Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Composite Materials Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Applications
- Application Method
- Application Method
This gel coat is ready to use by application with air atomised spray equipment. Mix the product slowly but thoroughly for 10 minutes prior to each shift start up. Apply the correct film thickness. A wet film thickness between 400 to 600µm is required ideally in 3 even passes. Check that the correct level of MEKP is added. A level of 1,8% is recommended. Do not use more than 3% or lower than 1,2% MEKP catalyst. Minimum application temperature : 15°C This product is not designed for use with a roller or brush
Properties
- Color
- Mechanical Properties
Value Units Test Method / Conditions Elongation at break 3,9 % ISO 527 H.D.T (NFT ISO 75)......... 79 °C - Tensile strength 45 MPa - - Typical Properties
Value Units Test Method / Conditions Density 1,11 - 1,15 - - Sag Resistance 500 μm - wet - Color Depends colour - - Hide depends colour 700 - 900 μm - wet - Viscosity (25°C - Spindle 5-5 rpm) 100 - 150 dPa.s - Thixotropic Index (5/50 rpm) 6,0 - 7,5 - - Solid Content (15mn at 150°C) 51 - 55 % - - Cured Properties
Value Units Test Method / Conditions Peak Time (200g - 25°C - 1,8% MEKP) 30 - 40 mn - Film cure (500μ - 20°C - 2% MEKP) 70 - 80 mn - Gel Time (200g - 25°C - 1,8% MEKP) 22 - 28 mn - Peak exotherm (°C) (200g - 25°C - 1,8% MEKP) 200 - 240 - -
Storage & Handling
- Storage and Shelf Life
Shelf-life :
4 Months .
Storage :
When the product is sealed in its original packing, stored indoors away from direct sunlight and direct heat sources and ideally at ambient temperature between 15°C and 25°C .