard CPE and acrylic impact modifiers, it imparts much higher elongation at break and excellent toughness whilst maintaining outstanding impact resistance.

Cor-Ban® 35 Undyed is a long lasting, high solids, high penetration, and water displacing CIC.

Northern Industries NI-21 100% Epoxy is an odorless two component coating designed to resist high wear and harsh chemicals when applied to floors and walls. Its high gloss finish and self-leveling characteristic make it excellent for high build applications. When the two components are combined, a conversion from a liquid epoxy to a thermoset solid occurs. The result is a highly durable finish that is easy to clean.

Nox-Crete Tri-Shield is a solvent-based, transparent, glossy, acrylic polymer and silane type combination membrane cure, water repellent sealer and decorative sealer for fresh, new or existing horizontal exterior concrete surfaces.

DISTITRON® 506 V5 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce agglomerated and engineered stones through casting method.

Polydyne® 6120 is general purpose, preaccelerated, thixotropic with low reactivity. And it is generally used in composites applicatons.

EASYLAM® LSE - Unsaturated polyester resin in styrene,special. It is used as general purpose in hand lay up and spray up method.

NORSODYNE® H 73233 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce flexibilise rigid resins.

DISTITRON® 427 AN2 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce furnitures and sanitary through casting,mix with fillers and/or additives method.