Products in Fence, Decks & Rails

Polynt Group HUP 10/30 RN-Color is generally used in building and construction applications.

DISTITRON® 506 V5 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce agglomerated and engineered stones through casting method.

DISTITRON® 427 AN2 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce furnitures and sanitary through casting,mix with fillers and/or additives method.

DISTITRON® 152 A1MS - Unsaturated polyester resin in styrene,Isophthalic-Neopentylic. It is used to produce agglomerated and engineered stones,furnitures and sanitary through casting,mix with fillers and/or additives method.

Polynt Group 737-6755 is general purpose RTM resin with rapid cure rate for increased mold turnover; good profile. Main applications areas are aeolian, agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

TUFFLEX Solvent Free “TUFF” is a liquid applied Water Cured Urethane (WCU) elastomeric membrane that is used in many of the TUFFLEX Polymers (TUFFLEX) High Performance Coating Systems.

NORSODYNE® H 16239 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce pipes and tanks through filament winding,hand lay up and spray up method.

DISTITRON® 615 V4 - Unsaturated polyester resin in styrene,special. It is used to produce production of gelcoat through mix with fillers and/or additives.

D3-110-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

Anchortech® Advanced Hybrid Sealant Crystal Clear is a fast dry, paintable, hybrid sealant provides excellent adhesion to fiberglass, plastic, wood, aluminum, steel, boat hardware and other substrates. Forms 100% waterproof seal. Stays flexible to withstand joint expansion and contraction caused by weather and temperature fluctuations. It won’t shrink, crack or break down. This product can be applied to wet surfaces and in low temperatures as low as 20°F. It dries fast so it’s rain proof and paint ready in 30 minutes. It is easy gunning, smooth tooling, low odor and VOC compliant. Once cured, the sealant is mold and mildew resistant.

SIMONA® PE 100 black 10024800 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

EPOVIA OPTIMUM® KRF 1051 - Novolac Epoxy Resin based vinyl ester in styrene. It is used to produce pipes and tanks through filament winding,hand lay up and spray up,pultrusion method.

Alabama Pigments Company Charcoal Class I is a color hardener which are a pigmented cementitious powder that can be broadcast or dusted onto the surface of freshly placed concrete, to create a dense, abrasion-resistant surface that is permanently colored. Color hardeners can be troweled, broom finished or textured and stamped to create authentic looking stone or patterned textures. The use of color hardeners make it possible to achieve any number of bright or light colors, or any combination of them on gray concrete.

DISTITRON® 110 SXZ - Unsaturated polyester resin in styrene,DCPD. It is used to produce reinforced plastics,general purpose through hand lay up and spray up method.

VITROFLEX TRANSPARENT MCZ469NN is the acrylic pouring plate with transparent colors that allow vision through.

C.B.Frost & Co. MF775 (FR8775) is a heat cured silicone rubber which cures after the addition of a vulcanising agent (chosen as a function of the production process). FR8775 is available in hardness 75 shore A. The FR8775 is specially designed to manufacture rubber parts for fire resistance applications.

D1-240-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

Return Polymers RP2008 is 100% recycled PVC pulverized into a 20 mesh powder and blended in large quantities to ensure consistency. Primarily used in fence, window, conduit and siding applications with or without a capstock layer and processed by single and or twin screw extrusion.

CSM 600 is used in composite materials production as reinforcing filler with unsaturated polyester resins applied.

AIREX® T90 is a closed-cell, thermoplastic and recyclable polymer foam with excellent fire, smoke & toxicity (FST) properties. It has very good mechanical properties and an extraordinary resistance to fatigue, is chemically stable and has negligible water absorption. It is thermally stable during high temperature processing and post curing. T90 is designed for easy use with all resin systems and processing technologies. AIREX® T90 is the ideal core material for structural sandwich applications requiring high fire resistance.

C-TAPE™ U600P 24K HS* is a unidirectional carbon fiber tape with a continuous weft, with a total weight of 651 gsm. It is made using 24K HS carbon fiber; This carbon tape is used primarily for local reinforcement with epoxy resin. *Disponible également en fiber FOE

D1-115-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

Armor WL550 Enhancer Sealer PRO is a solvent-based silicone water repellent sealer that will protect the surface from damage and deterioration caused by water absorption, and enhance it with a matte wet look finish. The WL550 Enhance Sealer PRO works entirely below the surface and will not leave behind a visible surface film. The WL550 is designed specifically for unsealed concrete, brick, pavers, and natural stone where a color enhancement is desired.

Polynt Group BMC 750 Granito is a bulk molding compound based on an unsaturated polyester resin, quartz filler and reinforced with glass fibers. This BMC has been developed for sinks application to replicate stone effect. BMC 750 Granito joint good surface durability and stain resistance. BMC 750 Granito is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

POLYCOR® LP BR WHITE 9199 - A pre-accelerated gel coat based on modified Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This product is formulated for use in a variety of industrials composite parts.

ENYDYNE® H 66233 TA - Unsaturated polyester resin in styrene,DCPD. It is used as general purpose in hand lay up and spray up method.

DISTITRON® 516 AL - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating method.

GEHR PMMA XT® (ACRYL) is amorphous material belongs to the polymer group of standard plastics, due to its thermal and mechanical properties. In addition to its high mechanical strength and rigidity, it certainly has an extraordinarily brilliant transparency. Its weather and UV resistance as well as its surface hardness are also very high. PMMA is also scratch-resistant and polishable. The continuous operating temperature ranges between -40 °C and +70 °C. The chemical resistance to most solvents, the resistance to stress cracking as well as the toughness is clearly subordinate compared to other materials from the group of standard polymers.

DISTITRON® 1629 NT - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce marine,boats through hand lay up and spray up method.

Polycor® Mesmeric is the most recognizable fiberglass swimming-pool finishes range in australia: it is unbeatable in terms of performance, practicality and value for money, as well as esthetically beautiful. Formulated on Polycor® 943 gel coats, Polycor® mesmeric pool finishes offer exceptional water and chemical resistance, as well as long lasting UV stability. Available in three distinct styles, there is a color and texture combination that will co-ordinate with any architectural or exterior setting. Mesmeric stargaze has a brilliant deep sparkling lustrous finish that looks fabulous from a distance. The tiny sparkles change color as the direction of light changes. A fantastic effect as wave action changes the sparkle in sunlight or by pool light at night. Mesmeric granitea has a slightly more restrained finish, still with a beautiful lustrous gloss, but with a fascinating stone texture enhancement, giving a subtle natural look. Mesmeric silken has a deep, lustrous gloss finish but without any texture effects – designed to blend into more traditional architectural surroundings. It is generally used in composites applicatons.

SKAPS TDBM 1105 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

VITROFLEX OPAQUE N135NN is the colored methacrylate casting plate that does not let light through.

Polynt Group BMC 860 Duralynt is a bulk molding compound based on an unsaturated polyester resin, reinforced with glass fibers this material has been developed to show a high weathering resistance. BMC 860 Duralynt joints good mechanical properties and good flow BMC 860 Duralynt is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

DISTITRON® 814 KV20 - Unsaturated polyester resin in styrene,Tetrahydrophthalic. It is used to produce mastics.

VITROFLEX TRANSPARENT MCR292NN is the acrylic pouring plate with transparent colors that allow vision through.