Products in Building Wires & Power Cables

EverGlide® MB1950 is a Polyamide 6 polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Santicizer® Platinum P-1800 is a proprietary, non- phthalate plasticizer designed for use in polymer systems such as PVC, latex, polyurethane, and polysulfide. Santicizer® Platinum P-1800 is a high solvating, fast fusing plasticizer.

THERMODAN® HF TP812BU has been developed specially to offer good processability, fast extrusion process with very low die drool. TP812 is capable of meeting the flame retardant requirements of UL 1666, UL 1685, IEEE 1202, FT-4 in specific fiber optic constructions. It is also recognized as halogen free under UL 2885. It can be extruded using PVC extruders and screws. It possesses excellent tensile and flame retardant properties and meets the requirements of limited toxic and corrosive fume emission

Butadiene-styrene synthetic statistical rubber SSBR-2560 TDAE HV is a polymerization product of 1,3-butdiene with styrene in hydrocarbon solvent in the pres-ence of anionic initiating agent. Polymer is TDAE oil extended and stabilized with staining antioxidant. The polymer contains no nitrosamines and substances that may become a source of nitrosamines.

EverGlide® MB950 is a High Impact Polystyrene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Flame retardant homopolymer PP halogen free V0, impact modified. For SDS, please contact Addiplast Group using the 'Request Document' button.

Synthetic polybutadiene rubber Synthetic cis-butadiene rubber BR-1203 Ti is the polymerization product of butadiene in solution; in the presence of titanium catalyst; 1,4-cis – at least 90%. The polymer is stabilized with non-staining antioxidant and contains no nitrosamines or substances that may be a source of nitrosamines.

EverGlide® MB250H is a High-density polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Synthetic rubber SBR-1502 is styrene (23.5%) and butadiene (76.5%) copolymer obtained by cold emulsion polymerization using the soaps of resin and fatty

THERMODAN® HF TP521BU has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP521 have passed the 3m3 smoke density chamber test to IEC 61034-2.

Flamtard H (zinc hydroxystannate) is an insoluble, non-hazardous, antimony-free flame retardant synergist that inhibits the development of flames and smoke in polymers. In halogen-containing polymers, the material has both condensed and vapor phase action during combustion. At 220 °C, the material releases 15w% of water, then at higher temperatures (400 °C - 600 °C) zinc and tin ions exert catalytic activity that inhibits the radical chain reaction causing the flame. In halogen-free polymers Flamtard H can increase the char consistency and strength.

RIANOX® DLTP is a sulfur containing antioxidant for use during polymer processing.

THERMODAN® HF TP851 has been developed specially to comply with the requirements of cable specifications BS 7629, BS 6387 CWZ, BS EN 50200, BS 8434-2 & BS 5839-1 Clause 26.2 PH120 Enhanced. TP851 complies with LTS3 in BS 7655.

PEXIDAN® R/T is a low density XLPE system curable by moisture and consists of a silane pre-grafted base compound A-3001 and a catalyst masterbatch CAT-009. Mixed in the proper proportions (95/5) the two components result in a material that is curable by exposure to 70-95°C hot water or even ambient moisture. PEXIDAN® R/T is listed with the Canadian Standards Association for use in RW-90 and RWU-90 XLPE applications and rated to -40ºC. PEXIDAN® R/T is non-flame-retardant, halogen-free and RoHS-compliant.

PEXIDAN® HF SX559 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM540U in a ratio of 97:3 to 95:5. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX559 has been designed to meet the requirements of IEC 60092-351 HF90, EN 50363-5, EI5 type, EN 50525-1, EN 50525-3-41 or other insulation or sheathing applications where high fire retardancy is required. Good CPR performance.

PEXIDAN® SX408 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM401 in the ratio 95:5. If high thermal aging is required, than CM493 should be used instead. Crosslinking is obtained by exposure to moist or hot water immersion only.

THERMODAN® HF TP870B has been developed specially to meet general requirements of BS 7655 Section 6.1 type LTS 1.

THERMODAN® HF TP832NUT has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables sheathed with TP832 have received LPCB approval.

PEXIDAN® HF SX545 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM540U in the ratio 95:5. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX545 has been designed to meet the requirements of IEC 60092-351 HF90, EN 50363-5, EI5 type, EN 50525-1 and EN 50525-3-41.

PEXIDAN® V/T is a low density flame-retardant XLPE system curable by moisture and consists of a silanegrafted base compound A-3001 and a flame-retardant catalyst masterbatch CAT-010FR. Mixed and extruded in the proper proportions (50/50), the two components result in a material that is curable by exposure to hot water. PEXIDAN® V/T is halogenated but is RoHS-compliant.

PEXIDAN® X/T-UV2 is a low density flame-retardant XLPE system curable by moisture and consists of a silane pre-grafted base compound A-3001 and a flame-retardant catalyst masterbatch CAT-047FR-UV2. Mixed and extruded in the proper proportions, the two-component system results in a material curable by exposure to 70-95°C hot water or even ambient moisture. PEXIDAN® X/T-UV2 is halogenated but is RoHS-compliant. Insulation may be marked SUNRES or SR in all colors and in all sizes per UL44 and UL4703. This product is also CSA-listed to CSA C22.2 #38 for RW90, RWU90, RPV90 RPVU90 and CIC, and ‘SR’ and -40C rated.

THERMODAN® HF TP812 has been developed specially to offer good processability, fast extrusion process with very low die drool. TP812 is capable of meeting the flame retardant requirements of UL 1666, UL 1685, IEEE 1202, FT-4 in specific fiber optic constructions. It is also recognized as halogen free under UL 2885. It can be extruded using PVC extruders and screws. It possesses excellent tensile and flame retardant properties and meets the requirements of limited toxic and corrosive fume emission

PEXIDAN® R/T-UV2 is a low density XLPE system curable by moisture and consists of a silane pre-grafted base compound A-3001 and a catalyst masterbatch CAT-288UV. Mixed and extruded in the proper proportions (95:5), the two-component blend results in a material that is curable by exposure to 70-95°C hot water or even ambient moisture. Insulation made with PEXIDAN® R/T-UV2 is rated to -40ºC and may be marked Sunlight Resistant (“-SR”) in all colors and in all sizes per CSA C22.2 No. 38. PEXIDAN® R/T-UV2 is suitable for CSA Type RPV90 and RPVU90 photovoltaic wire per C22.2 No. 271. PEXIDAN® R/T-UV2 is non-flame-retardant, halogen-free and RoHS-compliant

PEXIDAN® HF X/T is a unique low smoke halogen free flame retardant 90°C wet-rated XL-insulation system curable by moisture. It consists of a silane pre-grafted base compound SX651 and a catalyst masterbatch CM540U. Mixed and extruded in the proper proportions (95:5), the two components result in a material that is crosslinkable by exposure to 90°C hot water. PEXIDAN® HF X/T is REACH and RoHS-compliant and is UL 2885 certified to bear the Halogen Free “HF” designation. PEXIDAN® HF X/T is UL-bulletinized and wire made with this insulation system may be marked as Oil Resistant “PR I” and “PR II”, Gas & Oil Resistant “GR I” and “GR II”, “-40C” and “SUNRES” in all colors. This compound will meet a 105°C dry rating.

THERMODAN® HF TP 543COT has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.

ISOTHANE 1080A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

Key to responding to accommodating high value-added plastics. Our antioxidants are used for various applications such as electric wires, high-voltage cables and resins that protect distribution cables. As the diversification of plastic picks up speed, better quality will be sought, including for components used to establish information networks. With our accumulated know-how and technology, we are actively engaged in research and development to meet these needs

Petrolatum T DLC-A is a blend of petrolatum and silica. It functions as a plasticizer and lubricant for NR, SBR, IR, IIR, and polyisobutylenes. Petrolatum T DLC-A incorporates rapidly and aids in filler dispersion.

KV-9010 is a Close match to RAL 9010. It is used in PVC cables, Plasticized PVC extrusion or injection articles.

KMT® MGO-92 industrial-grade magnesium oxide, the product is light yellow, tasteless, non-toxic, slightly soluble in water. KMT-MgO is calcined under exacting conditions, including ore method and chemical method.

PEROXAN BIB-40 EV-G is Di-(2-tert.-butyl-peroxyisopropyl)-benzene 40%, Granules with EVA.PEROXAN BIB-40 EV-G is used for the crosslinking of natural rubber and synthetic rubber, as well as polyolefins.

SAYTEX® 8010 flame retardant is a non-diphenyl oxide based product containing a high level of aromatic bromine.SAYTEX 8010 flame retardant can be used in a wide range of high performance applications. In particular it finds use in styrenic polymers, engineering resins, wire & cable and elastomers.

Blend Colors SPL Deluxe Black PC/23/ARBL is a black masterbatches for key markets such as agricultural, packaging, electronics, textiles and nonwovens, wire & cable, automotive and construction. And our R&D team makes consistent and continuous efforts to give steady products and also invent new formulations as per customer needs.

Natrochem DBP DLC-A is a dibutyl phthalate, silicon-dioxide blend polyisobutylene plasticizer for NR, SBR, CR, NBR, IR and IIR. It gives rapid incorporation, aids dispersion of fillers, and reduces pigment requirements in colored stocks.