Products in Building Wires & Power Cables

Colorable flame retardant polymeric composition in pellet form, based on EPR rubber containing peroxide curing agent, ready for extrusion in a conventional CV extrusion line. Cables insulated with this compound are recognized for balanced properties including excellent heat, radiation, crush, deformation resistance at high temperatures, and superior flexibility.

Aquagraft® 16-6010 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

Off-white colorable, flame retardant, low voltage composition in pellet form, EPDM-rubber based and containing peroxide curing agent, ready for extrusion in a conventional CV line.

AquaGraft® 1-6008R is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.

Aquagraft® 1-6010 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.

THERMODAN® CP 0110-110 BK is a black, UV resistant, lead free, RoHS compliant, thermoplastic CPE compound. It is designed for use in a wide variety of jacketing applications including wire and cable and tube bundles. This compound has superior fire performance including slow flame propagation and self-extinguishing characteristics. THERMODAN® CP 0110-110 BK should be extruded with a screw configuration designed to optimize process conditions and throughput. This extrusion compound meets or exceeds several industry jacketing specifications including UL 1277 tray cable.

EverGlide® MB2450 is a Thermoplastic polyurethane polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Linear styrene-butadiene thermoplastic elastomer DST L 30-01 is essentially a product of styrene and butadiene block polymerization in hydrocarbon solution in the presence of alkyllithium catalyst. DST L 30-01 is dusted with calcium stearate or amorphous silica. It is containing a no staining stabilizer.

Styrene butadiene synthetic rubber SBR-1502 is essentially a styrene (23.5%) and butadiene (76.5%) copolymer obtained by emulsification method with the use of resin/fatty soaps; non-staining antioxidant

Charmax™ FS 70 is a non-toxic flame retardant / smoke suppressant. This product consists of a proprietary blend of multi-functional ingredients, designed to provide increased cost performance versus traditional materials.

Synthetic styrene-butadiene rubber is obtained by emulsion copolymerisation of butadiene with styrene and filled with TDAE oil

THERMODAN® HF TP519C has been developed specially to offer good processability, very fast extrusion process with very low die drool.

Charmax™ FS BZMA is a non-toxic flame retardant / smoke suppressant composed of a micro sized Zinc Molybdate complex coated onto Magnesium Hydroxide.

PEXIDAN® HF SX612ES pre-grafted base is mixed with catalyst masterbatch CM602 or CM601, in an addition rate between 5% and 10%, depending on extrusion conditions. This system has ambient cure. PEXIDAN® HF SX612ES has been designed to meet the requirements of IEC 60092-351 HF90, EN 50363-5, EI5 type, EN 50525-1 and EN 50525-3-41, with enhanced fire resistance to comply with fire testing on smaller cross sections.

Synthetic cis-butadiene rubber SIBUR BR-1245 is a product of polymerization of butadiene in solution in the presence of neodymium catalyst; 1,4-cis — at least 97%; polydispersity — no more 2.5. The polymer is stabilized by non- staining antioxidant and contains no nitrosamines or substances that may be a source of nitrosamines.

Flame retardant V2 copolymer PP halogen free. For SDS, please contact Addiplast Group using the 'Request Document' button.

Linear styrene-butadiene thermoplastic elastomer DST L 30-01 is essentially a product of styrene and butadiene block polymerization in hydrocarbon solution in the presence of alkyllithium catalyst. DST L 30-01 is dusted with calcium stearate or amorphous silica. It is containing a no staining stabilizer.

Synthetic polybutadiene rubber Synthetic cis-butadiene rubber BR-1203 Ti is the polymerization product of butadiene in solution; in the presence of titanium catalyst; 1,4-cis – at least 90%. The polymer is stabilized with non-staining antioxidant and contains no nitrosamines or substances that may be a source of nitrosamines.

Charmax™ LS Z4AF is a low cost molybdenum-based smoke suppressant synergist for PVC applications. Charmax™ LS Z4AF is specifically designed to reduce smoke in building wire and general purpose wire & cable applications.

Synthetic cis-butadiene rubber BR-1243 Nd HV is a product of polymerization of butadiene in solution in the presence of rare-earth metal-base catalysts with addition of an antioxidant, which contains at least 97% of 1,4-cisbonds. The polymer contains no nitrosamines or substances that may be a source of nitrosamines.

THERMODAN® HF TP519CB has been developed specially to offer good processability, very fast extrusion process with very low die drool.

Kimteks' Phthalate-free DOTP plasticizer has high plasticizing effect. It is generally used with materials like P. V. C in order to plasticise, after being heated to a doughy or plasticised state, to obtain elasticity, brightness for plastic material, generate electrical resistance, to prevent cracking and make surface smooth.

EverGlide® MB3950 is a Ethylene-vinyl acetate polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Shrieve DF 500 Dielectric Fluid is used in high pressure pipe-type cable systems. Shrieve DF 500 is derived from synthetic alkylates and polybutene. The specifications and typical tests are set forth below. DF 500 is also suitable as a cable pulling lubricant for underground cable systems due to its excellent lubricity and compatibility with other dielectric fluids.

Flame retardant V2 polyamide 6 halogen free natural and colored. For SDS, please contact Addiplast Group using the 'Request Document' button.

OMNISTAB® AN 168 is a hydrolytically stable phosphite processing stabilizer. Also acts as an antioxidant.

Styrene butadiene synthetic rubber SBR-1500 is essentially a styrene (23.5%) and butadiene (76.5%) copolymer obtained by emulsification method with the use of resin/fatty soaps.

Santicizer® Platinum P-1400 is a proprietary, non- phthalate plasticizer designed for use in multiple polymer systems and applications. This material can be used in polymers systems including PVC, latex, polyurethane, and polysulfide to name a few. Santicizer® Platinum P-1400 can be used in many applications including foams, sealants, calendering, plastisols, extrusion and films.

Synthetic styrene-butadiene rubber is obtained by emulsion copolymerisation of butadiene with styrene; filled with TDAE oil and stabilized with staining antioxidant

Charmax™ LS Z20A is a cost efficient molybdenum based smoke suppressant synergist for PVC applications. Charmax™ LS Z20A is specifically designed to reduce smoke in halogenated and other polymers including PVC wire & cable and rigid sheet profiles.

Linear styrene-butadiene thermoplastic elastomer DST L 30-01 is essentially a product of styrene and butadiene block polymerization in hydrocarbon solution in the presence of alkyllithium catalyst. DST L 30-01 is dusted with calcium stearate or amorphous silica. It is containing a no staining stabilizer.

SACO AEI Polymers THERMODAN® HF 0103-212 NT is a flame retardant non-halogen thermoplastic wire and cable compound. It is designed for use in a variety of jacketing applications. This compound has superior fire performance including slow flame propagation, low smoke production and low smoke corrosivity. THERMODAN® HF 0103-212NT can be used as a jacket compound on cables recognized under UL 1277 tray cables and can pass flame retardant requirements set forth under UL 1685, IEEE 1202 and FT-4. THERMODAN® HF 0103-212 NT is recognized under UL 2885 as being halogen free. It is natural in color and UV resistant.

THERMODAN® HF TP835 has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP835 have passed the 3m3 smoke density chamber test to IEC 61034-2.

Synthetic rubber SIBUR BR-1500 is styrene (23.5%) and butadiene (76.5%) copolymer obtained by cold emulsion polymerization using the soaps of resin and fatty acids. The polymer is stabilized with non-staining antioxidant and contains no nitrosamines and substances that may become a source of nitrosamines.

PEXIDAN® SX409NT pre-grafted base is mixed with a crosslinking catalyst masterbatch CM401 in the ratio 95:5. The SX409NT:CM401 system has been developed specifically for cables operating up to 36kV. The graft compound contains a non-staining stabilizer and an effective tree retarder, giving outstanding long term retention of dielectric strength. This compound is typically used in conjunction with crosslinkable semi-conducting material for conductor and insulation shields. Crosslinking is obtained by exposure to moist or hot water immersion only.

Styrene butadiene synthetic rubber SBR-1500 is essentially a styrene (23.5%) and butadiene (76.5%) copolymer obtained by emulsification method with the use of resin/fatty soaps.