Products in Fence, Decks & Rails

EPOVIA RF-2050SE is Chlorendic anhydride (HET acid) based unsaturated polyester resin. Main Applications areas are Building and Construction,Chemical Industry,Industrial sector etc.

Fence Guard™ Stain Concentrate Coco Brown is the leader in wood protection and the makers of seal-once and anchorseal wood protection products. Fence Guard stain concentrate is available in four popular semi-transparent colors: Espresso, Coco Brown, Western Redwood, and Sierra Cedar. This is a water-based alkyd formula which provides penetrating oil finish but with easy water clean-up and ultra-low VOC. Fence Guard dilutes with 2 parts water to 1 part concentrate to produce a cost effective, high-quality penetrating stain for wood fences of all types. Fence Guard offers superior protection against the elements, with fade resistant high quality pigments and long-lasting water repellency.

Armor WL550 Enhancer Sealer PRO is a solvent-based silicone water repellent sealer that will protect the surface from damage and deterioration caused by water absorption, and enhance it with a matte wet look finish. The WL550 Enhance Sealer PRO works entirely below the surface and will not leave behind a visible surface film. The WL550 is designed specifically for unsealed concrete, brick, pavers, and natural stone where a color enhancement is desired.

NORSODYNE® H 13212 TAE - Unsaturated polyester resin in styrene,Orthophthalic. It is used as general purpose in hand lay up and spray up method.

D1-073-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

Norsodyne® 3600BNP - high filler loading, non-promoted and non-waxed. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Polynt Group SMC 4200 R23 is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. This SMC has been developed for sink and tray application. SMC 4200 R23 joints good mechanical properties with stain and chemical resistance. SMC 4200 R23 has been studied to show a uniform pigmentation on the part molded. SMC 4200 R23 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Norsodyne® CMI15100W - modified with mma and UV absorber contained resin for solid surface, good scratch and weathering resistance. Main applications areas are building and construction, industrial sector etc.

DISTITRON® 429 ESX20Q - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce marine,boats,reinforced plastics,general purpose through hand lay up and spray up method.

APCM DA 4092 is modified epoxy pre-impregnated system which can cure at 250°F (121°C) for one hour. DA 4090 | DA 4092 can be supplied on any commercially available glass, Kevlar, or graphite fabric. DA 4090 is a one sided pre-impregnated fabric yielding a single sided tack material. DA 4092 is the same system where both sides of the fabric are pre-impregnated yielding a double sided tack material. Both prepreg systems can be used for laminating and honeycomb sandwich construction.

SKAPS WM 3814 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

Stypol® AIPY4000 - impact polystyrene shrinkage control additive. For use in SMC and BMC appliations. Main applications areas are building and construction, electronic and electrical, home and domestic applications, industrial sector etc.

RoyalCoat 111 is Gray dual-mesh aluminum oxide floor coating additive.

G-501 Epoxy Non-Skid is a lightweight, non-slip deck covering compound developed for use on aluminum, steel, wood, concrete or polyester. This two-part system meets all the requirements of MIL-D-23003 (Ships) Type H. It is designed for use over Gryphin’s G-249 Primer and G-250 Primer. G-501 Epoxy Non-Skid contains a synthetic resinous binder and abrasive particles. It is easy to apply, economical to use and durable.

TPW 709 - A highly efficient lubricant used when a broad range of composites are in the mix and can be used with or without coupling agents.

Polynt Group BMC LP 250/22 RF is a bulk molding compound based on an unsaturated polyester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This BMC has been developed for electrical application. Good mechanical properties and good surface are combined into the BMC RF 1600/20. BMC RF 1600/20 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

ClariShield® Solvent-Based Natural Look Clear Sealer provides a low-sheen finish that adds depth of color and enhances the appearance of concrete and pavers.

This reinforcing mat is a continuous-filament product, which is treated with a suitable bonding resin and coupling agent. It has good handling properties, resists wash in the mold, has good porosity, fast wet through, exceptionally good formability, weight uniformity, and uniform strand integrity.

NORSODYNE® H 84233 L - Unsaturated polyester resin in styrene,halogenated. It is used to produce building panels,parts with high resistance to fire through hand lay up and spray up,continuous laminating method.

Polynt Group 781-2140 - vinyl ester infusion resin, unpromoted with a high HDT with blister and corrosion resistance; when formulated as recommended, meets the requirements of FDA title 21 CFR 177.2420. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, chemical industry, composites, food contact, industrial sector, marine, mass transports, paper industry etc.

Norsodyne® 3338 has general purpose, good water resistance, promoted and non-waxed. Main applications areas are automotive, building and construction, industrial sector, marine etc.

DISTITRON® VE 370 SC - Bisphenol-A Epoxy Resin based vinyl ester in styrene. It is used to produce marine,boats through vacuum infusion method.

Stain Blocking Primer is an exterior high performance, durable, low VOC primer. Designed as a stain-blocking sealer to minimize the “bleed through” of wood tannins and common household stains. Stain-Blocking Primer bonds to wood with resins that protect against the elements reducing damage by water and ultraviolet light degradation.

US SPEC FS Grout is a blend of specialty cements, admixtures and proprietary aggregates. FS Grout is designed for grouting, anchoring and supporting in applications that require a short turnaround time. FS Grout may be utilized for cold weather placement. It is non-shrink, non-metallic and contains no added chlorides.

ENYDYNE® H 61104 TAPF - Unsaturated polyester resin in styrene,DCPD. It is used to produce furnitures and sanitary through hand lay up and spray up method.

APCM DA 409U/S2-glass is a tough, versatile, modified epoxy resin prepreg that cures at 250ºF. The S-2 glass is a Zentron High Strength fiber. Standard weight is 260g/m2 with a 38% resin content. Other weights and resin contents available upon request.

GacoDeck® TopCoat DT49-1 protects deck surfaces, including balconies, patios, roof decks, ramps and elevated walkways. Apply TopCoat over plywood, concrete, metal, fiberglass and previously coated deck systems. GacoDeck® TopCoat is a water-borne, single component elastomeric coating that incorporates ADA-compliant granules for added slip and wears resistance. The coating is designed to create a fully adhered, durable waterproof membrane that expands and contracts along with the substrate.

SIMONA® PE 100 black 10024801 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

GEHR PMMA XT® (ACRYL) is amorphous material belongs to the polymer group of standard plastics, due to its thermal and mechanical properties. In addition to its high mechanical strength and rigidity, it certainly has an extraordinarily brilliant transparency. Its weather and UV resistance as well as its surface hardness are also very high. PMMA is also scratch-resistant and polishable. The continuous operating temperature ranges between -40 °C and +70 °C. The chemical resistance to most solvents, the resistance to stress cracking as well as the toughness is clearly subordinate compared to other materials from the group of standard polymers.

Polynt Group SMC 4900 AM is generally used in furniture, home and domestic applications applications.

DISTITRON® 100 SW - Unsaturated polyester resin in styrene,DCPD. It is used to produce furnitures and sanitary through casting,mix with fillers and/or additives method.

Fence Guard™ Stain Concentrate Sierra Cedar is the leader in wood protection and the makers of seal-once and anchorseal wood protection products. Fence Guard stain concentrate is available in four popular semi-transparent colors: Espresso, Coco Brown, Western Redwood, and Sierra Cedar. This is a water-based alkyd formula which provides penetrating oil finish but with easy water clean-up and ultra-low VOC. Fence Guard dilutes with 2 parts water to 1 part concentrate to produce a cost effective, high-quality penetrating stain for wood fences of all types. Fence Guard offers superior protection against the elements, with fade resistant high quality pigments and long-lasting water repellency.

Polynt Group 222X is clear and transparent for granite applications. It is generally used in composites applicatons.

NORSODYNE® H 32433 TA - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce marine,boats through hand lay up and spray up method.

Shandong Donglin New Materials Acrylic impact modifier DL-50 developed by our company is an acrylic polymer with a core-shell structure. Its main function is to improve the impact strength and weather resistance of the final PVC product as an impact modifier. It is mainly used to produce PVC products with high requirements for impact resistance and weather resistance, such as PVC profiles, PVC fences, PVC exterior wall hanging boards and other products.DL-50 is our company’s latest generation of acrylic impact modifiers. Compared with other acrylic impact modifiers, our DL-50 has higher impact strength because of our DL The glue content of -50 product is very high. At the same time, our DL-50 has good fluidity and will not agglomerate in long-term storage.