Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Industrial Additives Functions
- Technologies
- Product Families
Features & Benefits
- Industrial Additives Features
- Features
- High emulsion viscosity: Redicote E-9 is a special grade of tallowdiamine designed to produce emulsions of the highest quality. Redicote E-9 has for many years been the standard against which other cationic emulsifiers are judged.
- Low use level: 0.15-0.22% is normally sufficient for rapid-set emulsions
- Medium viscosity build: The product provides cationic rapid-set emulsions medium viscosity build suitable for a wide range of bitumen sources
- Highest viscosity building in CRS-2 emulsions saving binder costs. Good emulsion quality at lower dosage, suitable for polymer modified emulsions and provides good adhesion.
- Liquid emulsifier that builds medium viscosity in CRS-2 emulsions
- Liquid emulsifier that builds medium viscosity in rapid set emulsions and provides good adhesion
- Liquid CRS emulsifier for faster break, provides good adhesion and provides good value for the money
- Liquid emulsifier that builds high viscosity in CRS-2 emulsions and also provides faster breaking
- Liquid emulsifier that builds medium viscosity in CRS-2 emulsions, gives good quality emulsions and efficient in terms of dosage.
- 100% active high viscosity building emulsifier that gives high quality emulsions at low dosage.
- 100% active high viscosity building emulsifier that is soluble in acidified water at ambient temperatures
Applications & Uses
- Markets
- Applications
- Applicable Processes
- Industrial Additives End Use
- Product Applications
Products for cationic rapid set emulsions for surface dressing / chipseal primer seal, scrub seal and sand seal, and cationic medium set emulsions for graded aggregate seal
- Dosage
Cationic rapid set emulsion 0.15-0.22% pH 2-4.5, hydrochloric acid
Cationic medium set emulsion 0.25-0.50% pH 1-4.5, hydrochloric acid
Acetic acid may be used
Properties
- Physical Form
- Appearance
- Paste
- Physical Properties
Value Units Test Method / Conditions Density (at 40°C (104°F)) 0.84 (7.02) g/cc (lbs/U.S. gal) - Pour Point 35 °C - Density (at 50°C (122°F)) 0.83 (6.93) g/cc (lbs/U.S. gal) - Density (at 60°C (140°F)) 0.82 (6.83) g/cc (lbs/U.S. gal) - Density (at 70°C (158°F)) 0.81 (6.73) g/cc (lbs/U.S. gal) - Viscosity (at 40°C (104°F)) 50 mPa s (cP) - Viscosity (at 50°C (122°F)) 27 mPa s (cP) - Viscosity (at 60°C (140°F)) 10 mPa s (cP) - Viscosity (at 70°C (158°F)) 7 mPa s (cP) - Flash Point 199 °C - Specifications
Value Units Test Method / Conditions Water Content max. 1 % VE 5.022 Amine Value min. 323 mg KOH/g SM 5.005 Iodine Value 32 - 50 g I2/100 g SM 5.005 - Note
- Acetic acid may be used
Packaging & Availability
Storage & Handling
- Storage Conditions
- Redicote E-9 may be stored in carbon steel tanks. Bulk storage should be maintained at 45-55°C (113-131°F).
- Redicote E-9 contains amines and may cause severe irritation or burns to skin and eyes. Protective goggles and gloves must be worn when handling this product.