Products in Infrastructure, Roads & Paving

Rediset LQ-1102C is a compaction aid for hot and warm mixes. Rediset LQ-1102C allows a reduction in mixing and paving temperatures while providing built in anti-stripping effect.

Rediset LQ-1200 is a compaction aid for hot and warm mixes with lower odor and storage stable in hot binder. Allows a reduction in mixing and paving temperatures while providing active and passive adhesion.

Redicote E-5 HF is a emulsifier and co-emulsifier for cationic bitumen emulsions used for tack, prime, and cold mix applications.

Kling Beta LL is a additive for cold stockpile mixes based on cutback or fluxed bitumen used for pothole patching, reinstatements and repairs.

Redicote E-4819 is a emulsifier for cationic rapid and medium setting bitumen emulsions suitable for chip seal (surface dressing), tack coat and open graded cold mix.

Redicote E-7000 is a emulsifier for anionic and cationic slow set bitumen emulsions suitable for tack, prime, slurry seal, dust oil and cold mix applications. Emulsifier for slow set emulsion used in sealcoat manufacture.

Redicote E-16LV is a liquid active adhesion promoter.

Redicote C-450 is a emulsifier for cationic quick set bitumen emulsions for slurry and micro surfacing. Break retarder for quick set slurry surfacing and micro surfacing.

Redicote E-11 is a emulsifier for cationic slow set asphalt emulsions for tack, prime, slurry seal and cold mix applications. Break retarder for slurry.

Redicote E-4880 is a cationic super slow setting emulsifier providing extended workability for virgin and recycled cold mixes produced in plant.

Redicote 103 is a emulsifier for high viscosity rapid and medium setting cationic bitumen emulsions.

Redicote E-6100 is a emulsifier for anionic bitumen and oil emulsions for tack coat, prime, dust oil and similar applications.

Arquad T-50 HFP is a cationic surfactant based on tallow amine - Tallowtrimethylammonium chloride. Emulsifier and co-emulsifier for cationic bitumen emulsions used for tack, prime, and cold mix applications.

Nouryon Berolamine 1210 (BA-1210) is a blend of higher polyethylene polyamines (isomers of TETA, TEPA, PEHA, and higher) and alkanolamines (AEEA, DEA, Hydroxyethyl DETA, and higher). BA-1210 is used as an intermediate in the manufacture of asphalt additives and epoxy curing agent.

Redicote E-9 is a emulsifier for cationic rapid- and medium-setting bitumen emulsions suitable for chip seal (surface dressing), tack coat and open graded cold mix.

Redicote EM22 is a liquid emulsifier for cationic rapid and medium-setting bitumen emulsions suitable for chipseal, open graded cold mix and tack coat.

Redicote RM007 is a emulsifier for rapid and medium setting cationic bitumen emulsions.

Duomeen HT is an active adhesion promoter in solid (pellet) form for hot bitumen, cut back bitumen or soft bitumen for use in surface dressing (chipseal), and cold and warm mixes.

Redicote E-27 is a liquid cationic emulsifier for tack coats and prime coats.

Redicote E-11 HF-1 is a emulsifier for cationic slow set bitumen emulsions for tack, prime, slurry seal and cold mix applications. Emulsifier for oils and resins used for dust control and rejuvenating. Break retarder for slurry.

Redicote E-16 is a liquid emulsifier for cationic rapid- and medium-setting bitumen emulsions suitable for chip seal, tack coat and open graded cold mix. Active adhesion promoter for pre-coated chips, cutback or soft bitumen.

Redicote E-6945 is a co-emulsifier and stabilizer for slow-setting anionic bitumen emulsions used in sealcoats, slurry seal and non paving applications.

Redicote I-249 is a additive for clay stabilized emulsions and sealcoats derived from coal tar pitch or bitumen to improve resistance to moisture.

Redicote E-62 is a emulsifier for the production of rapid- and medium-setting anionic bitumen emulsions for use in chip seal (surface dressing), tack coat and open-graded cold mix

Redicote C-450-S is a emulsifier for cationic quick set bitumen emulsions for slurry and micro surfacing. Break retarder for quick set slurry surfacing and micro surfacing.

Redicote E-7100 is a faster setting Emulsifier for Cold In-Place recycling (CIR). Emulsifier for cationic slow-setting emulsions suitable for cold mix, tack, prime, slurry seal and dust control. Can be used as an anionic emulsifier in tack and prime coat emulsions.

Flyprene SBS 791H is a clear, linear triblock copolymer based on styrene and butadiene, with a polystyrene content of 30% (wt.%). It is used in asphalt modification, and as a waterproofing material. This product may also find use as a modifier for polymers and adhesives.

Flyprene SBS 791 is a clear, linear triblock copolymer based on styrene and butadiene, with a polystyrene content of 30% (wt.%). It is used in asphalt modification, and as a waterproofing material. This product may also find use as a modifier for polymers and adhesives.

Flyprene SBS 792 is a clear, linear triblock copolymer based on styrene and butadiene, with a polystyrene content of 40% (wt.%). It is used in asphalt modification, and as a waterproofing material. This product may also find use as a modifier for polymers and adhesives.

Flytac 192 is a water-white thermoplastic resin obtained from the polymerization of aromatic and hydrogenation. It is widely applied in hot melt adhesive (HMA), and pressure sensitive adhesive (PSA) because of its good heat resistance and good compatibility with base polymers such as SIS, EVA, SBS, SEBS, and polyolefin. It can also be used in road marking, BOPP masterbatch, and rubber compounding.

MACKAZOLINE® T is a fatty amine that, when neutralized with common acids, functions as a cationic surfactant and emulsifier. It is oil-soluble and water-dispersible, containing no solvents. MACKAZOLINE® T provides excellent emulsification properties and stability. It can also be combined with alkyl halides and sulfates to form quaternary ammonium compounds. Please submit a document request or general inquiry form if you’d like to access an SDS in another language.

Ottopol 1320 is a medium-hard, tough, all-anionic acrylic emulsion with outstanding chemical, abrasion, and wear resistance. The built-in crosslinker provides chemical resistance properties approaching PUD performance. It is also alkali-tolerant and retards the efflorescence of terrazzo and masonry. This product can be used in traffic paint and other exterior applications.

Casiflux A 5000 is a white wollastonite (calcium silicate) powder that is used in glazes and ceramic bodies. It is used as a filler for paints, plastics, welding electrodes, metallurgical powders, cement fiber boards, calcium silicate boards and bricks, and low temperature refractories.

Casiflux M 50050 is a white wollastonite (calcium silicate) powder that is used in glazes and ceramic bodies. It is used as a filler for paints, plastics, welding electrodes, metallurgical powders, cement fiber boards, calcium silicate boards and bricks, and low temperature refractories.

Casiflux A 90 is a white wollastonite (calcium silicate) powder that is used in glazes and ceramic bodies. It is used as a filler for paints, plastics, welding electrodes, metallurgical powders, cement fiber boards, calcium silicate boards and bricks, and low temperature refractories.

Casiflux A 38 is wollastonite (calcium silicate), which helps in reducing the melting temperature of the body and allows for the development of new mineral phases along the firing cycle. This product helps as a reinforcement filler for paints, sealants, road marking paints, brake linings, and gaskets.