Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Foam Type
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Application Method
- Product End Uses
- Uses
RTU Foam B can be used for a variety of applications including, but not limited to, areas of air infiltration, windows & doors, electrical panels, insulation, pipes.
- Direction for Use
- Type : All substrates except PE and PP.
- State of Surface : clean, free of dust and grease.
- Preparation : Moistening of the surfaces improves adhesion, curing and denser cellular structure.
- Method : Aerosol can, shake well before use, insert into gun adaptor, turn 90 degrees where can is upside down and click to fit into foam gun. Shake can regularly during application. If PU Foam is applied in layers, spray surface with a fine water spray between each layer to ensure optimal cellular structure and perfect curing.
Properties
- Physico-Chemical Properties
Value Units Test Method / Conditions Take Free (for a ½" Bead) 5 - 10 minutes - Service Temperature 10 - 230 °F - R-Value 4.25 psi ASTM C518 Pressure Build 0.15 - 1.20 psi - Curing Rate (for a ½" bead) 30 minutes - Coverage 147 ft - Core Density 1.25 - 1.70 lbs./ft³ -
Safety & Health
- Health and Safety Recommendations
Apply the standard industrial hygiene techniques. Wear gloves and safety goggles. Remove cured foam by mechanical means only, never burn away.
Packaging & Availability
- Packaging Type
- Packaging
Aerosol cans
Storage & Handling
- Shelf Life
- 24 Months
- Storage
Material must be stored upright when not in use at a temperature of 50 - 68°F. Shelf Life is 24 months from date of manufacture in unopened packaging in a cool and dry storage place at temperatures of 75°F.