Products in Building Wires & Power Cables

THERMODAN® HF TP 543CBU has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.

EverGlide® MB1350 is a Polycarbonates polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Santicizer® Platinum P-1700 is a proprietary, non- phthalate plasticizer designed for use in multiple polymer systems such as PVC, latex, polyurethane, and polysulfide to name a few. Santicizer® Platinum P-1700 is a high solvating, fast fusing plasticizer. Santicizer ® Platinum P-1700 shows characteristics of excellent permanence, resistance to exudation and extraction and has very low volatility compared to others in the market.

Charmax™ FS ZMT is a non-toxic flame retardant / smoke suppressant composed of a micro sized Zinc Molybdate complex coated onto Talc.

Styrene butadiene synthetic rubber SBR-1502 is essentially a styrene (23.5%) and butadiene (76.5%) copolymer obtained by emulsification method with the use of resin/fatty soaps.

Charmax™ FS BZMA-T is a non-toxic flame retardant / smoke suppressant composed of a micro-sized zinc molybdate complex coated onto magnesium hydroxide with a hydrophobic coating to promote dispersion in various polymer systems.

EverGlide® MB450 is a low density polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Synthetic styrene-butadiene rubber is obtained by emulsion copolymerisation of butadiene with styrene and filled with TDAE oil

Charmax™ NH-5000 is a halogen-free intumescent flame retardant with high thermal stability and low water solubility based on synergistic phosphorus and nitrogen chemistries.

OMNISTAB® LS 622 is an oligomeric hindered amine light stabilizer (HALS). Furthermore, it is effective as antioxidant and contributes significantly to the long-term heat stability of polyolefins and tackifier resins.

THERMODAN® HF TP837NU has been developed specially to offer good processability, very fast extrusion process with very low die drool.

THERMODAN® HF TP832NU has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables sheathed with TP832 have received LPCB approval.

Charmax™ FR A180 is a flame retardant synergist for a variety of applications. Charmax™ FR A180 is specifically designed to partially or fully replace Antimony Trioxide in PVC applications such as wire & cable, coated fabrics, wallpaper and film. In addition to its flame retardant performance, the use of this product can reduce the level of Titanium Dioxide in formulations containing this pigment.

Styrene butadiene synthetic rubber SBR-1500 is essentially a styrene (23.5%) and butadiene (76.5%) copolymer obtained by emulsification method with the use of resin/fatty soaps; non-staining antioxidant

PEXIDAN® SX554 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM493, in the ratio 95:5, or CM497, in the ratio between 90:10 and 93:7.CM493 is a stronger catalyst suitable for wall thicknesses > 1.5mm and CM497 is a weaker catalyst suitable for small conductor sizes, such as 1 to 4 mm2. The system SX554:CM493 or SX554:CM497, has been approved for use at 1kV and has found uses up to 10kV, it is highly flexible and enables the production of soft rubber cables without the use of continuous vulcanization equipment. Crosslinking is obtained by exposure to moist or hot water immersion only.

Charmax™ LS ZHS is a high purity Zinc Hydroxystannate of fine particle size used as a flame retardant synergist and smoke suppressant in a wide variety of polymers.

OMNISTAB® UV 326 is a UV absorber of the hydroxyphenyl benzotriazole class which imparts good light stability to a variety of polymers.

Charmax™ LS Z8AF is a low cost molybdenum-based smoke suppressant synergist for PVC applications. Charmax™ LS Z8AF is specifically designed to reduce smoke in PVC/Rubber Blends, PVC plastisol adhesives, calendered products, PVC wire & cable applications as well as rigid sheet and profiles.

THERMODAN® HF TP832BU has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables sheathed with TP832 have received LPCB approval.

Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.

PEXIDAN® SX505NT pre-grafted base is mixed with a crosslinking catalyst masterbatch CM493 or CM497, in the ratio 95:5. The SX505NT:CM493 or SX505NT:CM497 systems have passed type-tests for use up to and including 36 kV. The graft compound contains a non-staining stabilizer and an effective tree retarder, giving outstanding long term retention of dielectric strength. This compound is typically used in conjunction with crosslinkable semi-conducting material for conductor and insulation shields. Crosslinking is obtained by exposure to moist or hot water immersion only.

Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.

Styrene butadiene synthetic rubber SBR-1500 is essentially a styrene (23.5%) and butadiene (76.5%) copolymer obtained by emulsification method with the use of resin/fatty soaps.

THERMODAN® HF TP 543CBT has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.

OMNISTAB® AN 1010 is a pentaerythritol tetrakis[3-[3,5-di-tert-butyl-4-hydroxyphenyl]propionate. It is a sterically hindered phenolic primary antioxidant.

Plasticizer DOTP is an ester of 2-ethylhexanol and terephthalic acid, which is used as a commercial plasticizer with high dielectric properties, high cold resistance, reduced volatility.

THERMODAN® HF TP870 has been developed specially to meet general requirements of BS 7655 Section 6.1 type LTS 1.

Charmax™ NH-4000 is a halogen-free intumescent flame retardant with high thermal stability and low water solubility based on synergistic phosphorus and nitrogen chemistries.

PEXIDAN® X/T-UV is a low density flame-retardant XLPE system curable by moisture and consists of a silane pre-grafted base compound A-3001 and a flame-retardant catalyst masterbatch CAT-005FR-UV1. Mixed and extruded in the proper proportions the two-component system results in a material that is curable by exposure to 70-95°C hot water or even ambient moisture. PEXIDAN® X/T-UV is halogenated but is RoHS-compliant. UL44 type insulation may be marked SUNRES or SR in all colors for sizes of 6 AWG and larger. UL4703 photovoltaic insulation may be marked SUNRES in all sizes and colors

THERMODAN® HF TP519C has been developed specially to offer good processability, very fast extrusion process with very low die drool.

Synthetic styrene-butadiene rubber is obtained by low-temperature emulsion copolymerisation of butadiene with styrene and filled with petroleum-based softeners.

Charmax™ AR 57 is designed to eliminate or reduce Antimony Trioxide in flame retardant compounds, for the express purpose of reducing costs, while sustaining performance. Specific use rates will vary by application. For elimination of the price volatility and availability issues: Charmax™ AR 57 does not contain Antimony Trioxide. Charmax™ AR product line are produced from high quality raw material under carefully controlled conditioned to ensure product quality.

Flame retardant V2 homopolymer PP halogen free, UV stabilised. For SDS, please contact Addiplast Group using the 'Request Document' button.

Synthetic styrene-butadiene rubber Styrene-butadiene synthetic rubber SSBR-4040 TDAE is the copolymerization product of 1,3-butadiene with styrene in hydrocarbon solvent in the presence of organolithium compounds and it is filled with TDAE oil and stabilized with staining antioxidant. The polymer contains no nitrosamines and substances that may become a source of nitrosamines.

Synthetic styrene-butadiene rubber is obtained by emulsion copolymerisation of butadiene with styrene and filled with TDAE oil