Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features & Benefits
- Good release properties.
- Excellent flexibility.
- Good lubricity.
- Excellent adhesion to elastomeric substrates.
Applications & Uses
- Markets
- Applications
- Application Method
- Compatible Substrates & Surfaces
- Markets
- Elastomeric Parts
- Mechanical Components
- Industrial Machinery
- Fabricated Metal Parts
- Typical Applications
- Elastomeric Parts
- Plastic Components
- O-rings and Seals
- Suggested Pretreatment
Degrease only
- Suggested Application Method
Spray
- Dilution/Cleanup Solvent
May be thinned with Deionized Water less than 10% by volume if needed.
- Cure Cycle
30 minutes at 77°F ± 10°F then 15 to 30 minutes at 150°F to 250°F
Properties
- Physical Properties
Value Units Test Method / Conditions Binder Organic - - Carrier Water Borne - - Appearance Clear - - Density 8.3 - 9.3 Ib/gal - Lubricating Solid PTFE - - Solids (By Weight) 27 - 31 % - Theoretical Coverage (0.5 mils) 802.0 ft²/gal - VOC Content 40.7 grams/liter - - Typical Properties
Value Units Test Method / Conditions Coefficient of Friction 0.02 - 0.06 - ASTM D2714 Dilution Ratio (Product to Solvent, By Volume) Concentrate to 9:1 - - Dry Film Thickness 0.5 - 1.2 mils - Load Carrying Capacity max. 10000 psi ASTM D2625, Method B Operating Temperature Range -100 - 250 °F - Wear Life min. 10000 cycles ASTM D2625, Method A - Chemical Resistance
Value Units Test Method / Conditions Acetone Not Recommended - ASTM D-2510, Method C Anti-Icing Fluids Not Recommended - ASTM D-2510, Method C Diethanolamine Not Recommended - ASTM D-2510, Method C Distilled Water Pass - ASTM D-2510, Method C Hydraulic Fluids Not Recommended - ASTM D-2510, Method C Hydrochloric Acid (10%) Not Recommended - ASTM D-2510, Method C Isopropyl Alcohol or Ethyl Alcohol Not Recommended - ASTM D-2510, Method C Jet Fuels (JP-4) Not Recommended - ASTM D-2510, Method C Mineral Spirits or Paint Thinner Not Recommended - ASTM D-2510, Method C Skydrol 500 Not Recommended - ASTM D-2510, Method C Sodium Hydroxide (10%) Not Recommended - ASTM D-2510, Method C Toluene Not Recommended - ASTM D-2510, Method C Trichloroethylene Not Recommended - ASTM D-2510, Method C
Packaging & Availability
- Packaging Type
- Packaging
Everlube 9420 is available is gallon, quart, and 5-gallon pail.
Storage & Handling
- Shelf Life & Storage
One year from date of shipment, stored in a factory sealed container between the temperatures, 40°F to 100°F. Coatings are thermally stable, but we do not recommend prolonged exposure outside of the specified temperature range listed above.