Products in Ready-to-Use Products: Solvent free (100% Solids) Adhesive

WACKER® HA - Hybrid Adhesive is a high-strength, silicone-free all-purpose adhesive suitable for bonding or repairing many different substrates. It cures at room temperature in the presence of atmospheric moisture to form a permanent hard rubber. The adhesive is almost odorless, non-corrosive, and non-staining. It can be painted over and is weatherable, making it highly resistant to various media such as mineral oils, solvents, acids, and alkalis.

DEHESIVE® PSA 765 KR is a solvent-free, addition-curing silicone pressure-sensitive adhesive designed for low adhesion levels. It serves as a general-purpose adhesive, primarily intended for coating films but also suitable for other substrates. This product utilizes a thermal-curing system and achieves curing at a web temperature range of 100-200 °C.

CHT Group QSil 559 is a 100% silicone solid elastomer designed for electrical potting applications. This addition-cure potting material is a two-component system that has a long gel time. It offers a hard, thermally conductive, low-modulus material that is readily repairable.

CHT Group QSil 216 is a transparent and colorless silicone formulation that is ideal for optical applications. Its viscosity profile enables excellent flow around components, and it is excellent for potting complex parts. The chemical composition results in a cured product that is hydrolytically stable as well as reversion-resistant. The silicone elastomer provides electrical insulation and physical shock resistance for components and enables environmental protection.

CHT Group QSil 553 is a 2-component silicone elastomer system specially designed for electronic potting and encapsulation applications. It offers good protection against chemicals, environmental contamination, mechanical shock, vibration, and impact damage. It can be employed in areas where low flammability is a prerequisite. The cured elastomer can be repaired. The component parts have relatively low viscosities and are readily mixed, either by hand or machine.

CHT Group QSil 550LV A&C is a 100% silicone solids elastomer designed for electronic potting applications. This addition-cure potting elastomer is a two-component system that offers a hard, thermally conductive, low-modulus material that is readily repairable. It cures at room temperature.

CHT Group QSil 573 is a 100% silicone solid elastomer designed for electronic potting applications. This addition-cure potting elastomer is a two-component system that offers a hard, thermally conductive, low-modulus material that is readily repairable. This product has excellent thermal conductivity.

DEHESIVE® PSA 765 is a solvent-free, addition-curing silicone pressure-sensitive adhesive specifically designed for low adhesion levels. It is primarily intended for coating films but can also be used on other substrates. This product utilizes a thermal-curing system that achieves curing at a web temperature of 100-200 °C.

CHT Group SilSo Clear 21002 is a transparent and colorless silicone formulation that is ideal for optical injection molding applications. Its viscosity profile enables excellent flow around components, and it is excellent for potting complex parts. The chemical composition results in a cured product that is hydrolytically stable as well as reversion-resistant. The silicone elastomer provides electrical insulation and physical shock resistance for components and enables environmental protection.

ARCOR® EE-95 is a solvent-free epoxy Novolac, specially formulated as an exceptional rebuilding material for metals in immersion service. It is the ideal choice for restoring or cladding applications, offering reliable corrosion and abrasion protection for condensers, heat exchangers, and FGD units. With its high-performance features, ARCOR® EE-95 can be applied up to an impressive thickness of 500 mils without experiencing any slump. Count on the superior durability and effectiveness of ARCOR® EE-95 to ensure the long-lasting integrity of your equipment in challenging environments. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® 2213 Stick is a convenient, solvent-free, two-component epoxy paste packaged in an easy-to-use stick form, combining both the Activator and Base components. With a simple cut or twist, a desired amount can be easily extracted and kneaded using gloved fingers. This rapid-curing epoxy is particularly well-suited for emergency repairs, allowing for quick fixes when time is of the essence. ARCOR® 2213 exhibits corrosion resistance and is reinforced with steel for excellent wear resistance. It can be further modified to meet specific requirements as it can be sanded, drilled, tapped, filed, and machined. Furthermore, it is compatible with epoxy, urethane, or acrylic paints, offering versatility in the choice of final finishes. Choose ARCOR® 2213 Stick for its convenience, durability, and efficiency in handling emergency repairs with excellent wear resistance and a wide range of applicability. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® EE-951 is a solvent-free epoxy with a high 3.6 functionality Novolac composition, specifically designed as a top-tier rebuilding material for metals in highly aggressive chemical and temperature immersion service. With its exceptional properties, ARCOR® EE-951 is ideally suited for restoring or cladding applications, providing unmatched corrosion and abrasion protection. The versatility of ARCOR® EE-951 allows for easy application up to an impressive 500 mils, without any concerns of slump. Experience the reliability and effectiveness of ARCOR® EE-951, delivering unparalleled durability and safeguarding against the harshest conditions for your metal surfaces. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® EE-951 HT is a solvent-free, high 3.6 functionality epoxy Novolac that serves as an exceptional rebuilding material for metals in highly aggressive chemical and temperature immersion service. Designed with precision, ARCOR® EE-951 HT is an ideal choice for restoration or cladding purposes, providing superior corrosion and abrasion protection. With its remarkable application flexibility, ARCOR® EE-951 HT can be applied up to an impressive 500 mils without any concerns of slump. Experience the reliability and performance of ARCOR® EE-951 HT, delivering outstanding protection and durability for your metal surfaces in the most demanding and challenging environments. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® EE-97 is a solvent-free, two-component rebuilding compound specifically designed to repair damaged, cracked, or worn metal surfaces. This non-sagging compound exhibits excellent adhesion to all metal surfaces and can be machined using carbide or high-speed cutting tools. With its impressive wear, abrasion, and impact resistance, ARCOR® EE-97 is a reliable choice for addressing various surface imperfections. As a Novolac Epoxy, it offers superior resistance in a wide range of chemical environments and can withstand temperatures up to 450ºF. Whether it's drilling, tapping, or sanding, this versatile compound provides a durable and machinable solution for restoring metal surfaces to their original strength and functionality. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® EE-96 is a solvent-free, two-component rebuilding compound specifically formulated to provide high wear and abrasion resistance. It serves as an ideal rebuilding and repair material for metals that have been damaged by corrosion, erosion, abrasion, or cavitation. With its exceptional durability, ARCOR® EE-96 is particularly well-suited for high-wear flooring applications in aggressive wear and impact zones, offering a reliable non-skid surface. This non-sagging compound maintains its integrity up to 200 mils without shrinking during the curing process. It exhibits excellent adhesion to both metal and concrete surfaces, ensuring a robust bond. As a Novolac Epoxy, ARCOR® EE-96 demonstrates excellent resistance in a wide range of chemical environments and can withstand heat up to 450ºF. Choose ARCOR® EE-96 for a dependable rebuilding compound that provides exceptional wear resistance, protects against corrosion and erosion, and maintains structural integrity in demanding environments. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® EE-99KC is an Epoxy Rebuild compound designed for rapid set and cure, making it comparable to our EE-94 in resin design. It features a similar loading and mesh size of Ceramic Beads, ensuring high performance. With its self-wetting formulation, this compound can be applied without a primer and is suitable for vertical and overhead applications up to +3/4″ (750 mils, 18.75mm) thickness. It can be easily leveled to a smooth finish, eliminating the need for a topcoat and significantly reducing application and turnaround time. ARCOR® EE-99KC offers a convenient 2:1 mix ratio by weight and volume, making it ideal for easy breakdown in-field. Its rapid curing properties allow for a return to service in as little as 1 hour, ensuring minimal downtime. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® EE-94 HW is an enhanced wear/impact version of EE-94, offering improved chemical and temperature performance. This high-quality epoxy, filled with high density ceramic beads, delivers the utmost level of chemical, heat, and abrasion resistance available in an epoxy system. With its self-wetting formulation, it can be applied directly without the need for a primer. Additionally, it can be applied at a thickness of up to +1" (1000 mils, 25mm) on vertical and overhead surfaces. The compound can be leveled smoothly, eliminating the need for a topcoat and significantly reducing application and turn-around time. ARCOR® EE-94 HW is the ideal choice for applications requiring exceptional durability and quick installation. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® EE-93 is a solvent-free, two-component rebuilding compound specifically designed to withstand high levels of abrasion, erosion, and cavitation. This remarkable product is a Novolac Epoxy filled with spherical cubic zirconium, providing it with the utmost chemical, heat, and abrasion resistance achievable in an epoxy system. Its self-wetting formulation allows for application without the need for a primer, and it can be smoothly leveled to achieve a seamless finish, eliminating the requirement for a top coat. ARCOR® EE-93 significantly reduces application and turnaround time while delivering exceptional performance. It is the ideal choice for environments that demand superior durability and efficiency. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® EE-99 is a solvent-free, two-component epoxy rebuild that is moisture insensitive. It serves as an exceptional emergency repair or bonding material for metals, glass, concrete, or wood. With a quick setting time of just 5 minutes, ARCOR® EE-99 can be put into service within 1 hour, regardless of temperature. This versatile epoxy exhibits good resistance to a wide range of chemical environments and can withstand heat up to 450ºF. The convenient 1:1 mix ratio makes it easy to use, and it can be applied overhead or vertically. ARCOR® EE-99 is a reliable and efficient solution for various repair and bonding applications. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® EE-92 is an Epoxy Rebuild compound that closely resembles our EE-94 variant in terms of resin and amine composition, with the distinction of incorporating smaller mesh Ceramic Beads. By combining these high crush strength ceramic beads with the addition of robust Kevlar fibers, EE-92 exhibits an exceptional level of impact, abrasion, and compressive strengths. This self-wetting formulation allows for application without the need for a primer and can be efficiently applied at a thickness of up to +1/2" (500 mils, 12.5mm) on both vertical and overhead surfaces. Moreover, it can be easily leveled to achieve a smooth finish, eliminating the requirement for a topcoat and significantly reducing application time and turnaround. ARCOR® EE-92 offers a highly convenient 1:1 Mix Ratio, whether by weight or volume, making it well-suited for efficient breakdown in the field. Similar to our 8506 variant, EE-92 delivers comparable application properties, appearance, and texture. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® 25551 Quick-Set is a solvent-free, two-component epoxy adhesive that is moisture insensitive. Designed for emergency repairs or bonding applications, it is suitable for use on metals, glass, concrete, or wood surfaces. With its quick-setting formula, ARCOR® 25551 Quick-Set sets in just 5 minutes and can be put into service within 1 hour, regardless of the ambient temperature. This adhesive exhibits good resistance to a wide variety of chemical environments and offers heat resistance up to 450ºF. Its easy-to-use 1:1 mix ratio simplifies the application process, and it can be applied overhead or vertically. For convenient use, ARCOR® 25551 Quick-Set is packaged in two tubes containing resin and hardener. To achieve optimal results, simply squeeze equal portions onto a nonporous surface and thoroughly mix them together. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® EE-94 is a solvent-free, two-component rebuilding compound specifically designed for harsh environments with high abrasion, erosion, and impact. This remarkable compound is a Novolac Epoxy filled with ceramic beads, providing the utmost level of chemical, heat, and abrasion resistance achievable in an epoxy system. With its self-wetting formulation, it can be applied directly without the need for a primer. It is also capable of being applied at a thickness of 1" (1000 mils) on both vertical and overhead surfaces. Furthermore, ARCOR® EE-94 can be easily leveled to achieve a smooth finish, eliminating the requirement for a topcoat. By doing so, it significantly minimizes application time and turnaround. ARCOR® EE-94 is the ideal choice for applications demanding superior durability and efficiency. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

125-31FPC is a syringe dispensable, 100 % solids, thermally conductive, electrically insulating, pre-catalyzed epoxy adhesive. This system features excellent thermal stability, outstanding chemical resistance and excellent high temperature properties. Unlike conventional thermally conductive epoxy adhesives, 125-31FPC is flexible and is able to absorb stress when bonding mismatched CTE substrates. Applications include die attachment, printed circuit board fabrication, advanced material composites, LED attachment and heat sink bonding. 125-31FPC is a finer particle version of 125-31C.Features Highly thermally conductive epoxy adhesive B-Stageable Low temperature curing

122-39(SD) is a syringe dispensable, thermally conductive, electrically insulating, one component, 100% solids epoxy adhesive. This system features excellent thermal stability, outstanding chemical resistance and excellent high temperature properties. Applications include adhesion to gold plated substrates and tin/lead solder terminated components, die attach and thermal management operations, printed circuit board fabrication, advanced material composites, sealing and high performance coatings. 122-39(SD) is a thermally conductive version of 122- 38(SD).Features Ionically clean die attach adhesive

125-35C is a syringe dispensable, 100 % solids, thermally conductive, electrically insulating, precatalyzed, epoxy adhesive. This system features excellent thermal stability, outstanding chemical resistance and excellent high temperature properties. Unlike conventional thermally conductive epoxy adhesives, 125-35C is flexible and is able to absorb stress when bonding mismatched CTE substrates. Applications include die attachment, printed circuit board fabrication, advanced material composites, LED attachment and heat sink bonding. This is an electrically insulating, thermally conductive version of 124-08C.Features Highly thermally conductive epoxy adhesive

127-31 is an extremely flexible one-component, syringe dispensable, 100% solids, thermally conductive, electrically insulating soft epoxy adhesive, encapsulant, and potting compound. This system features excellent thermal stability, chemical resistance and excellent high temperature properties. Unlike conventional thermally conductive epoxy adhesives, 127-31 features a low durometer and is highly flexible allowing it to absorb stress when bonding mismatched CTE substrates. 127-31 even displays some elastomeric properties. Applications include die attachment, printed circuit board fabrication, advanced material composites, LED attachment and heat sink bonding.Features Elastomeric Flexible thermally conductive adhesive/potting compound

122-38(SD) is a single component, silver filled, syringe dispensable, 100% solid, electrically conductive, epoxy adhesive. 122-38(SD) provides for fine pitch resolution, when syringe dispensed, stencil printed, or screen-printed. This system features excellent thermal stability, outstanding chemical resistance and excellent high temperature properties. Applications include adhesives, die attachment, printed circuit board fabrication, advanced material composites, sealing and high performance coatings. 122-38(SD) provides excellent adhesion to gold plated substrates, as well as tin/lead solder terminated components.Features Ionically clean die attach adhesive

TerraMax 925 is an all-in-one, single step, advanced polymer floor adhesive. The high performance formula drastically reduces the installation time. It delivers superb bond & shear strength in an easy spread, easy clean-up product that requires no mixing or set up time. TerraMax 925 High Performance Wood Floor Adhesive contains no water or solvents and very low VOCs, so it’s easy on installers and the environment. This is the product of choice when the application demands the highest performance adhesive available.

ME 8155-M is a version of ME 8155 modified to provide extra flexibility while maintaining all electrical and bond strength. It is a reworkable, solvent fsilver-filledilled paste that is electrically and thermally conductive. It exhibits outstanding flexibility for bonding materials having highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper). This paste can be used for screen printing and it can be readily reworked at 80-100°C.

EG7635 is a alumina filled, electrically insulating and thermally conductive rigid epoxy paste adhesive. While bonding at ambient temperature can be achieved overnight, elevated temperatures will accelerate curing, exponentially. EG7635 high thermal conductivity and high strength makes it excellent for bonding substrates, components and heat sinks where thermal management is critical. It has more than 15 years of proven records of providing bonding to difficult substrates. EG7635 exibits reduced bond strength at 80-100°C for easier rework.

Chicago Glue & Machine HME0736 is a high performance general purpose hot melt designed for increased mileage, improved run-ability and good adhesion to a variety of paper and paperboard surfaces for case, carton and tray sealing packaging and paper converting applications.

ME8512 is designed for automated, inline processing. This single component, silver filled paste is solvent free, electrically and thermally conductive. It is highly thixotropic with minimal sag. ME8512 has been designed to eliminate bleeding on both silver plated copper and alloy 42 leadframes.

ME 8452 is a reworkable, solvent free, pure silver filled, electrically and thermally conductive epoxy paste adhesive. It exhibits outstanding flexibility for bonding materials having highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper). It can be readily reworked from 80°C to 100°C. It is ideal for applications such as large area die attach and substrate attach because of its ability to bond materials with highly mismatched CTE.

Chicago Glue & Machine HMM9932 is a high performance general purpose hot melt designed for increased mileage, improved run ability and good adhesion to a variety of paper and paperboard surfaces for case, carton and tray sealing packaging and paper converting applications.

ME8452-A is an accelerated version of ME8452 for snap-curing applications.This novel silver-filled paste is reworkable, solvent free, and electrically and thermally conductive. It exhibits outstanding flexibility for bonding materials having highly mismatched CTE'S (i.e., alumina to aluminum, silicon to copper). It can be readily reworked from 80°C to 100°C and is ideal for applications such as large area die attach and substrate attach because of its ability to bond materials with highly mismatched CTE.