Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features & Benefits
- Excellent thermal stability.
- Excellent coefficient of friction.
- Good wear life and higher load carrying capacity.
- Lox Compatible.
Applications & Uses
- Markets
- Applications
- Application Method
- Cure Method
- Markets
- Aerospace/Defense
- Mechanical Components
- Industrial Machinery & Equipment
- Chemical Processing
- Typical Applications
- Threaded connectors and disconnects.
- Rings and seals.
- Virtually all fasteners.
- Bushings, rotary joints, cams and pins.
- Suggested Pretreatment
Grit Blast
- Suggested Application Method
Spray
- Dilution/Cleanup Solvent
Deionized Water
- Cure Cycle
2 hour at 175°F ± 25°F, then 2 hour at 400°F ± 25°F.
Properties
- Physical Properties
Value Units Test Method / Conditions Binder Silicate - - Carrier Water Borne - - Appearance Matte Gray Finish - - Density 13.1 - 14.1 Ib/gal - Lubricating Solid MoS₂, Graphite - - Solids (By Weight) 51 - 55 % - Theoretical Coverage (0.5 mils) 936.0 ft²/gal - VOC Content 0.0 grams/liter - - Typical Properties
Value Units Test Method / Conditions Abrasion Resistance Fair - ASTM D-4060 Coefficient of Friction 0.02 - 0.04 - ASTM D2714 Corrosion Resistance Test Panel max. 48 hours ASTM B117 Corrosion Resistance Test Panel Coating Method (Grit Blasted Steel Panel) 0.5 mil - Dilution Ratio (Product to Solvent) Concentrate to 1:1 - - Dry Film Thickness 0.2 - 0.6 mils - Load Carrying Capacity max. 100000 psi ASTM D2625, Method B Operating Temperature Range -365 - 750 °F - Wear Life min. 60 minutes ASTM D2625, Method A - Chemical Resistance
Value Units Test Method / Conditions Acetone Pass - ASTM D-2510, Method C Anti-Icing Fluids Pass - ASTM D-2510, Method C Diethanolamine Pass - ASTM D-2510, Method C Distilled Water Not Recommended - ASTM D-2510, Method C Hydraulic Fluids Pass - ASTM D-2510, Method C Hydrochloric Acid (10%) Not Recommended - ASTM D-2510, Method C Isopropyl Alcohol or Ethyl Alcohol Pass - ASTM D-2510, Method C Jet Fuels (JP-4) Pass - ASTM D-2510, Method C Mineral Spirits or Paint Thinner Pass - ASTM D-2510, Method C Skydrol 500 Pass - ASTM D-2510, Method C Sodium Hydroxide (10%) Not Recommended - ASTM D-2510, Method C Toluene Pass - ASTM D-2510, Method C Trichloroethylene Pass - ASTM D-2510, Method C
Packaging & Availability
- Packaging
Everlube 811 is available is gallon, 5-gallon pail, and quart.
Storage & Handling
- Shelf Life & Storage
One year from date of shipment, stored in a factory sealed container between the temperatures, 40°F to 100°F. Coatings are thermally stable, but we do not recommend prolonged exposure outside of the specified temperature range listed above.