Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features & Benefits
- Excellent thermal stability.
- Excellent coefficient of friction.
- Very good wear life.
- Ideal for higher load carrying applications.
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Markets
- Medical
- Semiconductor
- Fabricated Metal Parts
- Fasteners
- Typical Applications
- Specialty fasteners.
- Bushings, shafts, and splines.
- Bearing guides and sleeves.
- Gears, cams and followers.
- Suggested Pretreatment
Grit Blast
- Suggested Application Method
Dip Spin, Brush or Spray
- Dilution/Cleanup Solvent
Deionized Water
- Cure Cycle
2 hour at 180°F, then 2 hour at 400°F.
Properties
- Physical Properties
Value Units Test Method / Conditions Binder Silicate - - Carrier Water Borne - - Appearance Light Gray Matte Finish - - Density 13.1 - 14.1 Ib/gal - Lubricating Solid MoS₂, Graphite - - Solids (By Weight) 51 - 55 % - Theoretical Coverage (0.5 mils) 936.0 ft²/gal - VOC Content 0.0 grams/liter - - Typical Properties
Value Units Test Method / Conditions Abrasion Resistance Fair - ASTM D-4060 Coefficient of Friction 0.02 - 0.04 - ASTM D2714 Corrosion Resistance Test Panel max. 48 hours ASTM B117 Corrosion Resistance Test Panel Coating Method (Grit Blasted Steel Panel) 0.8 mil - Dilution Ratio As needed with Deionized Water - - Dry Film Thickness 0.2 - 1.4 mils - Load Carrying Capacity max. 100000 psi ASTM D2625, Method B Operating Temperature Range -300 - 750 - - Wear Life min. 60 minutes ASTM D2625, Method A - Chemical Resistance
Value Units Test Method / Conditions Acetone Pass - ASTM D-2510, Method C Anti-Icing Fluids Pass - ASTM D-2510, Method C Diethanolamine Pass - ASTM D-2510, Method C Distilled Water Not Recommended - ASTM D-2510, Method C Hydraulic Fluids Pass - ASTM D-2510, Method C Hydrochloric Acid (10%) Not Recommended - ASTM D-2510, Method C Isopropyl Alcohol or Ethyl Alcohol Pass - ASTM D-2510, Method C Jet Fuels (JP-4) Pass - ASTM D-2510, Method C Mineral Spirits or Paint Thinner Pass - ASTM D-2510, Method C Skydrol 500 (room temperature) Not Recommended - ASTM D-2510, Method C Sodium Hydroxide (10%) Not Recommended - ASTM D-2510, Method C Toluene Pass - ASTM D-2510, Method C Trichloroethylene Pass - ASTM D-2510, Method C
Packaging & Availability
- Packaging Type
- Packaging
Lube-Lok 2396 is available in gallon, quart, and 5-gallon pails.
Storage & Handling
- Shelf Life & Storage
One year from date of shipment, stored in a factory sealed container between the temperatures, 40°F to 100°F. Coatings are thermally stable, but we do not recommend prolonged exposure outside of the specified temperature range listed above.