Products in Prepregs & Molding Compounds

SMCarbon® 24CF50-3K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

IS415 is engineered to meet the demands of Lead (Pb) free multilayer printed circuit assembly, deliver CAF resistance with strong IST results and maintain FR-4 processing. IS415 offers good electrical performance, superior chemical and thermal performance and product consistency.

Aekyung Chemical GF-120 is an ortho type UPR.

HexPly® M10R is a formulated epoxy resin which is suitable for low pressure molding processes. HexPly® M10R is very versatile and allows a range of processing temperature from 85°C up to 150°C. HexPly® M10R can be used for very large industrial components subjected to several environmental conditions and exhibits a very long shelf life at room temperature. HexPly® M10R is used extensively for structural marine applications, recreational markets and a wide variety of industrial applications. HexPly® M10R fulfills REACH compliance.

Toray TC275-1 is a dual-cure toughened epoxy prepreg designed to facilitate composite part construction with low pressure or vacuum pressure cures. The resin system features a 14-day tack life and 14-day total out time to allow the construction of thick or larger composite structure. TC275-1 may be cured at a lower temperature of 135°C (275°F) or can be cured at 177°C (350°F) for higher temperature service. 135–177°C (275–350°F) Cure Toughened Epoxy Resin System

Polynt Group SMC 4900 AM is generally used in furniture, home and domestic applications applications.

HexPly® 914 is a highly successful modified epoxy matrix which is used extensively in high temperature resistant primary aircraft structures. The controlled melt viscosity and excellent matrix rheology of HexPly® 914 permits a wide range of processing conditions for high quality components.

AD1000 is a high dielectric constant substrate that permits circuit miniaturization, compared to traditional low loss materials. It is especially beneficial for power amplifiers, filters, couplers and other components using low impedance lines.AD1000 is a woven glass reinforced laminate. This allows for Greater Dimensional Stability and Mechanical Robustness than other 10 Dk Products. Its large panel size is also advantageous for “multi-circuits per panel” processing.

Current Incorporated LAMINATED SHEET NEMA Canvas Electrical Grade (CE) MIL-I-24768/14 is made of woven cotton fabric with a phenolic resin binder. Materials with glass substrates are better suited for electrical applications that require good moisture resistance and mechanical strength. It has good dialectric properties and a medium dielectric loss.

SMCarbon® 90CF60-12K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. This epoxy based SMC is suitable only for application with thickness of 15 mm at maximum.

CEM100 is a cyanate ester prepreg designed to cure at medium temperatures, whilst producing durable components with excellent high temperature performance. It can be supplied on a variety of fabrics to meet your cost and manufacturing requirements.

HTC400 is an epoxy resin system designed to cure at 180°C. It is a toughened epoxy resin system designed for demanding, high temperature applications. It can be supplied on a variety of fabrics and in UD format to meet your cost and manufacturing requirements.

Haysite Reinforced Plastics 14100 are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

menzolit® BMC 0900 is a bulk molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neither does it form droplets nor is smoke generation excessive. The material is injection molded in heated steel molds. It is recommended to work with chrome plated tools. It does not contain any halogens nor any candidates from the REACH SVHC list.

Quantum Composites QC-8700 is a vinyl ester chopped E-glass fiber reinforced ESC® molding compound. It is easily moldable and provides parts that are high strength, fatigue resistant, with high heat resistance. It exhibits unusual toughness, and is suggested for applications subject to impacts and rough handling.

Lectromat Glass Cloth and Mats DG-610 is applied in shrinkable coil armor tape.

Toray Toray CFRT® BW-1000 is a reinforced thermoplastic composite laminate. It blends the benefits of a thermoplastic polymer matrix with woven carbon and glass fibers in a basket weave for enhanced performance. The BW-1000 style laminate is available in a single-layer product; carbon in one direction and glass fibers at a 90° orientation to the carbon that is ultra-thin, lightweight, and resilient for improved energy return.

Renegade Materials Corporation RM-5003 is a low dielectric and loss with high performance prepreg.

Park’s E-752 is a toughened, 365°F cure epoxy system designed for demanding structural applications up to 265°F/wet. E-752 offers a good balance of toughness, high service temperature and good moisture resistance, as well as excellent tack and drape. Formulated for both oven and autoclave cure, E-752 provides for easy processing with oven cure, without sacrificing mechanical properties.

GMS Composites EP – 530 is a flame retardant epoxy resin matrix prepreg with long shelf life. The product has a versatile curing cycle from as low as 80°C or as high as 150°C, thus enabling the product to be used to produce a wide range of composite items, from large structures to numerous small components. EP-530 is available in a range of substrates such as carbon, glass or aramid. The product is self-extinguishing and meets the UL 94 V-0 classification. The flow and tack of EP-530 can also be varied.

SMCarbon® 24CF60-12K/2 is generally used in automotive, industrial sector, leisure and clothing applications.

Glastic® 1580 is one of our Glastic® laminates and offers a superior combination of electrical and mechanical properties. Made from fiberglass-reinforced thermoset polyester resins, these UL®-recognized sheets blend excellent performance characteristics with economy.

IM Carbon Fiber UD150H60-MR60H is a E3 Matrix System with a precursor as PAN.

Toray’s TC250 offers an excellent balance of toughness, mechanical properties, and hot/wet performance. It is easily processed via vacuum bag/oven, autoclave, or press curing operations. Although TC250 is a 130°C (265°F) cure system, it can be post cured for a higher dry and wet Tg, which enhance the product’s elevated temperature performance. TC250 can also be cured or freestanding post cured to 177°C (350°F) to increase its high temperature performance. TC250 is available with virtually all fiber reinforcements in uni-directional tape, slit unidirectional tape, woven, and non-woven prepreg forms. 130°C (265°F) Cure, Toughened Epoxy Resin System

Brandonite® 6510-70A contains feature called Metal-filled composite

Park’s E-766B is a low tack, self adhesive epoxy resin system designed for honeycomb applications. E-766B displays excellent peel properties.

Deltapreg TR43 is a Automotive with tooling Application.

Polynt Group SMC LPMC 7200 Low pressure is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. SMC LPMC 7200 is studied to be molded at low pressure and has been developed for co-molding with phenolic foam. SMC LPMC 7200 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

HexPly® EH25 is a high performance, tough 180°C curing matrix for use in Aerospace primary structures. HexPly® EH25 is a self-extinguishing epoxy resin with controlled flow. HexPly® EH25 prepregs are available with fabric and UD tape.

AMC® 8590-12CFH (Hybrid) is a chopped carbon fiber combination E-glass reinforced ESC® molding compound. It is easily moldable and provides parts that are high strength, fatigue resistant, with high heat resistance and a low density. The carbon fiber is standard modulus PAN based 12K tow.

EF 12 is above 240 °C. High Tg EF12 resin system is used to produce structural prepregs. Optimized cure methods for these resin systems are Press and Autoclave molding.

APCM SG 4528-028AL-105V is a medium weight, conductive, surfacing film composed of a non-woven metallic aluminum mesh impregnated with a toughened epoxy resin plus an ultra light weight veil for outstanding surfacing capability. It is designed for lightning and shielding protection of aircraft, equipotential ground planes and as a counterpoise for antenna installations.

AX-3260EL is an Epoxy Fiberglass Tooling Prepreg.

ACP Composites Carbon Fiber Plain Weave Veneers are an outstanding decorative laminate with a deep, glossy, three-dimensional finish. Manufactured with a clear, resin-rich carbon-fiber prepreg these veneers deliver a smooth, low porosity laminate with a mirror-like finish without the need for a clear coat to enhance the appearance. As the thinnest of our carbon fiber sheets, these veneers are easy to trim and cut. The single layer of 3K plain weave carbon fiber prepreg allow the sheets to be semi-flexible yet remain stiff like cardstock. They can bend in only one direction at a time making it suitable for either flat surfaces or pipes. Once cured, these sheets cannot be re-shaped. Therefore they will not lie flat on compound curves, convex or concave surfaces.Our proprietary Autoclave curing process produces the most consistent and highest quality gloss carbon fiber veneers possible. Manufactured using 100% real carbon fiber fabric pre-impregnated with high quality epoxy resin, these sheets are cured at high temperatures and pressure to ensure a strong, rigid product that cannot be re-shaped after cured. Unlike other manufacturing methods, our Autoclave curing process consistently yields flat, lightweight sheets with minimal voids, waves or buildups. These 1st quality sheets are manufactured with a clear, resin-rich carbon fiber prepreg which results in a smooth, low porosity laminate with a mirror-like finish. Our special blend of high strength epoxy resin guarantees a durable, stronger, longer lasting finish. The built in UV inhibitor in the 2x2 twill prepreg resists UV rays in outdoor applications. There is no need for fillers, gel coats or surface treatments to enhance the surface appearance of our sheets.

Glastic® UTR is one of our Glastic® laminates and offers a superior combination of electrical and mechanical properties. Made from fiberglass-reinforced thermoset polyester resins, these UL®-recognized sheets blend excellent performance characteristics with economy.

Tufnol Grade 10G/44 is a high quality epoxy resin bonded glass fabric laminate. It offers very high mechanical strength and low moisture absorption, combined with excellent electrical properties, under both dry and humid conditions. They are rigid materials with good dimensional stability and good resistance to a wide range of working environments. It has improved retention of strength after heat aging.