Products in Composite Materials: Laminate

Aekyung Chemical SLO-180NT is an ortho type UPR.

Resiten® CMD laminates are extremely durable, lightweight, and moisture resistant. they are available in sheet, strip, block, and fabricated parts.Applications are Military Service and Industrial Applications.

TMM® thermoset microwave materials are ceramic, hydrocarbon, thermoset polymer composites designed for high plated-thru-hole reliability stripline and microstrip applications. TMM laminates are available in a wide range of dielectric constants and claddings. The electrical and mechanical properties of TMM laminates combine many of the benefits of both ceramic and traditional PTFE microwave circuit laminates, without requiring the specialized production techniques common to these materials. TMM laminates do not require a sodium napthanate treatment prior to electroless plating.

Arlon’s TC600 is a woven fiberglass reinforced, ceramic filled, PTFE-based composite for use as a printed circuit board substrate. TC600 is designed to provide enhanced heat-transfer through “Best-In-Class” thermal conductivity, while reducing dielectric loss and insertion loss. Lower losses result in higher Amplifier and Antenna Gains/Efficiencies. Mechanical robustness is also greatly improved for the 6.15 dielectric constant market.

MICAM’s EFR4/AS is a static dissipative flame retardant epoxy material, which has a surface resistivity of 106 to 109 ohms per square, and is suitable for use in test fixtures.

FR406 No-Flo and FR406 Lo-Flo® products bring the fabricator specific thermal characteristics appropriate for use in heat sink bonding, die cavity board (direct chip attachment) and multilayer rigid-flex applications.

Toray Toray CFRT® AG18-2L is a reinforced thermoplastic composite laminate. It blends the benefits of a thermoplastic polymer matrix with woven glass fibers in a plain weave for enhanced performance. The AG-18 2L style laminate is available in a dual-layer product with glass fibers in both directions (0° & 90°). This construction is ultra-thin, lightweight, and resilient for improved energy return.

CuClad 250(Er=2.40–2.60) uses a hi gher fiberglass/PTFE ratio to prov ide mechanical properties approac hing those of conventional subs trates. Better di mensional stabi lity and lower thermal expansi on in all di rections are other si gnificant benefi ts. The el ectrical properti es of CuCl ad 250GT and CuClad 250GXare tested at 1MHz and 10GHz respectively. For cri tical perform ance appli cations, CuCl ad products may be specified with an “LX” testing grade; this designates that each sheet will be tested individually, and a te st report will be issued with the order.

The AD Series™ antenna materials from Rogers Co rporation are high performance, specialty materials that are specifically engineered and manufactured to meet the demands of today’s wireless antenna markets. Increased antenna performance requirements are a constant trend in the market today. Rogers has the materials needed to meet the design needs of this market both today and into the future.

MICAM’s EG-10 Grade is a G-10 epoxide resin laminate, based on a medium weave glasscloth, with excellent machining and punching characteristics.

Aekyung Chemical LS-102 is an ortho type UPR.

INBORD® EGS is a phenole/melamine laminate having a Tracking index CTI 600 for switchgear with improved safety in case of arcing, with additional glass cloth reinforcement.

ISOVAL® TU 21/FR4 (EP GC 21) is made up of Flame-resistant, halogen-free round rolled epoxy glass fabric laminate tube with high strength for mechanical and electrical applications

Vetronite® EGS 619 is composed of epoxy matrix and glass fabric reinforcement. it appears in Light green color with EP GC 202 FR-4 Standards.

VOLTIS® Hp TU 21 (PF CP 21) is a Round rolled phenolic paper laminate tube for mechanical and electrical applications.

IS415 is engineered to meet the demands of Lead (Pb) free multilayer printed circuit assembly, deliver CAF resistance with strong IST results and maintain FR-4 processing. IS415 offers good electrical performance, superior chemical and thermal performance and product consistency.

Aekyung Chemical GF-120 is an ortho type UPR.

AD1000 is a high dielectric constant substrate that permits circuit miniaturization, compared to traditional low loss materials. It is especially beneficial for power amplifiers, filters, couplers and other components using low impedance lines.AD1000 is a woven glass reinforced laminate. This allows for Greater Dimensional Stability and Mechanical Robustness than other 10 Dk Products. Its large panel size is also advantageous for “multi-circuits per panel” processing.

Current Incorporated LAMINATED SHEET NEMA Canvas Electrical Grade (CE) MIL-I-24768/14 is made of woven cotton fabric with a phenolic resin binder. Materials with glass substrates are better suited for electrical applications that require good moisture resistance and mechanical strength. It has good dialectric properties and a medium dielectric loss.

Toray Toray CFRT® BW-1000 is a reinforced thermoplastic composite laminate. It blends the benefits of a thermoplastic polymer matrix with woven carbon and glass fibers in a basket weave for enhanced performance. The BW-1000 style laminate is available in a single-layer product; carbon in one direction and glass fibers at a 90° orientation to the carbon that is ultra-thin, lightweight, and resilient for improved energy return.

Glastic® 1580 is one of our Glastic® laminates and offers a superior combination of electrical and mechanical properties. Made from fiberglass-reinforced thermoset polyester resins, these UL®-recognized sheets blend excellent performance characteristics with economy.

ACP Composites Carbon Fiber Plain Weave Veneers are an outstanding decorative laminate with a deep, glossy, three-dimensional finish. Manufactured with a clear, resin-rich carbon-fiber prepreg these veneers deliver a smooth, low porosity laminate with a mirror-like finish without the need for a clear coat to enhance the appearance. As the thinnest of our carbon fiber sheets, these veneers are easy to trim and cut. The single layer of 3K plain weave carbon fiber prepreg allow the sheets to be semi-flexible yet remain stiff like cardstock. They can bend in only one direction at a time making it suitable for either flat surfaces or pipes. Once cured, these sheets cannot be re-shaped. Therefore they will not lie flat on compound curves, convex or concave surfaces.Our proprietary Autoclave curing process produces the most consistent and highest quality gloss carbon fiber veneers possible. Manufactured using 100% real carbon fiber fabric pre-impregnated with high quality epoxy resin, these sheets are cured at high temperatures and pressure to ensure a strong, rigid product that cannot be re-shaped after cured. Unlike other manufacturing methods, our Autoclave curing process consistently yields flat, lightweight sheets with minimal voids, waves or buildups. These 1st quality sheets are manufactured with a clear, resin-rich carbon fiber prepreg which results in a smooth, low porosity laminate with a mirror-like finish. Our special blend of high strength epoxy resin guarantees a durable, stronger, longer lasting finish. The built in UV inhibitor in the 2x2 twill prepreg resists UV rays in outdoor applications. There is no need for fillers, gel coats or surface treatments to enhance the surface appearance of our sheets.

Glastic® UTR is one of our Glastic® laminates and offers a superior combination of electrical and mechanical properties. Made from fiberglass-reinforced thermoset polyester resins, these UL®-recognized sheets blend excellent performance characteristics with economy.

Tufnol Grade 10G/44 is a high quality epoxy resin bonded glass fabric laminate. It offers very high mechanical strength and low moisture absorption, combined with excellent electrical properties, under both dry and humid conditions. They are rigid materials with good dimensional stability and good resistance to a wide range of working environments. It has improved retention of strength after heat aging.

Resiten® LEM400 laminates are extremely durable, lightweight, and moisture resistant. they are available in sheet, strip, block, and fabricated parts.Applications are Military Service and Industrial Applications.

ISOVAL® R (EP GC 205) is made of glass roving fabric using the temperature-resistant ISOVAL® epoxy resin system. This gives the material excellent heat resistance and chemical resistance as well as a permanent temperature resistance of over 180 °C according to IEC 216. It is made With glass roving fabric, similar to ISOVAL 11, but for larger parts, Thermal Class H (180 °C).

Acculam™ Epoxyglas G11/FR5 comprised of flame retardant/heat resistant epoxy resin and a woven fiberglass substrate. It qualifies to NEMA FR5 and MIL-I-24678/28.This material exhibits extremely high mechanical strength at elevated temperatures. It shows good dielectric loss and electric strength properties under both dry and humid conditions. It has good chemical resistance and low moisture absorption.

Polyply Composites Polyply L-50HT is a track resistant and high temperature laminate. All grades of Polyply industrial sheet are produced using polyester resin and fiberglass reinforcement and it is U.L recognized.

Atlas Fiber G-3 Sheet is an amber/brown material with a glass fabric reinforcement in a phenolic resin binder. G-3 is probably the strongest overall laminate with excellent tensile, compressive, impact, and flexural strength at elevated temperature.

Acculam™ Phenolkraft Paper X/XX comprised of a phenolic resin binder and a saturating kraft (paper) substrate. It qualifies to NEMA X/XX and MIL-I-24768/11/12.This is a general purpose grade with good mechanical and electrical insulating properties. Its versatility, good machining characteristics and lower cost encourage its applications as switch plates, barriers, terminal strips, washers and other electrical components.

Beijing New Friend Insulation Material F890H_H grade halogen - free is free flame retardant with leakage resistant laminates.

VOLTIS® Hgw TU 21 (PF CC 21) is a Round rolled phenolic fine weave cotton fabric laminate tube with high toughness for mechanical applications, excellent machinability.

Tufnol Grade 6F/45 Round Rod epoxy cotton grade has a unique combination of properties, which makes it particularly useful for applications requiring extra performance. It has good all-round performance but its principal features are its excellent electrical properties, good dimensional stability and outstanding machinability.

Toray Toray Cetex® TC930 is a thermoplastic composite using a high density polyethylene (HDPE) matrix. This product is commonly used in pipe overwrapping Applicationss because of its high hoop strength, low modulus, and excellent chemical resistance. Toray Cetex® TC930 is available in a pigmented glass-reinforced tape. Indefinite at 25°C (77°F).

IS550H was developed in conjunction with a consortium of industry experts for high power & high voltage applications and PEV & HEV automotive electrification. The resulting solution addresses critical application needs for use in a harsh environment where very demanding, long term thermal reliability performance, extreme thermal cycling and very high voltage CAF & electro-migration resistance is required.

Delmat® Polyester 68010 GPO-3 is composed of polyester matrix and glass mat reinforcement. it appears in RED RAL 9001 color with UP GM 203 GPO-3 Standards.