Products

NORSODYNE® C 55377 AL - Unsaturated polyester resin in styrene,Isophthalic-Neopentylic. It is used to produce agglomerated and engineered stones through casting method.

POLYCOR® ISO BR WHITE 9199 - A pre-accelerated gel coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This gel coat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.

ENYDYNE® H 68377 TAE - Unsaturated polyester resin in styrene,DCPD. It is used as general purpose in hand lay up and spray up method.

EPOVIA RF-9000(P) is Bisphenol-A epoxy based vinyl ester resin for primer and it is generally used in Chemical Industry,Industrial sector applicatons

Rezimac® 62-6260 is a silicone modified, soya-based alkyd exhibiting excellent color and gloss retention that lengthens time to repaint. Enamels formulated with this resin meet the requirements of specifications TT-E-490E and TT-E-1593B. Manufactured in North America. All components of this product are listed on the DSL.

Polynt Composites’ ArmorFlex® 953 Series gel coats are high performance products formulated for the fiberglass industry. They are primarily formulated for marine and sanitary applications,but should be used in any application where water and chemical resistance are needed. ArmorFlex® 953 Series also have exceptional gloss and buffing characteristics. While offering these benefits,the ArmorFlex® 953 Series gel coats have retained the important construction application qualities expected from Polynt Composites gel coats,such as resistance to porosity,tearing,and color separation; sag resistance; consistent liquid properties; excellent patchability; and more. These all add up to higher quality appeal in FRP parts made from Polynt’s ArmorFlex® HIGH GLOSS BUFFBACK® gel coats. ArmorFlex® 953 Series gel coats have enabled customers to meet and surpass all requirements of the American National Standard for plastic bathtubs,shower receptors and shower stalls,ANSI Z124.1,.2 and .3 –1995,Sec. 6.1.1. Gel coats in the 953 Series require only the addition of the proper amount of the appropriate methyl ethyl ketone peroxide to cure. ArmorFlex® HIGH GLOSS BUFFBACK® gel coats are available in the same wide range of colors as other POLYCOR® gel coats. Refer to Polynt’s POLYCOR® Color Card for color selection. Standard base white ArmorFlex® is 953WJ340.

Aquamac® 477 styrene acrylic latex polymer was designed specifically for clear wood finishes and provides excellent clarity, hardness and mar resistance. Manufactured in North America. All components of this product are listed on the DSL.

Polynt Group HUP 16/23 RB-7035-V is generally used in building and construction, electronic and electrical applications.

Carbamac® 43-4310 is an oil-modified polyurethane resin with good hardness and abrasion resistance balanced with fast through-dry. Manufactured in North America. All components of this product are listed on the DSL.

Imedge® ECT120 Colors - epoxy compatible technology; MACT compliant gel coat for in-mold use with epoxy resin matrix laminates; deep, dark, rich Colors and high gloss parts; excellent color and gloss recovery after sanding and buffing; excellent scratch and wear resistance; resistance to porosity. Main applications areas are aeolian, textile industry etc.

EPOVIA OPTIMUM® KRF 1001 TAS - Bisphenol-A Epoxy Resin based vinyl ester in styrene. It is used to produce pipes and tanks through hand lay up and spray up method.

DISTITRON® 629 S - Unsaturated polyester resin in styrene,special. It is used to produce furnitures and sanitary through casting,to be used with trihydrate of alumina method.

Polynt Group SMC LS 3800 R25 RF C NERO is a sheet molding compound based on an unsaturated polyester resin, fire retardant grade, reinforced with glass fibers. SMC LS 3800 R25 RF C NERO has been developed for application where is requested anti-static protection SMC LS 3800 R25 RF C NERO joint good mechanical properties mainly for impact resistance. SMC LS 3800 R25 RF C NERO is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group SMC LS 3681 CL1 is a sheet molding compound based on an unsaturated polyester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This SMC has been developed for railway applications. Good mechanical properties and good fire protection grade are combined into the SMC LS 3681 CL1. SMC LS 3681 CL1 complies with uni cei 11170-3 CL1a and electrical applications uni cei 11170-3 lr4. SMC LS 3681 CL1 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polycor® Fireblock 2335 PA White 9199 - intumescent fire retardant properties that conforms to EN 45545 for internal panels in conjunction with fireblock resin systems. Main applications areas are aeronautical, railway sector etc.

NORSODYNE® H 84233 L - Unsaturated polyester resin in styrene,halogenated. It is used to produce building panels,parts with high resistance to fire through hand lay up and spray up,continuous laminating method.

DISTITRON® 458 EN2 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce polymeric concrete through casting,mix with fillers and/or additives method.

Polynt Group 54X series gelcoat are formulated with a particular mix of polyester resins, for use in applications where sun exposure and weather conditions are a factor. They are suitable for boats, truck cabs, water slides and environments with humidity and direct sun exposure. This unique formulation is easier and quicker gloss recovery with less buffing time to achieve gloss.

Duramac® 51-5117 is a medium oil alkyd resin that affords high gloss and good color retention. It can be formulated into high-quality, brushable trade sales and maintenance coatings. Manufactured in North America. All components of this product are listed on the DSL.

POLYCOR® ISO BR - Light stabilized accelerated isophthalic gel coat base with medium reactivity.It is used in general purpose applications,marine,sanitary,etc…

NORSODYNE® O 12335 AL - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce inclusion through casting method.

NORSODYNE® T 16372 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce building panels,isothermal sandwich panels through continuos laminating method.

Polynt Group HUP 19/23 RN-Color is generally used in electronic and electrical applications.

ARMORCOTE® SP - Light stabilized accelerated isophthalic gel coat base with medium reactivity and superior weather resistance.

DISTITRON® 5119 ESX20Q - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce reinforced plastics,general purpose through hand lay up and spray up method.

RECarbon® 90CFP40-400gr - Recycled molding compound based on epoxy resin and reinforced with reinforced with pyrolized carbon fleece designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

DISTITRON® 427 AN2 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce furnitures and sanitary through casting,mix with fillers and/or additives method.

Rezimac® HS 57-5839 is a high solids epoxy ester resin that is designed for industrial air or force-dry enamels. Film properties achieved with this resin include excellent adhesion, very good salt spray performance, and humidity and gasoline resistance. Manufactured in North America.

POLYCOR® 944 - Light stabilized accelerated isophthalic gel coat base with medium reactivity.

ArmorFlex® 99F gel coats are advanced technology polyesters that have been formulated for the fiberglass industry. ArmorFlex® 99F gel coats have lower volatile organic compounds (VOC’s) than standard gel coats.

Polynt Group SMC LP 2500 R33 is a sheet molding compound based on an unsaturated polyester resin, reinforced with glass fibers. This SMC has been developed for structural parts. SMC LP 2500 R33 joint good mechanical properties and good varnish adhesion. SMC LP 2500 R33 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

OPTIMOLD ll MONOCOMPOSANT - Mold construction. 24 hr turnaround,allows better rigidity and tool life. Use with Polycor Tooling gelcoat and skin coat. Main Applications areas are Building and Construction,Electronic and Electrical,Home and Domestic Applications,Industrial sector,Mass Transports,Railway Sector etc.

Polynt Group SMC LS 3022 R30 is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. This SMC has been developed for structural parts. SMC LS 3022 R30 joint good mechanical properties and good surface. SMC LS 3022 R30 complies with BS 6920 water quality. SMC LS 3022 R30 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Duramac® 204-1829 is a medium oil alkyd resin with fast dry and good gloss.Manufactured in North America.

Duramac® 207-1109 is a short oil alkyd resin based on coconut oil. Manufactured in North America. All components of this product are listed on the DSL.

DISTITRON® 3519 A - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce production of gelcoat through mix with fillers and/or additives.