Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features & Benefits
- Excellent thermal stability.
- Excellent low coefficient of friction.
- K-factor similar to silver on fasteners.
- Low VOC, "Green" coating, no heavy metals.
Applications & Uses
- Markets
- Applications
- Application Method
- Cure Method
- Markets
- Fasteners
- Aerospace/Defense
- Industrial Machinery & Equipment
- Mechanical Components
- Typical Applications
- Self locking fasteners.
- Aircraft engine components.
- Slides, guides, rails, pulleys, blade roots.
- Bearings and cams.
- Suggested Pretreatment
Grit Blast
- Suggested Application Method
Spray
- Dilution/Cleanup Solvent
May be thinned with Deionized Water less than 10% by volume.
- Cure Cycle
30 minutes at 150 to 200°F and 1 hour at 450 to 650°F.
Properties
- Physical Properties
Value Units Test Method / Conditions Binder Inorganic Binder - - Carrier Water Borne - - Appearance Matte Gray Black Finish - - Density 7.8 - 8.8 Ib/gal - Lubricating Solid Graphite - - Solids (By Weight) 25 - 29 % - Theoretical Coverage (0.5 mils) 876.0 ft²/gal - VOC Content 0.0 grams/liter - - Typical Properties
Value Units Test Method / Conditions Abrasion Resistance Fair - ASTM D-4060 Adhesion Pass - ASTM D-2510, Method C Coefficient of Friction 0.02 - 0.06 - ASTM D2714 Corrosion Resistance Test Panel (5% Neutral Salt Spray) max. 100 hours ASTM B117 Corrosion Resistance Test Panel Coating Method (Grit Blasted Steel Panel) 0.6 mil - Dry Film Thickness 0.3 - 0.7 mils - Load Carrying Capacity max. 40000 psi ASTM D2625, Method B Operating Temperature Range -100 - 1200 °F - Thermal Stability Pass - ASTM D-2511 Wear Life min. 30 minutes ASTM D2625, Method A - Chemical Resistance
Value Units Test Method / Conditions Acetone Pass - ASTM D-2510, Method C Aircraft Turbine Oil (MIL-L-7808) Pass - ASTM D-2510, Method C Anti-Icing Fluids Pass - ASTM D-2510, Method C Cleaning Compound (Small Arms) Pass - ASTM D-2510, Method C Diethanolamine Not Recommended - ASTM D-2510, Method C Distilled Water Not Recommended - ASTM D-2510, Method C Hydraulic Fluid (MIL-H-5606) Pass - ASTM D-2510, Method C Hydraulic Fluids Pass - ASTM D-2510, Method C Hydrochloric Acid (10%) Not Recommended - ASTM D-2510, Method C Isopropyl Alcohol or Ethyl Alcohol Pass - ASTM D-2510, Method C Jet Fuels (JP-4) Pass - ASTM D-2510, Method C Lube-Oil, Weapons, Semi-Fluid Pass - ASTM D-2510, Method C Mineral Spirits or Paint Thinner Pass - ASTM D-2510, Method C Non-Petroleum Hydraulic Fluid (MIL-H-8446) Pass - ASTM D-2510, Method C Skydrol 500 Pass - ASTM D-2510, Method C Sodium Hydroxide (10%) Not Recommended - ASTM D-2510, Method C Toluene Pass - ASTM D-2510, Method C Trichloroethylene Pass - ASTM D-2510, Method C
Packaging & Availability
- Packaging Type
- Packaging
Everlube 853 is available in gallon, 5-gallon pail, gallon, and quart.
Storage & Handling
- Shelf Life & Storage
One year from date of shipment, stored in a factory sealed container between the temperatures, 40°F to 100°F. Coatings are thermally stable, but we do not recommend prolonged exposure outside of the specified temperature range listed above.