Products in Building Wires & Power Cables

Synthetic cis-butadiene rubber SIBUR BR-1243 Nd Grade B (LP) is a product of polymerization of butadiene in solution in the presence of neodymium catalyst; 1,4-cis — at least 97%; polydispersity — no more 2.85. The polymer is stabilized by non- staining antioxidant and contains no nitrosamines or substances that may be a source of nitrosamines.

RIANOX® DLTP-FD is a sulfur containing antioxidant for use during polymer processing.

Shrieve DF 100® Dielectric Fluid is used in convection and forced-cooled pipe cable systems. Shrieve DF 100® is also widely used in self-contained cable systems due to its high resistance to gassing under electrical stress. Shrieve DF 100® is derived from synthetic alkylates.

MetaPlast 85 is a reactive ultrafine white alumino-silicate pozzolan formed by calcining very pure hydrous kaolin. Unlike other natural pozzolans, metaplast is water processed to remove unreactive impurities producing an almost 100 percent reactive material. It helps to increase compressive & flexural strength, providing resistance to chemical attack, reducing permeability substantially, maintaining high whiteness, reducing spot-etching, cracking & reducing mottling.

Styrene-butadiene synthetic rubber SSBR-2560 TDAE is the copolymerization product of 1,3-butadiene with styrene in hydrocarbon solvent in the presence of organolithium compounds and it is filled with TDAE oil and stabllized with staining antioxidant. The polymer contains по nitrosamines and substances that may become а source of nitrosamines.

Santicizer® 154 is a liquid, non-halogen, triaryl phosphate ester fire retardant plasticizer used in multiple polymer systems. This plasticizer is similar to tricresyl phosphate in performance properties, but without the neuro-toxicity associated with ortho-cresol materials. Within the Santicizer® family of plasticizers, Santicizer® 154 offers the best fire retardant properties. Santicizer® 154 is a great option in many applications where fire resistance is paramount, but plasticization is not a key property or where plasticization may need to be compensated for.

Synthetic styrene-butadiene rubber is obtained by emulsion copolymerisation of butadiene with styrene and filled with high aromatic oil

Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.

EverGlide® MB1840 is a Polyoxymethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Synthetic polybutadiene rubber Synthetic cis-butadiene rubber BR-1203 Ti is the polymerization product of butadiene in solution; in the presence of titanium catalyst; 1,4-cis – at least 90%. The polymer is stabilized with non-staining antioxidant and contains no nitrosamines or substances that may be a source of nitrosamines.

PEXIDAN® SX523 pre-grafted black base is mixed with crosslinking catalyst masterbatch CM493 or CM497 in the ratio 95:5. This system is carbon loaded, with high UV stabilization, and has been developed especially for usage on overhead power cables insulation according NFC 33-209, “Câble Torsadé”. Crosslinking is obtained by exposure to moist or hot water immersion only.

PEXIDAN® X/T is a low density flame-retardant XLPE system curable by moisture and consists of a silane pre-grafted base compound A-3001 and a flame retardant catalyst masterbatch CAT-005FR. Mixed and extruded in the proper proportions (80:20), the two components result in a material that is curable by exposure to 70-95°C hot water or even ambient moisture. In order to prevent pre-scorching the grafted compound and the catalyst masterbatch must be stored separately and mixed only when used. PEXIDAN® X/T is halogenated but is RoHS compliant.

THERMODAN® HF TP837B has been developed specially to offer good processability, very fast extrusion process with very low die drool.

EverGlide® MB1550 is a Polyethylene terephthalate polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

THERMODAN® HF TP521 has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP521 have passed the 3m3 smoke density chamber test to IEC 61034-2.

THERMODAN® HF TP812NU has been developed specially to offer good processability, fast extrusion process with very low die drool. TP812 is capable of meeting the flame retardant requirements of UL 1666, UL 1685, IEEE 1202, FT-4 in specific fiber optic constructions. It is also recognized as halogen free under UL 2885. It can be extruded using PVC extruders and screws. It possesses excellent tensile and flame retardant properties and meets the requirements of limited toxic and corrosive fume emission

THERMODAN® HF TP837BU has been developed specially to offer good processability, very fast extrusion process with very low die drool.

EverGlide® MB1150 is a acrylonitrile-butadlene-styrene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

OMNISTAB® UV 234 is a UV absorber of the hydroxyphenyl benzotriazole class. Has exceptional light absorbtion and good compatibility in various substrates.

Flamtard V grades are inorganic silicate based flame retardant synergists, chemically modified to control the glass transition temperatures over which they soften (470-500 °C). Above this they convert into a highly viscous molten state in which they can help to reduce the creation and propagation of micro cracks in char formation during polymer combustion. Flamtard V can also improve adhesion of metal oxide residues and oxidized organic materials, leading to mechanically stronger chars. Flamtard V can be used in mica filled silicon based security cables, flame retardant intumescent PVC and PUR materials for the building and construction industry, polyamides and polyolefins. For other polymers, check the potential stability with TGA first. This proven replacement for antimony trioxide can be used alone or in conjunction with other materials in the Flamtard range.

Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.

VynoKlear is a high molecular weight vinyl chloride homopolymer produced by a suspension process with no addition of antioxidant. After mixing with appropriate additives, VynoKlear is suitable for extrusion, calendering or injection molding of semirigid and flexible PVC. Its superior porosity, compatibility, and transparency make it ideal for clear medical products, waterproofing membranes, and innovative flexible consumer goods and cables.

THERMODAN® HF TP832 has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables sheathed with TP832 have received LPCB approval.

Polybutadiene rubber Synthetic cis-butadiene rubber BR-1243 Nd is a product of polymerization of butadiene in solution in the presence of neodymium catalyst; 1,4-cis — at least 97%; polydispersity — no more 2.85. The polymer is stabilized by non- staining antioxidant and contains no nitrosamines or substances that may be a source of nitrosamines.

Synthetic cis-butadiene functionalized rubber SIBUR BR-1243 E-Pro is the polymerization product of butadiene in solution in the presence of neodymium catalyst; 1,4-cis at least 97%; polydispersity not more 2.6. The polymer is stabilized by non-staining antioxidant and contains no nitrosamines or substances that may be a source of nitrosamines. The product is characterized by improved processability.

Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.

Synthetic rubber SBR-1502 is styrene (23.5%) and butadiene (76.5%) copolymer obtained by cold emulsion polymerization using the soaps of resin and fatty

Butadiene-methylstyrene synthetic rubber SBR-1723 TDAE is essentially a product of copolymerization of butadiene with α-methylstyrene in emulsion at a temperature of (4-8) °C where complex emulsifiers based on fatty acid and resin soaps are used. The rubber contains high -aromatic oil and stabilizers of amine-phenol type.

EverGlide® MB1950 is a Polyamide 6 polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Flame retardant V0 (yellow card) polyamide 6 halogen free white RAL 9003. For SDS, please contact Addiplast Group using the 'Request Document' button.

THERMODAN® HF TP870NU has been developed specially to meet general requirements of BS 7655 Section 6.1 type LTS 1.

EverGlide® MB350 is a Linear Low Density Polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB150H is a Polypropylene homopolymer polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.