Products in Ready-to-Use Products

NEOSORB® PF pyrogen-free sorbitol is used: as a carbohydrate source and osmotic diuretic agent in large-volume parenteral injectables as an isotonic agent for Rx injectables as an irrigating fluid for surgical procedures, to prevent intra- and extra-cellular dehydration

XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt is a high-viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of viscosities. The viscosities generally used in formulating polishes are in the range of 100 to 30,000 cSt. It is preferable to use a blend of a low-viscosity fluid and a high-viscosity fluid (e.g. 3 parts XIAMETER(TM) PMX- 200 Silicone Fluid 100 cSt and 1 part XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt) to obtain optimum results in terms of ease of application and depth of gloss. The low-viscosity silicone fluid acts as a lubricant to make polish application and rubout easier, whereas the high-viscosity silicone fluid produces a greater depth of gloss. Since these polymers are inherently water-repellent, they will cause water to bead up on a treated surface rather than penetrate the polish film.

Loxon, the œwork horse of the appliance industry, is a blend of high-tech polymers specifically synthesized and produced for metal decorating applications. Loxon has been developed to meet new appliance specifications. It has superior resistance to laundry group detergents and new generation spot removers. Loxon has passed virtually all other chemical resistance tests called for in the appliance industry.

RTU Inks Bis an economical version of ink designed for optimum performance in dually on specific printheads as defined by the user. AT Inks offers RTU Inks B of inks that work on a specific printhead and designs it and as well as test it on specific printheads before dispatch.

RTU Lacquer can be applied using spray, dip, or centrifugal methods. has the reversibility of a solvent cleaner and works as a ready-to-use reducer

Silicone Foams is used by the aircraft industry as silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings General Purpose: Silicone FoamComment: Flame Resistant, 25 lb/ft³ (0.400 g/cm³).

MultiTech Binder & Resin is UV-curable undercoat for metal vapor deposition. It has good adhesion not only to vapor deposition layer of aluminum, tin and indium but also to plastic substrates, such as ABS, PC(Polycarbonate) and PMMA. Automotive exterior/interior parts such as millimeter-wave radar emblems are suitable applications of UM-1273T.

RTU Metalworking Fluid is a premium quality multi-purpose, non-staining product formulated with a chlorinated performance additive. RTU Metalworking Fluid also contains an oiliness additive for additional performance, especially on draggy, soft metals. It gives excellent performance on high speed heavy duty operations on most types of steels and non-ferrous metals. This product can also be used as gear oil, hydraulic oil, and general machine oil.

RTU Adhesive B is a two-component, addition-curing silicone composition curing to a soft silicone adhesive.

RTU Cleaner B is dilutable, no-rinse sanitizer for food and non-food contact surfaces.

MultiTech Difunctional B is a product that is specially developed for the formation of active chlorine dioxide generated by mixing powdered inputs that are indicated for higher flows and systems of medium or high complexity. It is used in applications that demand safety, metering accuracy, and reliability. This product is a blend of water-soluble salts, making it 100% soluble, and easy to handle and apply. It also has a low operating cost.

RTU Enamel is an extremely hard and durable two-component epoxy for consumer and professional use. It is specially designed to restore the finish on tubs, sinks, toilets, ceramic wall tiles, and appliances. Klenk's Epoxy Enamel can be used on any hard, solvent-resistant surface, such as ceramic, metal, stone, marble, melamine, fiberglass, etc. Do not use on plastic or imitation marble, stove top ranges, or other surfaces subject to excessive heat. Always test surface with RTU Enamel Thinner prior to use. RTU Enamel is available in three standard colors (White, Bone, Almond) as well as special order colors.

Polymer Mold Release Agent is a versatile coating designed to release all injection molded thermoplastic resins. It produces a very low coefficient of static friction so parts release easily. It resists film buildup, eliminates knit lines, and yields multiple releases with a single application. TPC-1 is food grade and meets FDA regulation 21 CFR181.28 as a release agent.

MultiTech MultiFunctional I is a high-viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of viscosities. The viscosities generally used in formulating polishes are in the range of 100 to 30,000 cSt. It is preferable to use a blend of a low-viscosity fluid and a high-viscosity fluid (e.g. 3 parts MultiTech MultiFunctional I and 1 partMultiTech MultiFunctional I to obtain optimum results in terms of ease of application and depth of gloss. The low-viscosity silicone fluid acts as a lubricant to make polish application and rubout easier, whereas the high-viscosity silicone fluid produces a greater depth of gloss. Since these polymers are inherently water-repellent, they will cause water to bead up on a treated surface rather than penetrate the polish film.

CASE Ingredients Solvent A is a biobased replacement for d-limonene made from green, carbon neutral, sustainable chemistry that is biodegradable. It is an EPA approved SNAP solvent that contains no HAPS, and no environmentally hazardous chemicals. It is a completely safe, non-toxic and non carcinogenic alternative to high priced d-limonene.

MultiTech Lubricant is a nonionic macro emulsion of a nonreactive polydimethylsiloxane.

RTU Encapsulant is a pourable, addition-curing, 2-part silicone rubber of low viscosity that cures extremely fastafter activation by UV light exposure to a soft silicone elastomer.

RTU MultiPurpose provides extreme pressure performance, fuel resistance, and good damping properties. This product is used in aerospace applications, bearings, gears, and optical applications.

Designed for all RTU Inks C digital printers, the BB ultra flexible ink for plastic is cured instantly by UV LED light. The BB Series digital ink offers bright, vibrant colors, excellent adhesion, and high abrasion resistance. BB ink will bend and fold with ease without cracking or distorting the print. Ideal for flexible drinkware such as bike bottles. So dont get stuck with a sub-par label or a 1-color print, go digital with full-color prints direct to flexible plastic and upgrade your graphics.

RTU Ink E is a waterborne, low V.O.C., electrically conductive ink and coating suitable for application by rotogravure or flexographic. This product features adhesion to Kapton, Mylar, glass, and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for RTU Ink E include, but are not limited to, medical electrodes, EMI/RFI shielding, polymer thick film circuitry and membrane switches. RTU Ink E is a higher viscosity version of 119-32.Features Water based conductive ink

RTU Hot-Melt Adhesive is a standard hotmelt silicone adhesive, specifically designed for transdermal drug delivery systems. It can be melted for coating, and then will return to a generally flowless state upon cooling. RTU Hot-Melt Adhesive adhesives are permeable to many drugs and excipients and are designed to adhere drug-loaded systems to the skin. RTU Hot-Melt Adhesive is produced through a condensation reaction of a silanol endblocked polydimethyl-siloxane (PDMS) with a silicate resin. The addition of a PDMS plasticizer to the condensate provides the adhesives hot melt characteristics.

RTU Medical Grade Lubricant is a proprietary hydrojel formulation that was developed in the early 1970's as a non-drying, water-soluble lubricant for the medical industry. RTU Medical Grade Lubricant has been marketed since its development in 1973 as a medical lubricant. It has been used as a general and instrument lubricant for use during physical exams, and applied to catheters, thermometers and a host of other instruments to aid in use and patient comfort.

RTU Grease A for the lubrication of highly stressed open gears and reducing gears made of metal, with a peripheral speed of up to 2.5 m/s. Open gears that are subjected to high stresses and bad weather effects. Successfully used in crushing plants and in transmission gears and threaded spindles of heavy, crank-driven presses.

RTU Inks A are formulated fromDayGlo RTU Inks A Base colors. They are a unique combination of ultra-fine, high strength fluorescent pigment dispersed in a rheologically controlled vehicle system. This yields maximum color density and excellent printability. Developed to meet the needs of the printer and the color specifier.

RTU Grease B is a stiff water repellent non-melting silicone grease lubricant.

RTU Foam is a polyethylene foam material that is expanded in heat oven after extruded with the help of chemical inflators and cross linking agents that are put inside. It has advanced chemical and mechanical features thanks to its cross-linked structure Compared to DurProx (physically Cross-Linked Polyethylene Foam) the cell structure is larger and the surface is not as smooth. It can be used in many areas that sound, heat, humidity insulation and shock protection is intended. It can be produced for different sectors as cut plate, roll, tube, extra-laminated or non-laminated.

CASE Ingredients Solvent B is a patented formula of vegetable esters made from soybeans and corn, and is ideal for formulating mastic/adhesives removers, asphalt cleaners, release agents, and hand cleaners.

RTU Foam A is a co-extruded combination of PETG Copolyester resin with a proprietary foamed core made from Eastmans RTU Foam A System. RTU Foam A offers advantages over traditional materials where low weight and sustainability are larger parts of an applications fitness for use requirements. PETG FOAM is a reliable, safe alternative to high impact polystyrene (HIPS) in the opaque rigid medical packaging market. PETG FOAM also shows considerable manufacturing improvements over HIPS in terms of processing, waste reduction, and reduced cleaning; all resulting in lower overall processing costs.

RTU Powder Coating is a red semi gloss texture color used as polyester TGIC powder coating.

RTU Cleaner A is a waterborne high performance blend of anionic and nonionic surface active agents that will remove oil, grease and dirt residue from any washable surface. It is biodegradable, non-hazardous and VOC compliant. TERAZYME GP„¢ is formulated for quick, thorough lifting and suspension of contaminants for easy rinsing. TERAZYME GP„¢ has undergone years of field trials and testing to meet government regulations for safe, non-toxic chemicals and is authorized by the USDA for use in federally inspected meat and poultry plants.

Ditech Multifunctional B is used for a broad range of applications but mainly used as raw materials or auxiliaries in fiber production, for agricultural products, in photography and in the chemical industry. The Ditech Multifunctional B has been especially developed to serve to the particular requirements of the construction and Admixture Industry.

RTU Adhesive A is a warm processable, high viscosity, high modulus, low conductive glass bonding adhesive can be used primerless on paint and glass._x005F _x005F It should be combined with a clear activator developed for Uniwipe Adhesives on ceramic coated glass. It is a one component, moisture curing, solvent free adhesive with excellent sag and bead stability based on polyurethane chemistry. The BRTU Adhesive A adhesive cures with environmental moisture and skin formation and curing is dependent on humidity, temperature and application dimensions._x005F _x005F All DuPont Adhesives products are primarily developed in co-operation with the automobile manufacturers, according to their needs and their specifications, they are approved for the specific applications as defined by the customer. The use of the product other than approved appliction have to be released in written form by the Technical Service of DuPont Adhesives.

DiTech Foam Stabilizer is a potassium soap used as a cleaning agent and foam controller in detergent formulas. Due to its anionic character, ICTEOL® K-50 E is compatible with other anionic, non-ionic, amphoteric surfactants, but it is not compatible with cationics.