Products in Composite Materials: Surface Finish

EPOVIA ISO SP - Isophthalic based Gel Coat,available in white or color variants. Main Applications areas are Aeolian,Agrochemical,Agrobusiness,Furniture,Solvents etc.

POLYCOR® ISO BR - Light stabilized accelerated isophthalic gel coat base with medium reactivity.It is used in general purpose applications,marine,sanitary,etc…

Polycor® 944 Neutral Base isophthalic gel coats are high quality coatings developed for the fiberglass industry. These gel coats provide quality finishes, which deliver good chemical/water resistance, gloss retention, weatherability, and resiliency. These gel coats are formulated to meet the rigid requirements of transportation, boating, and sanitary applications. They have enabled customers to meet and surpass all requirements of the American national standard for plastic bath tubs, shower receptors and shower stalls, ANSI Z124.1, .2 -1995, sec. 6.1.1. 944 gel coats are ready to use, easy to spray, sag resistant, fast curing and require only the addition of the proper amount of an appropriate methyl ethyl ketone peroxide to cure. Polycor® 944 isophthalic gel coats are available in a wide range of eye-appealing colors. Customer color matching is available on request. See polynt’s 944-W-005 data sheet for standard White isophthalic gel coat.

Sogel Sanitary Gel coats have been developed from an ISO/NPG resin in combination with pigments and high quality additives. These high performance gel coats offer high resistance to osmosis, making them ideal for sanitary applications. Our line of Sanitary Gel coats are in compliance with the requirements of the American National Standard for plastic baths and showers as well as with the MACT standard of the EPA for the manufacture of composite materials.

Schmelzer Industries FLEXIVEIL 20 mil is a non-woven, continuous strand glass fiber surfacing veil for compound curved composite parts. Process applications include Compression Molding, Continuous Lamination, ,Electrical Flat Sheet, RTM / Vacuum Infusion, Filament Winding, Glass Reinforced Gypsum (GFRG), Other unique applications.

Bathcote® HF 99S Base White gel coats are high performance products formulated for the sanitary ware industry. These gel coats have lower volatile organic compounds VOC than conventional gel coats. Bathcote® HF 99S series gel coats meet the EPA national emission standards for hazardous air pollutants NESHAP : reinforced plastic composites production. Bathcote® HF 99S series gel coats have enabled customers to meet and surpass all requirements of the American national standard for plastic bathtubs, shower receptors, and shower stalls, IAPMO/ANSI Z124.1.2-2005, section 6.1. This product series has received certification from the canadian standards association CSA and is eligible to bear the CSA trademark.

Hollingsworth & Vose Co. 8000116 has the ability to convert specialty fibers into affordable, easy-to-use fabrics. Our Advanced Fiber Nonwovens Group (AFN) delivers outstanding value to aerospace, corrosive tank/pipe, radar signature management, thermal insulation, sporting goods, and EMI shielding applications.

Imedge® PCT 110 Neutral Base are advanced polymer coating technology PCT products that have been formulated to be used as in-mold, exterior coatings for reinforced plastic parts.

RESOLCOAT 7060 is an epoxy clear or pigmented Gelcoat. Which has improved UV resistance, room temperature cure & high gloss and choice of slow and fast hardeners. RESOLCOAT 7060 epoxy gelcoat is specially formulated for the production of structural composites parts or tools requiring high mechanical & abrasion properties and room temperature curing. Two versions are available depending on the pot life needed : 1h45min for large parts or 16min for high production outputs, with a very fast curing time in film for the fast version - closer to a polyester curing time than to a typical epoxy. In both cases, the gelcoat may be ordered in its clear version (mainly for parts) or colored version for tools or parts production.

Nord Composites GC 982 is a polyester gel coat based on isophthalic resin, low VOC emission recommended for the production of quality parts. Pre-accelerated and thixotropic. intended for a machine application. Very good resistance to hydrolysis and UV.

Lavecoat IN is an industrial gelcoat designed as an ideal primer for further painting. It delivers a good surface quality at a very competitive price.

POLYCOR® LSC NPG BR WHITE 9199 - A pre-accelerated gel coat based on Isophthalic Neopentylglycol unsaturated polyester resin. It is cured using MEKP peroxide.This high performance gel coat is formulated for use in sanitary and marine applications or GRP application where resistance to water and blistering are needed.

RESOLCOAT 7060(S) CLEAR is a colorless gelcoat formulated for the production of composite parts. It is intended for the production of parts of apparent carbon aspect or other decorative fabrics when the esthetic aspect is research.

AeroWindTech AWTPP 605 is designed for vacuum bag lay-up composites and metal-to-metal bonding structures. AWTPP-605 is produced from 100% Polyester fiber. The fiber melts at approximately 480°F (249°C). The fabric leaves a medium surface impression for priming and secondary bonding and is available in precision slit widths. This product is available in standard white heat set finish.

Polynt Group 24X series gelcoats are enamel like coatings developed for the composites and fiberglass industry. These gelcoats are used as an enamel coating, similar to paint and are often used to hide any fiberglass pattern inside the part. This series is suitable for water immersion and can be used if high blister resistance is not a major concern. The 24X series gelcoat can also be used to protect the laminate against u.V. Rays. 24X series gelcoat is more like a polyester paint and offers improved cosmetic surface of fiberglass. 24X series gel coats are sag resistant and have a fast curing system.Formulated for spray and roll application.Fast gel time and cure time that provide a good cure.Require only the addition of a proper amount of mekp to cure.Easy to spray and rollgood hiding abilities. These gelcoats are available in a wide range of appealing colors. Color matching is available on request. The numbers following: 24x…indicate the product color code. For parts in contact with water, severe conditions we recommend an npg/iso base gelcoat. For fire retardant properties, we recommend a specific fire retardant base gelcoat. Parts that have to be assembled should be sanded before, to obtain a good adherence. 24 series gelcoat may be applied by brush, roller or spray.

Polynt Group Polygel 32 - orthophthalic gel coat; good wettability; also suitable for transportation market. Main applications areas are composites, industrial sector, mass transports etc.

POLYCOR® ISO BR WHITE 9199 - A pre-accelerated gel coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This gel coat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.

Armorflex® 953 Base White gel coats are high performance, iso/npg products that display desirable high gloss buffback® qualities. Buffback® qualities of these gel coats are demonstrated as:easier, quicker gloss recovery less buffing time to achieve gloss .Higher gloss recovery when polishing back aged or exposed gel coat surfaces.Higher gloss in the repair patch and surrounding refinished area.Higher gloss recoverability from lower gloss molds. Higher gloss can be perceived as a deeper, richer color, providing an enhanced cosmetic appearance to the gel coated part. While offering these benefits, the Armorflex® 953 series gel coats have retained the important construction application qualities expected from ccp gel coats, such as resistance to porosity, tearing, and color separation; sag resistance; consistent liquid properties; excellent patchability; and more. All of these properties contribute to the high quality appeal in FRP parts made from ccp high gloss Armorflex® buffback® gel coats. Gel coats in this series resist weathering and blistering because they are formulated to give high performance against water and certain chemicals, although blister resistance is best with gel coats in the 943 series. Gel coats in the 953 series are made with neopentyl glycol Npg and were primarily developed for sanitary and quality marine applications; however, they should be used in any FRP application where high performance characteristics are desired. 953 gel coats utilize this unique glycol to provide a gel coat that surpasses previous commercial gel coats in its resistance to blistering. They also contain isophthalic acid iso as a cocomponent rather than orthophthalic acid. The isophthalic functionality is used, rather than the orthophthalic to complement the NPG for better end use properties. These gel coats provide durable, reduced maintenance products. These gel coats have enabled customers to meet and surpass all requirements of the American national standard for plastic bathtubs, shower receptors and shower stalls, ANSI Z124.1, .2 and .3 –1995, sec. 6.1.1.

Nord Composites GC 610 is a gel coat based on Isophthalic resin, Thixotropic and pre-accelerated product, Gel coat for quality applications without sagging on vertical walls, Good mechanical resistance, to impact and aging, Good resistance to hydrolysis and UV, LLYOD'S certified .

Polynt Group 53, 53X - very good resistance to yellowing and fading due to sun exposure resistance to thermal change and weathering; can be used in submerged applications resistance to loss of gloss minimal chalking effect over time displays high gloss buff-back qualities excellent tape line sag resistance. Main applications areas are composites, marine, mass transports etc.

NM Gelcoat 275 is a thixotropic, pigmented solvent free epoxy gelcoat for laminates. NM Gelcoat 275 can be used for molds and tools.

POLYCOR® TOOLING PA CLEAR 0200 - A pre-accelerated gel coat base on unsaturated polyester resin. It is cured using MEKP peroxide.This product is recommended for mold manufacturing process and provide durable surfaces to withstand the repeated moldings of GRP laminates.

Polynt Group Polygel 34 - iso NPG gel coat; resistant to water and osmotic blistering. Main applications areas are building and construction, composites, home and domestic applications, industrial sector etc.

Our Polyester Barrier Coat was developed from a proprietary resin blend with high quality raw materials and special additives. This coating acts as a barrier coat between the laminate and the gelcoat. This formulation provides superior osmosis resistance along with enhanced thermal and cracking resistance properties. Sogel’s Polyester Barrier Coats allow accelerating the cure and the demoulding time, while strongly reducing the risk of print through, orange peel and blisters on gelcoat surface.

Our Polyester Tooling Gel coat was formulated from a special polyester resin in combination with high quality additives, providing good high deformation temperature. Sogel’s Polyester Tooling Gel coat provides a permanent surface gloss to the mold, allowing the manufacturing of several parts between polish/wax applications.

POLYCOR® LSC NPG FLEX PA WHITE 9199 - A pre-accelerated gel coat base on unsaturated polyester resin. It is cured using MEKP peroxide.This high performance gel coat is formulated for use in sanitary and marine applications or GRP application where resistance to water and blistering are needed.

Hollingsworth & Vose Co. 8000190 has the ability to convert specialty fibers into affordable, easy-to-use fabrics. Our Advanced Fiber Nonwovens Group (AFN) delivers outstanding value to aerospace, corrosive tank/pipe, radar signature management, thermal insulation, sporting goods, and EMI shielding applications.

Polycryl C-501 Clear is a vinyl ester tooling gel coat, acrylic modified formulation. These gel coats are formulated specifically to meet the stringent specifications of the Marine and Transportation markets. Polycryl gel coats are formulated for spray with standard pressure pot equipment or air assisted airless equipment. Please refer to the “Polycryl Tooling Gel Coat Application Guide” before applying these products. Unacceptable results can occur when used improperly.

Guangzhou Lushan New Materials DP-1 has good stability, wide processing technology, strong adhesion with the outer PP layer, high mechanical strength and aging resistance property, etc.

RESOLTECH 2060 GC ALU is a tooling aluminum epoxy gelcoat. It enables to manufacture tooling that will resist many years to the most demanding heating and cooling post-curing cycles of: heating RTM & pre-preg tooling, high output heat forming of thermoplastics or polymer concrete/solid surface injection tools.

Polycryl B-602HT Black is a high temperature vinyl ester tooling gel coat, acrylic modified formulation. These gel coats are formulated specifically to meet the stringent high temperature specifications of the Marine and Transportation markets. Polycryl gel coats are formulated for spray with standard pressure pot equipment or air assisted airless equipment. Please refer to the “Polycryl Tooling Gel Coat Application Guide” before applying these products. Unacceptable results can occur when used improperly.

Ares P100 NGSL is orthophthalic resin with good reactivity and modulus. Excellent color stability. Good compatibility with fillers and pigments. Light stabilized resin.

Nord Composites GC 511 is a gel coat based on orthophthalic resin, thixotropic and pre-accelerated product, gel coat for the production of parts to be sanded and repainted, Easy sanding - quick drying - no microporosities,.

Polycor® 948 Base White series enamels are formulated to be used as topcoats on fiberglass laminates such as boat and camper shell interiors. Normally enamels are used as interior finishes or to cover a laminate to provide a colored surface. Polycor® 948 series enamels are available in White or any of the Colors listed in the standard color gel coat color deck. Special Colors are available upon request. They can be made from an isophthalic or iso/npg base resin. Consult a polynt composites sales representative to find out more about a particular product.

RESOLCOAT 7080 CSI is an High abrasion resistance gelcoat. Which has high thermomechanical properties and Room temperature release.

Polynt Group 21X, 21X AD cures to form a tough, glossy finish with excellent weather and water resistance; resistance to staining, chalking, crazing and cracking; formulated for brush and roll applications. Main applications areas are composites, marine etc.