Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Industrial Additives Functions
- Technologies
- Product Families
Features & Benefits
- Industrial Additives Features
- Features
- High emulsion viscosity: Emulsions prepared using Redicote E-4819 have significantly higher viscosities, which allow specifications to be met at the minimum bitumen content
- Low use level: 0.15-0.22% is normally sufficient for rapid-set emulsions.
- Highest viscosity building in CRS-2 emulsions saving binder costs. Good emulsion quality at lower dosage, suitable for polymer modified emulsions and provides good adhesion
- Highest viscosity building in CRS-2 emulsions saving binder costs. Good emulsion quality at lower dosage, suitable for polymer modified emulsions and provides good adhesion.
- Medium viscosity building in CRS-2 emulsions.
- Liquid emulsifier that builds medium viscosity in CRS-2 emulsions
- Liquid emulsifier that builds medium viscosity in rapid set emulsions and provides good adhesion
- Liquid CRS emulsifier for faster break, provides good adhesion and provides good value for the money
- Liquid emulsifier that builds high viscosity in CRS-2 emulsions and also provides faster breaking
- Liquid emulsifier that builds medium viscosity in CRS-2 emulsions, gives good quality emulsions and efficient in terms of dosage.
- 100% active high viscosity building emulsifier that gives high quality emulsions at low dosage.
- 100% active high viscosity building emulsifier that is soluble in acidified water at ambient temperatures
Applications & Uses
- Markets
- Applications
- Applicable Processes
- Industrial Additives End Use
- Use Level
- 0.15 - 0.35%
- Dosage
Cationic rapid set emulsion 0.15-0.22% pH 2-4.5 hydrochloric acid
Cationic medium set emulsion 0.25-0.35% pH 1-4.5 hydrochloric acid
Properties
- Physical Form
- Appearance
- Paste
- Physical Properties
Value Units Test Method / Conditions Density (at 30°C (86°F)) 0.84 (6.98) g/cc (lbs/U.S. gal) - Pour Point 30 °C - Density (at 40°C (104°F)) 0.83 (6.91) g/cc (lbs/U.S. gal) - Density (at 50°C (122°F)) 0.82 (6.84) g/cc (lbs/U.S. gal) - Density (at 60°C (140°F)) 0.82 (6.79) g/cc (lbs/U.S. gal) - Viscosity (at 30°C (86°F)) 37 mPa s (cP) - Viscosity (at 40°C (104°F)) 20 mPa s (cP) - Viscosity (at 50°C (122°F)) 9 mPa s (cP) - Viscosity (at 60°C (140°F)) 7 mPa s (cP) - Flash Point min. 175 °C - Specifications
Value Units Test Method / Conditions Water Content max. 1 % VE 5.022 Amine Value 258 - 278 mg KOH/g SM 5.005 - Note
- For regulatory reasons this product is not available within the EU.
Packaging & Availability
Storage & Handling
- Storage Conditions
- Redicote E-4819 may be stored in carbon steel tanks. Bulk storage should be maintained at 35-50°C (95-122°F). Avoid extended heating above 65°C (150°F).
- Redicote E-4819 contains amines and may cause severe irritation or burns to skin and eyes. Protective goggles and gloves must be worn when handling this product.