Products in Fence, Decks & Rails

SWANCOR 2554-N is a hot-melt epoxy resin, no Diuron and volatile ingredients in the formula. It is halogen-free flame retardant products, passed EN45545-2 HL2 flame retardant test, also has features such has light weight, excellent mechanical strength, heat resistance and corrosion resistance.

VITROFLEX TRANSPARENT MCA261NN is the acrylic pouring plate with transparent colors that allow vision through.

NORSODYNE® C 13133 L - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce agglomerated and engineered stones through casting method.

Armorflex® 953 SP is flexible NPG with added crack resistance and excellent UV properties. Good resistance to water and osmotic blistering. Low back side tack and easy to spray. Main applications areas are building and construction, home and domestic applications etc.

VITROFLEX OPAQUE N135AN is the colored methacrylate casting plate that does not let light through.

D4-200-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

AIREX® R82 is a closed-cell, thermoplastic polymer foam that combines outstanding fire resistance with very low smoke and toxicity, along with excellent dielectric properties. It has an outstanding strength to weight ratio, very low moisture absorption, is thermoformable and ductile. AIREX® R82 is an exceptional core material for use in structural lightweight applications that demand high fire resistance, radar transparency or operation in extremely hot or cold environments

WET!™ Color Enhancer & Sealer has excellent resistance to abrasion and chemicals, including salt. The penetrating nano particles of ICT WET! (157) Allows the product to soak into the surfaces of porous substrates, such as brick pavers, to stabilize joints and loose sand within, while also enhancing the color of the surface being sealed. ICT WET! (157) Is non-yellowing, once cured, and will form a very hard protective coating for brick pavers, porous concrete & masonry surfaces. The durability and resistance to chemicals and salt of ICT WET! (157) makes it great for application on sidewalks, pool decks, and driveways. Exterior use only.

DISTITRON® 510 V5 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce flat sheets,laminates,transparent and corrugated sheets through continuous laminating method.

NORSODYNE® C 16237 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce abrasives,chips through casting method.

Polydyne® 5062P - preaccelerated, high transparency, flexible, low shrinkage. Main applications areas are composites, eyewear and jewelers, textile industry etc.

POLIBRID® 705 is a tough, flexible and resilient elastomer used as a protective coating or lining for concrete, steel and other surfaces. It is a top-of-the-line product with a versatile and consistently successful track-record in critical applications for nearly every industry.

Norsodyne® 2112 - thixotropic, promoted and waxed, lloyd's approved.

SKAPS L 1800 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

Wesco Refractories Thermo Gate Mortar is a volume stable, high alumina, phos-bonded mortar designed particularly for slide gates.

Polynt Group 25 series gelcoats are formulated from premium polyester resins and fire retardant additives to achieve optimal fire retardancy properties and low slow smoke development. They are suitable for applications requiring a surface with resistance to flame spread and smoke development.

DISTITRON® 412 SV2 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce windmill blades,reinforced plastics,general purpose through injection molding,rtm method.

URS 1560 is a clear, one-component, non-yellowing urethane coating that can be applied directly to surfaces as a sealer / surfacer in single or multiple coat applications. URS 1560 is recommended for applications requiring high abrasion and chemical resistance, such as floor and deck coating, masonry sealer, and so on.

DNS 166 is a multi-component, chloride-free, water-reducing accelerator for concrete. It promotes higher early and ultimate strengths, as it can be used year-round, even with temperatures below freezing. Concrete using DNS 166, which is placed in colder weather, maintains normal setting times without the introduction of chloride-bearing components. DNS 166 is especially effective to use in prestressed concrete repair, prestressed concrete, concrete bridge decks, pre-cast, site-cast and all steel-reinforced concrete, concrete over metal decking and roof systems, and concrete subject to 20°F temperatures.

DISTITRON® 1402 AN2V3 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce pipes and tanks through filament winding method.

Polynt Group 737-8298 is general purpose RTM and infusion for slower cure rate and good profile; higher hdt; good hydrolytic stability. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

DISTITRON® 183 CS - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce isothermal sandwich panels through press and vacuum molding method.

A high build, surface-tolerant, semi-gloss epoxy coating formulated for excellent resistance to corrosive and abrasive environments. This product is available in a wide range of attractive colors and is formulated for excellent adhesion to clean steel, rusted steel, weathered galvanized steel, wood, concrete, and most existing cured coatings. This product meets the requirements of ANSI/AWWA D102- 06 OCS-5 for first coat and intermediate coat and OCS-6 intermediate coat. Complies with U. S. EPA Ozone Transport Commission (OTC) for Volatile Organic Compounds for VOC Emission Standards for industrial maintenance coatings.

Barvy A Laky Lazurol Window Email U2015 is a synthetic urethane enamel. It is a dispersion of inorganic and organic pigments in urethane alkyd solution in organic solvents with additives and UV stabilizers.

Anchor Paint Manufacturing Anco Rust Inhibitive Primers, Hi-Solids 1622 is a low VOC, high solids, penetrating oil/alkyd rust inhibitive primer.

Polynt Group SUP 6000-1001 1210 is a bulk molding compound based on an unsaturated polyester resin, fire retardant grade, reinforced with glass fibers. This BMC has been developed for façade panels. Sup 6000-1001 1210 joints excellent fire protection grade and high weathering resistance sup 6000-1001 1210 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

LINSEED OIL TREATMENT is a blend of boiled linseed oil and solvents. When applied in a thin coating to concrete surfaces, it protects them from winter damage due to freeze-thaw cycling and the effects of de-icing salts. Two applications of the oil compound will protect concrete and increase its resistance to winter damage.

ZOLTEK PX35 Stitch-Bonded Uni-Directional Carbon Fabrics are produced from our ZOLTEK PX35 50K Continuous Tow Carbon Fiber. Unique fiber spreading techniques are utilized to obtain a wide range of UD fabric weights for a varied set of composite part applications. Quick composite part build-up is cost effectively achieved with our diverse weight range of low-cost carbon fabric products.

Polynt Group 10 - Dispersion of high quality pigments in a monomer-free reactive polyester grinding vehicle

EPOVIA OPTIMUM® RF 5000 UV - Urethane Epoxy Resin based vinyl ester in styrene. It is used to produce relining,cipp,pipes and tanks.

Norsodyne® 2625NP - non-promoted and non-waxed, high cross-linked resin, high hdt, excellent chemical resistance. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Norsodyne® 3210W - modified with mma and UV absorber contained resin for solid surface, good scratch and weathering resistance. Main applications areas are building and construction, industrial sector etc.

Stypol® ACPW4000 is crystalline polystyrene shrinkage control additive. For use in SMC and BMC appliations. Excellent pigmentation for a wide range of colors. Main applications areas are building and construction, electronic and electrical, home and domestic applications, industrial sector etc.

International Recycling Plastic Film - LDPE Film 90/10 is a clean plastic made from low density polyethylene.Its comprising of 90% clear film and 10% colored film.

NORSODYNE® R 26391 T - Unsaturated polyester resin in styrene,Ortophthalic-Neopentylic. It is used to produce relining,cipp,pipes and tanks.

Epovia Optimum® KRF-1051 - novolac epoxy vinyl ester resin, chemical and heat resistance, low color, low foaming, fast cure. Main applications areas are building and construction, chemical industry, industrial sector etc.