Products in Fluids & Lubricants: Dry Lubricants

PL181 High Temperature Dry Film Lubricant is a dry film lubricant resistant to corrosive environments, skydrol, lubricants, fuels and operating temperatures of up to 1,300°F, in areas of fretting and anti-galling.

Lube-Lok® S22-T is a low energy cure, low VOC MoS2/graphite based solid film lubricant with an inorganic binder system. This coating was specially developed for titanium, aluminum, and magnesium forming applications. Lube-Lok® S22-T helps to save energy and reduce tooling wear by reducing friction while improving heat transfer characteristics. This coating provides very good wear life, and performs best in higher load carrying applications.

Duraglide™ XF Dry Lubricant is a medical grade, ISO 10993 tested Polytetrafluoroethylene (PTFE) lubricant coating. Duraglide Dry Lubricant coatings impart ultra-low surface friction and minimize device actuation problems caused by “stacked tolerances” in low-speed, light-load medical device assemblies.

Everlube® 9002 is a low VOC MoS2 based solid film lubricant with a high molecular weight epoxy binder system. This coating provides excellent wear life, abrasion resistance, good chemical resistance, and performs the best in higher load carrying applications. Everlube® 9002 is approved/qualified to many aerospace and industrial specification.

Esnalube® 382 is a low VOC, thermally cured, MoS2 based solid film lubricant with a silicate binder system. This coating is designed to provide anti-seize and anti-galling properties in fastener related applications. Esnalube® 382 also provides an extremely low coefficient of friction, very good chemical resistance properties and performs best over a wide range of loads. Specifications for Esnalube® 382 is approved/qualified to many aerospace and industrial specification.

E-Tec 522-B is a dark water-based emulsion that protects all types of finishing. It dries to a satiny film in about 15 minutes.

Everlube® 823 is a Graphite based solid film lubricant with a sodium silicate binder system. Everlube® 823 has good high temperature stability.

Everlube® 9001 is a thermally cured, low VOC MoS2/Graphite based solid film lubricant with a high molecular weight epoxy binder system. This coating provides excellent abrasion resistance, very good chemical resistance, good wear life, and performs best in higher load carrying applications. Everlube® 9001 is approved/qualified to many aerospace and industrial specification.

IKV FILMSEC 1010 (MIL spec 9150-14-528-0001) is a dispersion of PTFE (tetrafluoroethylene telomers) in isopropyl alcohol.

E-Tec 521-B is a one-of-a-kind, water-based wax emulsion that serves as a dual purpose dry film lubricant and corrosion preventive while deepening the black finish. It is suggested for use on artillery shell casings, small arms ammunition clips, and other military weatherproofing applications. E-Tec 521-B is also a good piano stringing lubricant and an excellent corrosion preventive and dry film lubricant for steel strapping.

Everlube® 9420 is a new generation lubricating coating especially formulated to adhere to today’s tougher elastomeric substrates such as EPDM, PVDF, and Viton. This coating is designed to provide a low coefficient of friction and good release properties during production and assembly of rubber and plastic parts.

E-Tec 521 is a one-of-a-kind, water-based wax emulsion that serves as a dry film lubricant as well as a corrosion preventive. It is suggested for use on artillery shell casings, small arms ammunition clips, and other military weatherproofing applications. E-Tec 521 is also a good piano stringing lubricant and an excellent corrosion preventive and dry film lubricant for steel strapping. E-Tec 521 is used as a torque reducer and corrosion resistant lubricant on a variety of fasteners, as well as a dry film lubricant in the installation of a variety of rivets. This product is intended for use as a corrosion-preventive and decorative coating on cast iron and over-treated surfaces such as phosphate, bonderized, and anodized surfaces.

Lube-Lok® S22-TG is a low energy cure, low VOC graphite based solid film lubricant with an inorganic binder system. This coating was specially developed for titanium, aluminum, and magnesium forming applications. Lube-Lok® S22-TG helps to save energy and reduce tooling wear by reducing friction while improving heat transfer characteristics. This coating provides good wear life in medium load applications up to 40,000 psi.

Microcare VDX Dry Lubricant Spray is a medical-grade Polytetrafluoroethylene (PTFE) micro dispersion lubricant. This spray-applied lubricant dispenses in a precise spray pattern ideal for spot lubrication of springs, hinges, and mechanical pinch points in medical device assemblies. VDX provides a low cost, non-migrating inert coating that imparts ultra-low friction surfaces and eliminates sticking problems common in low-speed, light-load mechanical assemblies.

Everlube® 811 is a low VOC, thermally cured, MoS2/Graphite based solid film lubricant which utilizes a silicate binder system. This coating provides excellent thermal stability, very good chemical resistance, is lead free, and performs best in higher load carrying applications. Everlube® 811 is approved/qualified to many aerospace and industrial specification.

Everlube® 853 is a water-based, thermally-cured high temperature anti-gallant lubricant containing graphite with an inorganic binder. Everlube® 853 is designed to lubricate under high temperatures in aviation and propulsion applications. It is ideally suited for fasteners to provide enhanced torque-tension properties and also provides good durability for severe industrial environments. This product does not contain molybdenum disulfide, lead, heavy metals or antimony compounds.

Everlube® 851 is a MoS2/Graphite based solid film lubricant with a phosphate binder system. Everlube® 851 is used for Fastener applications.

IP9136-R3 Graphite Filled Skydrol Resistant Dry Film Lubricant is a spray-applied, stoving cured, silicon resin-modified dry film lubricant for use where high operating temperatures preclude the use of conventional oils and greases. It is suitable for application to steel, aluminum, magnesium and titanium alloys.

Everlube® 9005 is a MoS2 based solid film lubricant with an epoxy binder system. Everlube® 9005 is Lead & Antimony free.

IP7985 Range Anti Corrosion Low Friction Coating is a temperature-resistant baking epoxy finish enhanced with fluoropolymer additives to provide a wear-resistant low friction coating. The choice of binder resin and additive employed in IP7985 provides excellent adhesion and protection properties for a wide range of ferrous and non-ferrous substrates. Examples of this coating find use as diverse as brake calipers for high-performance luxury and sports cars to drill pipe sensors for the oil and gas exploration industry.

PL237-R2 Molybdenum Disulphide Dry Film Lubricant is a high-temperature resistant Molybdenum disulfide loaded dry film lubricant coating.

Aerosol packaged Duraglide™ Dry Lubricant Spray is a medical-grade Polytetrafluoroethylene (PTFE) micro dispersion lubricant. Ideal for medical mold-release and component assembly applications, this lubricant is spray-applied leaving a thin, uniform, dry, PTFE lubricant coating over any surface. This enables a low cost, non-migrating, inert coating that imparts ultralow friction surfaces and minimal sticking problems common in low-speed, light-load mechanical assemblies.

Revol Drylube 4SB is a rapid acting polytetrafluoroethylene dry lubricant for multiple clean applications.

Everlube® 9500 is a low VOC PTFE based solid film lubricant with a high molecular weight organic binder system. This coating provides excellent abrasion resistance, very good corrosion, chemical resistance and performs best in lighter load carrying applications. For a water based coating, this product is very user-friendly.

Everlube® 812 is a thermally-cured, MoS2 based solid film lubricant with a sodium silicate binder system. This coating is specifically designed to provide lubrication in higher temperature applications. Everlube® 812 provides a low coefficient of friction and good wear life, even at elevated temperatures.

Everlube® 9502 is a PTFE/MoS2 based solid film lubricant with an epoxy binder system. Everlube® 9502 is used for Fastener applications.

Revol R10 Moly Drylubefast drying fluid leaving a securely adhered Molybdenum disulfide dry film.

Everlube® 858 is a Graphite Blend based solid film lubricant with a phosphate binder system. Everlube® 858 provides excellent thermal stability, and Silver replacement.

E-Tec 522 is a one-of-a-kind, water-based wax emulsion with excellent adhesion and durability on a variety of substrates. It dries to a satiny film in about 15 minutes without losing its wax characteristics or lubricity. It can be used on lightly oiled surfaces and dries to a tack-free finish. This product provides a temporary protective coating to aid in the prevention of corrosion during part storage and shipment.

Lube-Lok® 2396 is a low VOC, thermally cured, MoS2/Graphite based solid film lubricant which utilizes a silicate binder system. This coating provides excellent thermal stability, very good chemical resistance, lead free, and performs best in higher load carrying applications. Lube-Lok® 2396 is approved/qualified to many aerospace and industrial specification.

IP7420 Range 2Pk Epoxy Dry Film Lubricant is a 2-part air drying PTFE loaded epoxy finish used to provide an abrasion and wear-resistant coating. The Dry finish is resistant to abrasion, corrosion and most vehicle operating fluids and chemical attack from brake fluid.