Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
- A long lasting, high penetration, and water displacing corrosion inhibiting compound
- Has a stronger dye than regular Cor-Ban® 23
- May be used in the place of Airbus CML 15-006.
- Key Benefits
- Free of chromates
- Free from heavy metals
- Low toxicity
- Offers inhibition and a thin film
- Water displacing
- Very low dry film weight <0.3 mil (8 microns) required to surpass specification
- Non-cracking and non-flaking to -65°F (-54°C)
- Non-sagging, fast drying, non-tacky, and detectable film
- Solvent removable
- Strong dye allows for easy visual detection
- > 3000 Hours salt spray
Applications & Uses
- Markets
- Applications
- Application Method
- Applications
- Apply by conventional airless, air-operated spray equipment, or by aerosol.
- Use on high profile aircraft substrates, upper edge floor beams, wheel wells, pressure deck, and center wing sections.
- The Cor-Ban® 23 Enhanced Dye aerosol can be used in conjunction with the Formit® extensions to provide targeted spray to areas that may be difficult to reach but need to be coated.
- All properties represented were achieved with a dry film thickness of range 0.3 - 0.5 mils (7-12 microns).
- The wet film will self level to achieve the desired dry film thickness when applied to an inclined surface.
- One aerosol can covers approximately 160 ft² (14.9 m²) and one gallon (3.8L) of bulk material covers approximately 2290 ft² (56.2 m²/liter).
Properties
- Physical Properties
Value Units Test Method / Conditions Drying Time max. 1 hours - Exfoliation (-65°F) Pass - - Flash Point 114.0 °F - Low Temp Flaking Pass - - Non-Volatile Content 42.0 % - Operating Temperature -65 - 350 °F - Penetration (Per hours per BMS 3-35) min. 4 inch BMS 3-35 Salt Spray Protection (On aluminum) min. 3000 hours - Specific Gravity 0.88 - - Viscosity 35-40 cps - Water Displacement No Rust - -
Regulatory & Compliance
- Specifications
- AIMS 09-08-001 Type I Grade 3
- BAMS 565-006 Type V
- BMS 3-23J Type II Class 2 Grade A & B (QPL)
- BMS 3-35
- Fed-Ex E.O. 9-5100-7-5001
Packaging & Availability
- Packaging Type
- Available Pack sizes
- Case of 12 of 16 fl oz (473 ml) aerosols-011321
- 5 Gallon (18.9L) pail-011209
- Special packaging upon request