Products in Prepregs & Molding Compounds: Laminate

Atlas Fiber G11 Sheet is a grade similar in composition and properties to G-10 but more suitable for continued use at elevated temperature. G-11 retains at least 50% of its structural strength at elevated temperatures in excess of 300°F. Due to its higher cost, G-11 applications are limited to only the most critical high heat situations.

Vetronite® SGS is composed of Silicone and glass fabric reinforcement. it appears in White with SI GC 202 G-7 Standards.

VOLTIS® Hgw RO 42 (PF CC 42) is a Round molded phenolic cotton fabric laminate rod with high toughness for mechanical applications.

I-Speed® laminate and prepreg products are manufactured with Isolas' patentable high performance multi-functional resin system, reinforced with electrical grade (E-glass) glass fabric. This system delivers a 15% improvement in Z-axis expansion and offers 25% more electrical bandwidth (lower loss) than competitive products in this space. These properties coupled with superior moisture resistance at reflow, result in a product that bridges the gap from both a thermal and electrical perspective. The I-Speed® resin system is laser fluorescing and UV blocking for maximum compatibility with Automated Optical Inspection (AOI) systems, optical positioning systems and photo imageable solder mask imaging.

MICAM EM42 is a limited fire hazard laminate which is a glass-fiber reinforced epoxy resin composite material. It is produced by a high temperature and high pressure process which produces a high strength void-free laminate suitable for a range of applications including electrical insulation and building construction applications.

VOLTIS® Hp TU 21 (PF CP 21) is a Round rolled phenolic paper laminate tube for mechanical and electrical applications.

RO4830™ thermoset laminates are well suited for price-sensitive millimeter wave applications, such as 76-81 GHz automotive radar sensors, and are a reliable, lower cost alternative to conventional PTFE-based laminates. RO4830 laminates have a slightly higher dielectric constant of 3.2 at 77GHz, versus PTFE-woven glass laminates. LoPro® reverse treated copper foil cladding contributes to RO4830 laminates’ excellent insertion loss at 77GHZ of 2.2 db per inch.

Canevasite® FF-5964 is composed of phenolic fabric matrix and cotton fabric reinforcement. It appears in brown color with PF CC 204 LE Standards.

RT/duroid® 6202 high frequency circuit material is a low loss and low dielectric constant laminate offering superior electrical and mechanical properties essential in designing complex microwave structures which are mechanically reliable and electrically stable.

Toray Toray CFRT® PW-1000 is a reinforced thermoplastic composite laminate. It blends the benefits of a thermoplastic polymer matrix with woven carbon and glass fibers in a plain weave for enhanced performance. The PW-1000 style laminate is available in a single-layer product; carbon in one direction and glass fibers at a 90° orientation to the carbon. This product is ultra-thin, lightweight, and resilient for improved energy return.

Resiten® CEM800 (0.125 in Thick) laminates are extremely durable, lightweight, and moisture resistant. they are available in sheet, strip, block, and fabricated parts.Applications are Military Service and Industrial Applications.

Current Incorporated LAMINATED SHEET NEMA G-10 MIL-I-24768/2 is made of a continuous filament woven glass fabric laminated with an epoxy resin binder and has a high mechanical strength (flexural, impact, and bonding) at room temperature. Excellent dielectric loss and electrical strength properties in both dry and humid environments.

Lamitex® G-3 PF GC 21 glass/phenolic laminated sheet is most frequently preferred for application that require high flexural and impact strengths and good electrical properties under low relative humidity conditions. . Lamitex G-3 meets or exceeds NEMA G-3, Mil-I-24768/18 specifications and meets UL 94-HB requirements.

Rogers RO3000® series bondply is an undensifi ed version of RO3000 laminates that can be used to process highly reliable, homogeneous RO3000 multi-layer boards (MLB’s). The bondply is used in a manner analogous to prepreg in FR-4 constructions and, once bonded, becomes the equivalent of a normal RO3000 core layer.

Resiten® LE (0.062 in Thick) laminates are extremely durable, lightweight, and moisture resistant. they are available in sheet, strip, block, and fabricated parts.Applications are Military Service and Industrial Applications.

ISOVAL® TU 22 (EP GC 22) is a Round rolled epoxy glass fabric laminate tube with high strength even C at elevated temperature for mechanical and electrical applications.

FloLam® surfacing laminates were designed to provide a smooth, resin rich surface over the top of various thermoplastic substrates where esthetics and surface quality are demanded. It is specially engineered to withstand the rigorous processing temperatures of any continuous fiber reinforced thermoplastic materials (CFRTP) systems and thermoplastic sandwich panels. The FloLam® surfacing film and laminate provides a substantial level of protection and surface cleanliness to a broad range of surfaces, even under long term exposure to UV light, moisture and bacteria. With exceptional UV protection, weatherability and abrasion resistance, our FloLam® surface laminate is well suited for many outdoor applications, and typically provide fade resistance and color stability over long-term exposure.

Acculam™ Phenolfab Linen L/LE comprised of a phenolic resin and a woven linen (cotton) substrate. This material qualifies to NEMA L/LE and MIL-I-24768/13/15.This material's improved moisture resistance and machining characteristics allow its use in a wider range of electrical and structural applications than paper grades. Its finer weave fabric also allows for finer machined details& thinner sheets than grades C and CE.

ACP Composites Fiberglass Sheets - Natural are solid, high strength laminates consisting of fiberglass prepreg reinforced with high strength epoxy resin. They are FR4 grade fire retardant and can be safely substituted where G10 is called for. Fiberglass Sheets are Autoclave cured at high temperatures and pressure to ensure a strong, rigid product that cannot be re-shaped after cured. Unlike with a wet layup, Autoclave curing consistently yields flat, lighter weight sheets with minimal voids, waves or buildups.

Vetronite® G-11 Roving is composed of epoxy matrix and glass roving reinforcement. it appears in Yellow brown color with EP GC 205 G-11 Standards.

Delmat® Polyester 68020 is composed of polyester matrix and glass mat reinforcement. it appears in white RAL 9001 color with UP GM 203 GPO-3 Standards.

RO4500™ Series High Frequency Laminates are cost/performance materials from Rogers Corporation, specifically engineered and manufactured to meet the specific demands of the antenna markets. RO4533™, RO4534™, and RO4535™ laminates extend the capabilities of the successful RO4000® product series into antenna applications. This ceramic-filled, glass-reinforced hydrocarbon based material set provides the controlled dielectric constant, low loss performance and excellent passive intermodulation response required for mobile infrastructure microstrip antenna applications.

MICAM CEM-30 is a UL recognized flame retardant CEM-3 copper clad composite laminate offering excellent electrical performance along with good punching characteristics.

Tufnol Grade 10G/40 is a high-quality epoxy resin bonded glass fabric laminate. It offers very high mechanical strength and low moisture absorption, combined with excellent electrical properties, under both dry and humid conditions. They are rigid materials with good dimensional stability and good resistance to a wide range of working environments. This is the most widely used grade, suitable for continuous use at temperatures up to approximately 130°C (Class B).

Toray Toray CFRT® SL2000 / SuperLam, is a reinforced thermoplastic composite laminate. It blends the benefits of a thermoplastic polymer matrix with woven carbon fibers in a twill or plain weave for enhanced performance. The SL-2000/SuperLam style laminate is available in a single-layer product that is ultra-thin, lightweight, and resilient for improved energy return.

Toray Toray CFRT® TL-6000 is a reinforced thermoplastic composite that blends the benefits of a thermoplastic polymer matrix with woven carbon fibers for enhanced performance. Within the product range, 2 layer (MOD1, 2L), 3 layer (3L), or 4 layer (4L) products are available, all ultra-thin, lightweight, and resilient. This material can be drilled, ground, polished and adjusted after being formed with a heated gun. TL-6000 has a smooth high-gloss finish and transparent surface to show woven carbon fiber.

ACP Composites Fiberglass Sheets - Black are solid, high strength laminates consisting of fiberglass prepreg reinforced with high strength epoxy resin. They are FR4 grade fire retardant and can be safely substituted where G10 is called for. Fiberglass Sheets are Autoclave cured at high temperatures and pressure to ensure a strong, rigid product that cannot be re-shaped after cured. Unlike with a wet layup, Autoclave curing consistently yields flat, lighter weight sheets with minimal voids, waves or buildups.

P96/P26 consist of a flame resistant, polyimide resin system suitable for military, commercial or industrial electronic applications requiring superior performance and the utmost in thermal properties. These products utilize a polyimide and thermoplastic blend resin, fully cured without the use of MDA (Methylenedianiline). This results in a polymer with a high Tg without the characteristic difficulties of brittleness and low initial bond strength associated with traditional thermoset polyimides.

VOLTIS® Hp 2061 (PF CP 201) is a Highest mechanical strength, good electric properties at normal humidity.

Tufnol Grade 10G/41 is a high quality epoxy resin bonded glass fabric laminate. It offers very high mechanical strength and low moisture absorption, combined with excellent electrical properties, under both dry and humid conditions. They are rigid materials with good dimensional stability, controlled flammability and good resistance to a wide range of working environments.

Toray Toray CFRT® XTS 3L and 4L are reinforced thermoplastic composite laminates. They blend the benefits of a thermoplastic polymer matrix with uni-directional glass fibers for enhanced performance. The XTS style laminate is offered in 3-layer (0°/90°/0°Fiber orientations) and 4-layer (0°/90°/90°/0°Fiber orientations) construction that is ultrathin, lightweight, and resilient for improved energy return.

Toray Toray Cetex® TC960 is a polypropylene-based thermoplastic uni-directional tape. It is part of Toray’s CFRT® (continuous fiber reinforced thermoplastic) line of industrial thermoplastic composites. This thermoplastic composite is designed for Applicationss that require high impact resistance, but where cost is a factor. The impact toughness of glass fiber/ polypropylene composites make them ideal for use in truck bodies, vehicles, and vehicle enclosures. Polypropylene Thermoplastic Composite. Indefinite at 25°C (77°F).

45NK is a woven Kevlar® aramid fiber reinforced multifunctional epoxy laminate and prepreg systemengineered to provide in-plane CTE values as low as 6 ppm/°C for compatibility with leadless alumina ceramic chip carriers (LCCC's) and other low expansion SMT devices where control of laminate expansion is critical for solder joint reliability. 45NK exceeds the requirements of IPC 4101/50 (Type AFG).

MICAM’s FR-4 flame retardant epoxy-glass copper clad laminate offering excellent mechanical and electrical performance

VOLTIS ME® (MF GC 201) is a Tracking resistant laminate with melamine-resin-impregnated glass fabric, for mechanical and electrical applications. Low flammability.

35N is a pure polyimide laminate and prepreg system for applications requiring high temperature performance. High Tg (250°C) results in low Z-direction expansion for resistance to PTH failure during PWB processing, and minimizes risk of latent PTH defects in-service. Reduced temperature and time to cure offers improved throughput compared to traditional polyimide cycles.