Products in Ready-to-Use Products: Solvent free (100% Solids) Adhesive

Westech Aerosol Corp. WT-HP15 is specifically formulated as a high strength/temperature industrial adhesive applicable to a variety of substrates. Our original formula, this high strength, high temperature resistant adhesive contains methylene chloride for a strong and lasting bond.

Westech Aerosol Corp. WT-NFHS is a non-flammable high strength spray adhesive which is completely non-flammable and non-methylene chloride, this adhesive has all the properties of HP and is appropriate for areas where flammability is a concern. This product is formulated as a high strength/temperature and non-flammable solvent-based adhesive for industrial use.

Jowapur® 687.60 is a stable and fiber-reinforced, thixotropic one-component adhesive, curing with wood moisture or ambient humidity. Adhesive for bonding soft wood species, windows, doors, construction elements, water-resistant particleboard, foam and insulation materials made of concrete, cork and coated cork, tiles, stone and many other substrates.

Atom Adhesives AA-BOND 2123 is a versatile steel metal/epoxy adhesive formulation developed for modern industrial repair, casting and bonding applications where a steel-like or cast iron finish is required.

Applied Products AP9105 is a high performance, solvent-free, ultra-low VOC (<500 PPM) acrylic pressure-sensitive adhesive with an excellent balance of peel, tack and shear characteristics. It has an adhesive thickness of 5 mil & 160 oz/in width of adhesion to steel.

Atom Adhesives AA-BOND 28 is a two part, heat-resistant and low exotherm, epoxy adhesive formulation. It is a 100% solid epoxy adhesive, with superior chemical resistance and shear strength. This industrial grade product does not have a strong odor and is widely used in all industries.

Atom Adhesives Leather-Bond 1 is an exceptional epoxy formulation recommended for lower temperature or wet industrial bonding applications where fast curing is required.

DriTac Flooring Products 9100 Contractor's Choice is a contractor grade, polymeric resin wood flooring adhesive formulated for wet-lay installations. Installers must lay wood into the adhesive immediately after troweling.

Aptek® 2717-A/B is a two component, black, low modulus, thixotropic, silicone adhesive displaying very low temperature flexibility and good physical strength properties. Aptek® 2717-A/B has been designed to fully cure at room temperature and can be accelerated with a brief low temperature cure. This 100% solids system has been manufactured with highly pure resins to minimize the occurrence of ionic contamination without outgassing during cure or service.

#983B is a latex adhesive base. It is used in high solids water based adhesive for bonding various substrates.

Polytec TC 417 2 is a two component, thermally conductive, electrically insulating epoxy It is used in various thermal management applications, especially for potting of large volumes. Polytec TC 417 2 has an excellent chemical and moisture resistance It has an excellent adhesion to glass, metal, ceramic, FR 4 and most plastics. The room temperature cure allows to bond temperature sensitive substrates very conveniently The material can be applied via dispensing or manual application.

Capitol Adhesives MP240 Mid Grade Carpet and Sheet Vinyl Adhesive is a water-based multi-purpose adhesive for the installation of felt-back sheet vinyl and most carpets in residential or medium commercial installations. Its wet grab is great for carpets but allows alignment of sheet vinyl floors without tearing the back. This product is protected by AMP Guard®, an anti-microbial protection system that inhibits the growth of mold, mildew and odor-causing bacteria in both wet and dry adhesive.

Jowapur® 687.22 is a adhesive for soft wood species, also with high moisture content, for bonding mineral aggregate panels, fiberboard and pur foam, compound elements and timber which is used for instance for the manufacture of wooden windowframes and garden furniture.

Mactac CleanTape LV820 Low VOC Acrylic Double Coated Tape 72# White PCK CB4181-72 consists of a.5mil PET carrier coated on both sides with 1.8 mils of clean, aggressive acrylic pressure sensitive adhesive. The adhesive is protected by either a two-side silicone coated 80# natural polycoated Kraft liner or a 72# White polycoated liner. This product is designed for applications that benefit from a clean, chemically inert adhesive tape.

ADBOND 5635B is a liquid polyurethane mono-component adhesive that vulcanise with moisture. It is used to bond rigid insulation polyurethane foam, expanded or extruded polystyrene, wood, cardboard honeycomb, particle panel, MDF, or certain plastics. Used for bonding between two flexible materials or a flexible and a rigid material. Never used for bonding two rigid materials. For assemblies involving stainless steel, galvanized steel, or aluminum use ADBOND 5645 SERIES.

Adesiv SRL Euro Gold is a 2 component, water-free epoxy-polyurethane adhesive for gluing wooden floors to cement screeds or preexisting non-absorbent floors (marble, tiles, palladian, wooden substrates).

Atom Adhesives Iron-Bond (Rigid Staking Compound Epoxy Adhesive) is a two part, heat-resistant and low exotherm, epoxy adhesive formulation. It is a 100% solid epoxy adhesive, with superior chemical resistance and shear strength. Iron-Bond contains a thixotropic agent which impedes thinning out of the material during heat cure when properly mixed and cured.

DELO DUALBOND® AD 4930 is a modified acrylate , 1C , UV- / Vis a - / humidity-curing free of solvents , unfilled & dual-curing.

ADBOND 5635H-6K is a liquid polyurethane mono-component adhesive that vulcanises with moisture. It is used to bond rigid insulation polyurethane foam, expanded or extruded polystyrene, wood, cardboard honeycomb, particle panel, MDF, or certain plastics. Used for bonding between two flexible materials or a flexible and a rigid material. Never used for bonding two rigid materials

Turftak 2 is a performance-grade, two-component polyurethane adhesive that delivers maximum control over the bonding process. This innovative new artificial turf adhesive is perfect for installations in a wide range of weather conditions and solves a longstanding problem of varying heat and humidity in ever changing outdoor installation environments.

DURACLAD ECS C-307 FS is a fast setting tile adhesive.

Helmicol 3041 is a fast reacting two-component solvent-free, epoxy nose caulking adhesive formulated for use with rubber and vinyl stair treads. Helmicol 3041 may also be used to permanently install luxury vinyl tile and plank flooring, resilient sheet vinyl flooring, rubber tile flooring and rubber sheet flooring and rubber and vinyl stair treads. Helmicol 3041 has been formulated to produce a superior, hard setting bond required for use in high traffic applications. May be used over properly prepared porous and non-porous surfaces such as concrete, underlayment grade plywood, cementitious based patching compounds and levelers.

Applied Technologies 5902 Silver Epoxy is a high solids, two component, silver filled epoxy designed for easy noncritical 1:1 mixing and quick cure responses at room temperature (20-25 °C), or low heat (100°C). Applications include printed circuit board repairs, electrical solder replacement, chip bonding, die attachment, static discharge/ grounding, thermal dissipation, and use as a general electrically conductive cement for heat sensitive components. This material exhibits outstanding adhesion to a variety or substrates including ceramic, glass, metal, and plastic.

Duropoxi is a two-component, 100% solids, chemical resistant, exterior grade epoxy adhesive. Non-sag gel epoxy.

Adesiv SRL Pelpren PL6-G is a two-component epoxy-polyurethane adhesive with single coating for rubber flooring, rubber agglomerate sports fields, athletic tracks, synthetic grass, PVC and LVT.

Helmicol 3031 is a two-component solvent-free, epoxy nose caulking adhesive formulated for use with rubber and vinyl stair treads. Helmicol 3031 is designed to fill the void between the nosing of the stair tread and the nosing of the step. Helmicol 3031 may also be used to permanently install luxury vinyl tile and plank flooring, resilient sheet vinyl flooring, rubber tile flooring and rubber sheet flooring and rubber and vinyl stair treads. Helmicol 3031 has been formulated to produce a superior, hard setting bond required for use in high traffic applications. May be used over properly prepared porous and non-porous surfaces such as concrete, underlayment grade plywood, cementitious based patching compounds and levelers.

DURAL 452 MV is a two-component, 100% solids, moisture insensitive, high strength epoxy adhesive and binder for numerous applications. This high modulus, medium viscosity epoxy resin is the perfect solution for bonding new, plastic concrete to existing concrete slabs and steel.

Pilgrim Permocoat EM CBC IV Gel is a versatile system with excellent physical properties that make its consideration a requisite in many situations involving new construction or repair of concrete. EM CBC IV has a 35 year record of excellent performance. Used neat, it is an outstanding adhesive... mix it with an aggregate and you have a trowelable , no-shrink mortar for patching & topping, for splicing concrete pilings, for leveling heavy equipment and for anchoring bolts or re-enforcing steel. Use as a bonding adhesive between plastic concrete and hardened concrete.

Adesiv SRL Euro 5 is a Twocomponent, water-free epoxy-polyurethane adhesive with very low VOC emissions, specific for gluing wooden floors of any type on cementitious substrates or on pre-existing non-absorbent floors (marble, tiles, palladian, wooden substrates). On pre-existing poorly or non-absorbent substrates, always provide for an appropriate abrasion of the surface, followed by adequate cleaning, before proceeding with gluing.

Aptek® 2713-A/B is a two component, silver filled, electrically conductive soft paste adhesive. It is designed to bond many dissimilar substrates and dissipate device generated heat. Aptek® 2713-A/B is a 100% solids, solvent free system that will not form voids during cure or outgas after being fully cured.

Chem-Mat Technologies Inc. EC200LV is the conductive adhesive and thermally conductive adhesive which is widely used in optoelectronics, general electronic motors, and the electrical and thermal conductivity products required by the industry. Such as integrated circuit bonding, LED chip bonding, fixing of automotive motor diodes, etc. EC200LV is also suitable for conductive and thermally conductive coating and bonding of metals, ceramics, glass and other materials.

ResinLab® RC8035 anaerobic retaining compounds are designed for use in demanding applications to fill the spaces and surface irregularities between tightly mated cylindrical parts. These products form a tough permanent bond which greatly enhances the torque and pullout strength. They are single component solvent free materials manufactured in a wide variety of viscosities and setting times to satisfy specific bonding applications. This technology increases the reliability and performance of assemblies while reducing dependence upon maintaining costly tight machining tolerances.

Melos PC 21-030 is a solvent-free, two-component polyurethane-based adhesive. PC 21-030 is used to adhere backing tapes to artificial turf systems.

Capitol Adhesives VA380 Premium Vinyl Composition Tile Adhesive dries clear so that chalk lines are visible for easy installation and alignment of tiles. VA380 Premium Vinyl Composition Tile Adhesive is protected by AMP Guard®, an anti-microbial protection system that inhibits the growth of mold, mildew and odor-causing bacteria in both wet and dry adhesive.

Forzal 8020 is a mono component (-NCO) solvent free polyurethane-based adhesive.