Products in Prepregs & Molding Compounds: Laminate

ES2 consists of three internal layers (two colored decorative surfaces, two white sub-cores just below the surfaces, and a black core centered in the thermoset composite material). ES-2 is a five-ply material, which comes in a standard sheet size of 36 inches ± 1.00 x 39 inches ± 1.00, with standard-thicknesses of 3/32 and 1/8 inch. Weights of the three standard-thickness sheets are approximately 7.0, and 9.3 lb., respectively. Standard finish options are polished, or P (highly polished and shiny), or LS (non-brushed and dull).

Canvas phenolic laminate with graphite added as a solid lubricant. This material has improved wear properties under certain conditions. Material is conductive to electricity and should not be used where this is detrimental to the application.

Canvas phenolic laminate with molybdenum disulfide lubricant. The mechanical properties are slightly lower than NP310. NP313 is used for lubricity in the composite when carbon (graphite) cannot be used because of conductivity.

Hot punching general-purpose phenolic grade. Mechanical properties approach those of NP610 with improved electrical properties and moisture resistance. NP611 meets the requirements of IEC60893-3-4-PF CP 201.

Warm punching, composite grade with woven glass covers for improved flexural, tensile and impact strength. It has better electrical properties and higher mechanical strength than NP611.

Toray Toray Cetex® TC925 FST is a value-oriented engineered thermoplastic composite, utilizing a polycarbonate compound for impact toughness and good fire resistance. Although Toray Cetex® TC925 FST is a cost-effective material to begin with, the real cost saving on a part level lies in streamlining production with < 3 minutes per automated process cycle, cutting out most manual postprocessing and potential for error. Additionally, this material offers a very good surface quality. Toray Cetex® TC925 FST is available as a fabric prepreg, but is typically supplied in pre-consolidated reinforced thermoplastic laminates (RTLs) of varying thicknesses and lay-ups. Laminates from natural color resin have a translucent quality. A white color option is also available. PolyCarbonate (PC) Thermoplastic Resin System.

Resiten® C (0.062 in Thick) laminates are extremely durable, lightweight, and moisture resistant. they are available in sheet, strip, block, and fabricated parts.Applications are Military Service and Industrial Applications.

Atlas Fiber G-3 Sheet is an amber/brown material with a glass fabric reinforcement in a phenolic resin binder. G-3 is probably the strongest overall laminate with excellent tensile, compressive, impact, and flexural strength at elevated temperature.

ISOVAL® R (EP GC 205) is made of glass roving fabric using the temperature-resistant ISOVAL® epoxy resin system. This gives the material excellent heat resistance and chemical resistance as well as a permanent temperature resistance of over 180 °C according to IEC 216. It is made With glass roving fabric, similar to ISOVAL 11, but for larger parts, Thermal Class H (180 °C).

RO4835T™ laminates are 3.3 Dk low loss, spread glass reinforced, ceramic thermoset materials that were designed as inner-layers for use in multilayer board designs, and to complement RO4835™ laminates when thinner cores are needed.

Tufnol Grade 1P/13 is a low-cost commercial paper-based laminate, produced to meet the need for an economical material where electrical requirements are moderate. As a good basic, low voltage insulation material, this grade has a higher mechanical strength than the other grades in our phenolic paper range and greater impact strength. It can be machined readily and components can be hot punched in thicknesses up to 3.2mm.

Acculam™ Epoxyglas G11/FR5 comprised of flame retardant/heat resistant epoxy resin and a woven fiberglass substrate. It qualifies to NEMA FR5 and MIL-I-24678/28.This material exhibits extremely high mechanical strength at elevated temperatures. It shows good dielectric loss and electric strength properties under both dry and humid conditions. It has good chemical resistance and low moisture absorption.

Lamitex® G-5 MF GC 21 glass/melamine laminated sheet is most frequently preferred for applications that require high mechanical strength, exceptional arc resistance and self extinguishing properties.

CIP Composites CIP111 is ideal for dry/indoor applications, this material offers a low maintenance and cost effective solution for eliminating external lubrication without compromising performance. 100% polyester material (textile and resin) with the solid lubricant graphite evenly dispersed throughout the resin system.

AD1000 is a high dielectric constant substrate that permits circuit miniaturization, compared to traditional low loss materials. It is especially beneficial for power amplifiers, filters, couplers and other components using low impedance lines.AD1000 is a woven glass reinforced laminate. This allows for Greater Dimensional Stability and Mechanical Robustness than other 10 Dk Products. Its large panel size is also advantageous for “multi-circuits per panel” processing.

Current Incorporated LAMINATED SHEET NEMA Canvas Electrical Grade (CE) MIL-I-24768/14 is made of woven cotton fabric with a phenolic resin binder. Materials with glass substrates are better suited for electrical applications that require good moisture resistance and mechanical strength. It has good dialectric properties and a medium dielectric loss.

Gillfab® 1167 and 1167A are excellent impact resistant laminates made from fiberglass cloth reinforced phenolic resin. Gillfab® 1167 has a white polyvinyl fluoride film overlay on the face side and Gillfab® 1167A does not.

Resiten® G10FR4 laminates are extremely durable, lightweight, and moisture resistant. they are available in sheet, strip, block, and fabricated parts.Applications are Military Service and Industrial Applications.

Delmat® Polyester 68010 GPO-3 is composed of polyester matrix and glass mat reinforcement. it appears in RED RAL 9001 color with UP GM 203 GPO-3 Standards.

Current Incorporated LAMINATED SHEET NEMA Linen Electrical Grade (LE) MIL-I-24768/13 is used when electrical applications require good moisture and acid resistance, best for machined parts with smooth edges, is similar to L It has good dielectric properties and a low dielectric loss.

Aekyung Chemical SLO-180NT is an ortho type UPR.

P95/P25 consist of an HB flammability rated polyimide resin system suitable for military, commercial or industrial electronic applications requiring superior performance and the utmost in thermal properties. These products utilize a polyimide and thermoplastic blend resin, fully cured without the use of MDA (Methylenedianiline). This results in a polymer with a high Tg without the characteristic difficulties of brittleness and low initial bond strength associated with traditional thermoset polyimides.

Toray Toray Cetex® TC930 is a thermoplastic composite using a high density polyethylene (HDPE) matrix. This product is commonly used in pipe overwrapping Applicationss because of its high hoop strength, low modulus, and excellent chemical resistance. Toray Cetex® TC930 is available in a pigmented glass-reinforced tape. Indefinite at 25°C (77°F).

CFP Composites BM-5 is cost comparable to aluminum on a fully finished component basis, but with all the benefits of carbon fiber.

IS550H was developed in conjunction with a consortium of industry experts for high power & high voltage applications and PEV & HEV automotive electrification. The resulting solution addresses critical application needs for use in a harsh environment where very demanding, long term thermal reliability performance, extreme thermal cycling and very high voltage CAF & electro-migration resistance is required.

ISOVAL® TU 21/FR4 (EP GC 21) is made up of Flame-resistant, halogen-free round rolled epoxy glass fabric laminate tube with high strength for mechanical and electrical applications

Vetronite® EGS 619 is composed of epoxy matrix and glass fabric reinforcement. it appears in Light green color with EP GC 202 FR-4 Standards.

IS415 is engineered to meet the demands of Lead (Pb) free multilayer printed circuit assembly, deliver CAF resistance with strong IST results and maintain FR-4 processing. IS415 offers good electrical performance, superior chemical and thermal performance and product consistency.

Aekyung Chemical GF-120 is an ortho type UPR.

INBORD® EGS is a phenole/melamine laminate having a Tracking index CTI 600 for switchgear with improved safety in case of arcing, with additional glass cloth reinforcement.

Gillfab® 1042 is a heat resistant laminate made from phenolic resin with fiberglass cloth reinforcement with smooth bondable faces intended for both laminate and sandwich construction.

Vetronite® EGS 102 is composed of epoxy matrix and glass fabric reinforcement. it appears in Green color with EP GC 201 G-10 Standards

Aekyung Chemical CW-350 is a tere type UPR.

FR406 No-Flo and FR406 Lo-Flo® products bring the fabricator specific thermal characteristics appropriate for use in heat sink bonding, die cavity board (direct chip attachment) and multilayer rigid-flex applications.

The AD Series™ antenna materials from Rogers Co rporation are high performance, specialty materials that are specifically engineered and manufactured to meet the demands of today’s wireless antenna markets. Increased antenna performance requirements are a constant trend in the market today. Rogers has the materials needed to meet the design needs of this market both today and into the future.

MICAM’s EG-10 Grade is a G-10 epoxide resin laminate, based on a medium weave glasscloth, with excellent machining and punching characteristics.